BS PD IEC TS 62763-2013 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire《通过控制导向线使用PWM (脉冲宽度调制) 的导向功能和控制导向线》.pdf

《BS PD IEC TS 62763-2013 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire《通过控制导向线使用PWM (脉冲宽度调制) 的导向功能和控制导向线》.pdf》由会员分享，可在线阅读，更多相关《BS PD IEC TS 62763-2013 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire《通过控制导向线使用PWM (脉冲宽度调制) 的导向功能和控制导向线》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPilot function through a controlpilot circuit using PWM (pulsewidth modulation) and a controlpilot wirePD IEC/TS 62763:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted

2、 without license from IHS-,-,-National forewordThis Published Document is the UK implementation of IEC/TS 62763:2013.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/69, Electric vehicles.A list of organizations represented on this committee can be obtained onrequest t

3、o its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 82419 7ICS 43.120Compliance with a British Standard

4、cannot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 January 2014.Amendments/corrigenda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD IEC/TS 62763:2013Copyright British Standards In

5、stitution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-IEC/TS 62763 Edition 1.0 2013-12 TECHNICAL SPECIFICATION Pilot function through a control pilot circuit using PWM (pulse width modulation) and a con

6、trol pilot wire INTERNATIONAL ELECTROTECHNICAL COMMISSION V ICS 43.120 PRICE CODE ISBN 978-2-8322-1281-3 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. PD IEC/TS 62763:2013Copyright British S

7、tandards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 2 TS 62763 IEC:2013(E) CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Control pilot circuit. 7 3.1 General

8、7 3.2 Typical pilot electric equivalent circuit 8 3.3 Simplified pilot electric equivalent circuit 9 3.4 Other requirements 9 4 Requirements for parameters 10 5 Test procedures for immunity of EV supply equipment to wide tolerances on the pilot wire and the presence of high frequency data signals on

9、 the pilot wire . 25 5.1 General 25 5.2 Constructional requirements of the EV simulator 25 5.3 Test procedure . 25 5.4 Test list Oscillator frequency and generator voltage test . 26 5.5 Duty cycle test . 27 5.6 Pulse wave shape test . 27 5.7 Sequences diagnostic normal charge cycle . 27 5.8 Open ear

10、th wire test. 29 5.9 Test of short circuit values of the voltage . 29 5.10 Example of a test simulator of the vehicle (informative) 29 5.11 Optional hysteresis test 31 5.11.1 General 31 5.11.2 Test sequence for hysteresis between states B and C 32 5.11.3 Test sequence for hysteresis between states C

11、-E, D-E . 32 5.11.4 Test sequence for hysteresis between states C-D . 32 Figure 1 Typical control pilot electric equivalent circuit . 8 Figure 2 Simplified control pilot electric equivalent circuit 9 Figure 3 State machine diagram for typical control pilot . 15 Figure 4 State machine diagram for sim

12、plified control pilot . 15 Figure 5 Normal operation cycle. 27 Figure 6 Simplified control pilot cycle . 28 Figure 7 Optional charge cycle test 29 Figure 8 Example of a test circuit (EV simulator) 30 Table 1 Maximum allowable carrier signal voltages on pilot wire 10 Table 2 Control pilot circuit par

13、ameters (see Figures 1 and 2) 10 Table 3 Vehicle control pilot circuit values and parameters 11 Table 4 System states detected by the EV supply equipment . 12 Table 5 State behavior . 14 Table 6 List of sequences 16 PD IEC/TS 62763:2013Copyright British Standards Institution Provided by IHS under li

14、cense with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-TS 62763 IEC:2013(E) 3 Table 7 Pilot duty cycle provided by EV supply equipment . 24 Table 8 Maximum current to be drawn by vehicle . 24 Table 9 Test resistance values . 25 Table 10

15、Parameters of control pilot voltages. 26 Table 11 Test parameters of control pilot signals at the measure point according to Figure 8 27 Table 12 Normal charge cycle test . 28 Table 13 Position of switches . 31 Table 14 Initial settings of the potentiometer at the beginning of each test . 31 PD IEC/

16、TS 62763:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 4 TS 62763 IEC:2013(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PILOT FUNCTION THROUGH A CONTROL PILO

17、T CIRCUIT USING PWM (PULSE WIDTH MODULATION) AND A CONTROL PILOT WIRE FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote interna

18、tional co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter

19、referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participat

20、e in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an inte

21、rnational consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reaso

22、nable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC

23、 Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of confor

24、mity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publicati

25、on. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or f

26、or costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct

27、application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare In

28、ternational Standards. In exceptional circumstances, a technical committee may propose the publication of a technical specification when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts, or the subject is still under technical develop

