CAN CGSB-4 2 NO 63 5-2016 Textile test methods Textiles - Determination of formaldehyde - Part 2 Released formaldehyde (vapour absorption method).pdf

《CAN CGSB-4 2 NO 63 5-2016 Textile test methods Textiles - Determination of formaldehyde - Part 2 Released formaldehyde (vapour absorption method).pdf》由会员分享，可在线阅读，更多相关《CAN CGSB-4 2 NO 63 5-2016 Textile test methods Textiles - Determination of formaldehyde - Part 2 Released formaldehyde (vapour absorption method).pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、 CAN/CGSB-4.2 No. 63.5-2016 ISO 14184-2:2011, IDT Supersedes CAN/CGSB-4.2 No. 63.5-2007/ISO 14184-2:1998 International Organization for Standardization ISO 2011. CGSB 2016. All rights reserved. Unauthorized reproduction is strictly prohibited. Textile test methods Textiles Determination of formaldeh

2、yde Part 2: Released formaldehyde (vapour absorption method) (ISO 14184-2:2011, IDT) National Standard of Canada Canadian General Standards Board The CANADIAN GENERAL STANDARDS BOARD (CGSB), under whose auspices this standard has been developed, is a government agency within Public Services and Proc

3、urement Canada. CGSB is engaged in the production of voluntary standards in a wide range of subject areas through the media of standards committees and the consensus process. The standards committees are composed of representatives of relevant interests including producers, consumers and other users

4、, retailers, governments, educational institutions, technical, professional and trade societies, and research and testing organizations. Any given standard is developed on the consensus of views expressed by such representatives.CGSB has been accredited by the Standards Council of Canada as a nation

5、al standards-development organization. The standards that it develops and offers as National Standards of Canada conform to the criteria and procedures established for this purpose by the Standards Council of Canada. In addition to standards it publishes as National Standards of Canada, CGSB produce

6、s standards to meet particular needs, in response to requests from a variety of sources in both the public and private sectors. Both CGSB standards and CGSB national standards are developed in conformance with the policies described in the CGSB Policy and Procedures Manual for the Development and Ma

7、intenance of Standards.CGSB standards are subject to review and revision to ensure that they keep abreast of technological progress. CGSB will initiate the review of this standard within five years of the date of publication. Suggestions for their improvement, which are always welcome, should be bro

8、ught to the notice of the standards committees concerned. Changes to standards are issued either as separate amendment sheets or in new editions of standards.An up-to-date listing of CGSB standards, including details on latest issues and amendments, and ordering instructions, is found in the CGSB Ca

9、talogue at our Web site www.tpsgc-pwgsc.gc.ca/ongc-cgsb/index-eng.html along with more information about CGSB products and services.Although the intended primary application of this standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the standa

10、rd to judge its suitability for their particular purpose.The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using thi

11、s standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. CGSB neither assumes nor accepts any responsibility for any injury or damage that may occur d

12、uring or as the result of tests, wherever performed.Attention is drawn to the possibility that some of the elements of this Canadian standard may be the subject of patent rights. CGSB shall not be held responsible for identifying any or all such patent rights. Users of this standard are expressly ad

13、vised that determination of the validity of any such patent rights is entirely their own responsibility.LanguageIn this Standard, “shall” states a mandatory requirement, “should” expresses a recommendation and “may” is used to express an option or that which is permissible within the limits of this

14、Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their appl

15、ication.Further information on CGSB and its services and standards may be obtained from:The Manager Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6A National Standard of Canada is a standard developed by an SCC- accredited Standards Development Organization (SDO), and ap

16、proved by the Standards Council of Canada (SCC), in accordance with SCCs: Requirements and Guidance-Accreditation for Standards Development Organizations, and Requirements and Guidance-Approval of National Standards of Canada Designation. More information on National Standard requirements can be fou

17、nd at www.scc.ca. An SCC-approved standard reflects the consensus of a number of experts whose collective interests provide, to the greatest practicable extent, a balance of representation of affected stakeholders. National Standards of Canada are intended to make a significant and timely contributi

18、on to the Canadian interest. SCC is a Crown corporation within the portfolio of Industry Canada. With the goal of enhancing Canadas economic competitiveness and social well-being, SCC leads and facilitates the development and use of national and international standards. SCC also coordinates Canadian

19、 participation in standards development, and identifies strategies to advance Canadian standardization efforts. Accreditation services are provided by SCC to various customers, including product certifiers, testing laboratories, and standards development organizations. A list of SCC programs and acc

20、redited bodies is publicly available at www.scc.ca. Users should always obtain the latest edition of a National Standard of Canada from the standards development organization responsible for its publication, as these documents are subject to periodic review.The responsibility for approving standards

21、 as NSCs rests with:Standards Council of Canada 55 Metcalfe Street, Suite 600 Ottawa, Ontario K1P 6L5, CANADAby telephone 819-956-0425 or 1-800-665-2472by fax 819-956-5740by mail CGSB Sales Centre Gatineau, Canada K1A 1G6in person Place du Portage Phase III, 6B1 11 Laurier Street Gatineau, Quebecby

22、email ncr.cgsb-ongctpsgc-pwgsc.gc.caon the Web www.tpsgc-pwgsc.gc.ca/ongc-cgsb/index-eng.htmlHow to order Publications:National Standard of Canada CAN/CGSB-4.2 No. 63.5-2016 ISO 14184-2:2011, IDT Supersedes CAN/CGSB-4.2 No. 63.5-2007/ISO 14184-2:1998 Textile test methods Textiles Determination of fo

23、rmaldehyde Part 2: Released formaldehyde (vapour absorption method) (ISO 14184-2:2011, IDT) CETTE NORME NATIONALE DU CANADA EST DISPONIBLE EN VERSIONS FRANAISE ET ANGLAISE. Published January 2016 by the Canadian General Standards Board Gatineau, Canada K1A 1G6 HER MAJESTY THE QUEEN IN RIGHT OF CANAD

24、A, as represented by the Minister of Public Services and Procurement, the Minister responsible for the Canadian General Standards Board (2016). No part of this publication may be reproduced in any form without the prior permission of the publisher. ICS 59.080.01 CAN/CGSB-4.2 No. 63.5-2016 ISO 14184-

25、2:2011, IDT CGSB 2016 All rights reserved CANADIAN GENERAL STANDARDS BOARD Committee on Textile Test Methods and Terminology (Voting membership at date of approval) Chair Davie, N. Consultant (General interest) General interest category Batcheller, J. University of Alberta Carrick, D. Consultant Hor

26、ne, L. University of Manitoba Man, T.M. Consultant Schumann, E. Consultant Tait, C. National Defence/DSSPM Producer category Adam, C. Tencate Protective Fabrics Lankin, G. LAC-MAC Limited Lawson, L. Davey Textile Solutions ONeill, B. London Hospital Linen Service Inc. Orzel, A. Lincoln Fabrics Ltd.

27、Taylor, V. Invista (Canada) Co. Regulator category Korpan, M. Health Canada, CPSD Risk Management Bureau Szabo, J. Industry Canada User category Andersson, C. Health Canada, CPSD Risk Assessment Bureau Bowie, K. Public Works and Government Services Canada DEntremont, E. Royal Canadian Mounted Police

28、 Izquierdo, V. Textile Technologies Centre Litva, M. Canada Border Services Agency Smith, I. Exova Group Ltd. Tebbs, C. International Drycleaners Congress Zhao, J. National Defence/QETE Secretary (non-voting) Grabowski, M. Canadian General Standards Board Acknowledgment is made for the translation o

29、f this National Standard of Canada by the Translation Bureau of Public Services and Procurement Canada. i CGSB 2016 All rights reserved CAN/CGSB-4.2 No. 63.5-2016 ISO 14184-2:2011, IDT Supersedes CAN/CGSB-4.2 No. 63.5-2007/ISO 14184-2:1998 Preface to the National Standard of Canada This National Sta

30、ndard of Canada has been prepared by the CGSB Committee on Textile Test Methods and Terminology and has been approved as a National Standard of Canada by the Standards Council of Canada. It is identical in content and in layout with International Standard ISO 14184-2, Textiles Determination of forma

31、ldehyde P a r t 2 : R e l e a s e d f o r m a l d e h y d e ( v a p o u r a b s o r p t i o n method), published 2011-08-15 by the International Organization for Standardization (ISO), and is reprinted with the permission of ISO. The international standard was reviewed by the CGSB committee to deter

32、mine its suitability for Canadian use. It was agreed to use it in total without editorial changes. Throughout this standard, the words “National Standard of Canada” are to be understood as replacing the words “International Standard” wherever they appear. Some terminology and conventions are not ide

33、ntical to those used in other test methods within CAN/CGSB-4.2 Textile Test Methods. For example, the comma is used throughout this standard as a decimal marker rather than the point. The following National Standards of Canada correspond to the referenced ISO standards: CANADA ISO CAN/CGSB-4.2 No. 2

34、 ISO 139 The testing and evaluation of a product against this method may require the use of materials and equipment that could be hazardous. This method does not purport to address all the safety aspects associated with its use. Anyone using this method has the responsibility to consult the appropri

35、ate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use. The CGSB National Standards of Canada may be obtained from the Canadian General Standards Board, Sales Centre, Gatineau, Canada K1A 1G6. Telephone 819

36、-956-0425 or 1-800-665-2472. Fax 819-956-5740. E-mail ncr.cgsb-ongctpsgc-pwgsc.gc.ca. Web site www.tpsgc-pwgsc.gc.ca/ongc-cgsb/index-eng.html. The International Standards may be obtained from IHS Global Canada Ltd., 200-1331 MacLeod Trail SE, Calgary, Alberta T2G 0K3, telephone 613-237-4250 or 1-800

37、-267-8220, fax 613-237-4251, Web site . Copyright Notice The Canadian adoption of this International Standard as a National Standard of Canada contains information copyright protected by the Canadian General Standards Board. All rights reserved. No part of this National Standard of Canada may be rep

38、roduced in any form without the prior permission of the Canadian General Standards Board. ISO material is reprinted with permission. Requests for permission to reproduce this National Standard of Canada or parts thereof should be addressed to: The Manager Standards Division Canadian General Standards Board Gatineau, Canada K1A 1G6 Copyright violators will be prosecuted to the full extent of the law.