29、ment or where, for any other reason, there is the future but no immediate possibility of an agreement on an International Standard. Technical specifications are subject to review within three years of publication to decide whether they can be transformed into International Standards. IEC/TS 62763, w

30、hich is a technical specification, has been prepared by IEC technical committee 69: Electric road vehicles and electric industrial trucks. Edition 2 of IEC 61851-1, published in 2010 is presently undergoing revision. This Technical Specification will be valid until the publication of Edition 3 of IE

31、C 61851-1. In this document, the numbers in square brackets at the beginning of a sentence, help to identify requirements. PD IEC/TS 62763:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted with

32、out license from IHS-,-,-TS 62763 IEC:2013(E) 5 The text of this technical specification is based on the following documents: Enquiry draft Report on voting 69/242/DTS 69/254/RVC Full information on the voting for the approval of this technical specification can be found in the report on voting indi

33、cated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data relate

34、d to the specific publication. At this date, the publication will be transformed into an International Standard, reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. PD IEC/TS 62763:2013Copyright British Standards I

35、nstitution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 6 TS 62763 IEC:2013(E) INTRODUCTION The pilot wire function described in this document has been designed as a control mechanism for the supply of

36、electrical energy to electric vehicles, principally for the charging of the traction batteries of the vehicle. It concerns all charging systems that ensure the pilot function with a pilot wire circuit with PWM for mode 2, mode 3 and mode 4 charging as described in the IEC 61851 series. As indicated

37、in the foreword, Edition 2 of IEC 61851-1, published in 2010 is presently undergoing revision. This Technical Specification will be valid until the publication of Edition 3 of IEC 61851-1. PD IEC/TS 62763:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontroll

38、ed Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-TS 62763 IEC:2013(E) 7 PILOT FUNCTION THROUGH A CONTROL PILOT CIRCUIT USING PWM MODULATION AND A CONTROL PILOT WIRE 1 Scope This Technical Specification describes the pilot wire function designed as a control

39、mechanism for the supply of electrical energy to electric vehicles, principally for the charging of the traction batteries of the vehicle. It concerns all charging systems that ensure the pilot function with a pilot wire circuit with PWM for mode 2, mode 3 and mode 4 charging as described in the IEC

40、 61851 series. This document describes the functions and sequencing of events for this circuit based on the recommended typical implementation circuit parameters. The parameters indicated also ensure the interoperability of control pilot wire systems designed according to SAE J1772. This document is

41、 not applicable to vehicles using pilot functions that are not based on a PWM signal and a pilot wire. NOTE 1 In the context of this document the words “EV supply equipment” designate any one of the following: the AC EV supply equipment in mode 3, the in cable control box in mode 2 and/or the DC EV

42、supply equipment in mode 4. NOTE 2 The control pilot wire is a supplementary conductor, in addition to the power lines linking the vehicle to EV supply equipment via the vehicle coupler. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document

43、and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61851-1:2010, Electric vehicle conductive charging system Part 1: General requirements IEC 61

44、851-231, Electric vehicle conductive charging system Part 23: D.C. electric vehicle charging station ISO/IEC 151181(all parts), Road vehicles Vehicle to grid communication interface 3 Control pilot circuit 3.1 General Two types of pilot functions are possible: simplified and typical. Simplified pilo

45、t function fulfils the basic requirements that are described in 6.4.1 of IEC 61851-1:2010. Typical pilot function fulfils the basic requirements that are described in 6.4.1 of IEC 61851-1:2010 and also allows the selection of charging rate as described in 6.4.2. of IEC 61851-1:2010. 1To be published

46、. PD IEC/TS 62763:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 8 TS 62763 IEC:2013(E) Additional requirements for implementation in mode 4 system are describe

47、d in IEC 61851-23. Figures 1 and 2 show examples of the principle of operation of the control pilot circuit. The EV (electric vehicle) supply equipment may cut off the power after at least 5 s in case the EV will use more current than the duty cycle indicates. It is recommended to de-energize the sy

48、stem, if the measured current exceeds the current signalled by duty cycle with a tolerance of 10 %. RA03-010 The circuit parameters shall be designed in accordance with Table 2, Table 3 and 3.4. RA03-020 The functionality of the pilot line shall follow the requirements defined in Table 2, Table 6, Table 7, and Table 8. This information may be provided to the pilot function controller by an energy management system. 3.2 Typical pilot electric equivalent circuit CsOscillatorVoltagemeas