BS PD CEN TS 54-32-2015 Fire detection and fire alarm systems Planning design installation commissioning use and maintenance of voice alarm systems《火灾探测和警报系统 声警报系统的规划 设计 安装 调试 使用和维.pdf

《BS PD CEN TS 54-32-2015 Fire detection and fire alarm systems Planning design installation commissioning use and maintenance of voice alarm systems《火灾探测和警报系统 声警报系统的规划 设计 安装 调试 使用和维.pdf》由会员分享，可在线阅读，更多相关《BS PD CEN TS 54-32-2015 Fire detection and fire alarm systems Planning design installation commissioning use and maintenance of voice alarm systems《火灾探测和警报系统 声警报系统的规划 设计 安装 调试 使用和维.pdf（84页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPD CEN/TS 54-32:2015Fire detection and fire alarmsystemsPart 32: Planning, design, installation,commissioning, use and maintenance ofvoice alarm systemsPD CEN/TS 54-32:2015 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN/TS 54-32:20

2、15.Voice alarm systems are installed in many large buildings in Europe where large numbers of people who may not be trained to evacuate (normally members of the public) are present. These buildings include sports arenas, stadiums, galleries, theatres, cinemas and other places of entertainment. They

3、also include transport hubs such as railway stations, airports and ports.Most European countries do not have specific guidance on the planning, design, installation, commissioning, use and maintenance of voice alarm systems. CEN/TS 54-32 has been written to provide guidance for these countries whils

4、t avoiding conflict with existing national installation guidance documents such as BS 5839-8:2013 and BS 7827:2011 in the UK.CEN/TS 54-32 will be useful in the UK to give guidance when variations from the recommendations of BS 5839-8:2013 (see Clause 7) and the recommendations of BS 7827:2011 (see C

5、lause 18) are needed because it contains up-to-date information, especially on measuring intelligibility, on the use of auxiliary mains power supplies such as UPS and generators, and on transmission paths and networking.The UK participation in its preparation was entrusted by Technical Committee FSH

6、/12, Fire detection and alarm systems, to Subcommittee FSH/12/5, Alarm devices, voice alarm evacuation sub-systems and emergency voice communications.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all

7、the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 84468 3ICS 13.220.20; 13.320Compliance with a British Standard cannot confer immunity from legal obligations.This B

8、ritish Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2015.Amendments issued since publicationDate Text affectedPD CEN/TS 54-32:2015TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 54-32 July 2015 ICS 13.220.20; 13.3

9、20 English Version Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems Systmes de dtection et dalarme incendie - Partie 32 : Planification, conception, installation, mise en service, utilisation et maintenance des

10、 systmes dalarme vocale Brandemeldanlagen - Teil 32: Projektierung, Montage, Inbetriebnahme, Betrieb und Instandhaltung von Sprachalarmsystemen This Technical Specification (CEN/TS) was approved by CEN on 14 March 2015 for provisional application. The period of validity of this CEN/TS is limited ini

11、tially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make

12、the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN members are the national standards bod

13、ies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, S

14、pain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldw

15、ide for CEN national Members. Ref. No. CEN/TS 54-32:2015 EPD CEN/TS 54-32:2015CEN/TS 54-32:2015 (E) 2 Contents Page Foreword . 5 Introduction 6 1 Scope . 7 2 Normative references . 7 3 Terms and definitions, symbols and abbreviations 7 3.1 Terms and definitions. 7 3.2 Symbols and abbreviations . 14

16、4 General . 14 4.1 Use of this Technical Specification 14 4.2 Guideline format . 14 4.3 Project phases 15 4.4 Safety requirements . 16 4.5 Warranties and guarantees 16 4.6 Documentation 16 4.7 Responsibility . 16 4.8 Qualifications 16 5 Concept (Assessment of needs) . 17 5.1 Responsibility . 17 5.2

17、Intention and purpose 17 5.3 Risk-assessment . 17 5.4 Consultation 18 5.5 Local, regional or national requirements . 19 5.6 Documentation 19 5.7 Parts of the building needing cover 21 5.8 Extent of manual control 22 6 Planning and design . 22 6.1 Responsibility of the designer 22 6.2 Devices connect

18、ed to the VAS 22 6.3 Faults 22 6.4 Modes and conditions of operation 23 6.5 Intelligibility . 25 6.6 Special risks 29 6.7 VAS control and indicating equipment (VACIE) 30 6.8 Interface between the fire detection and alarm system and the VAS . 30 6.9 Initiation of the voice alarm condition 31 6.10 Pow

19、er supply . 31 6.11 Standby power supply 32 6.12 Power amplifiers . 33 6.13 Loudspeakers 33 6.14 Hierarchical VAS . 35 6.15 Distributed VAS . 36 7 Installation . 37 7.1 General . 37 7.2 Responsibility of the installer 37 7.3 Location of equipment . 37 7.4 Installation of the VACIE 37 7.5 Cable insta

20、llation 38 PD CEN/TS 54-32:2015CEN/TS 54-32:2015 (E) 2 Contents Page Foreword . 5 Introduction 6 1 Scope . 7 2 Normative references . 7 3 Terms and definitions, symbols and abbreviations 7 3.1 Terms and definitions. 7 3.2 Symbols and abbreviations . 14 4 General . 14 4.1 Use of this Technical Specif

21、ication 14 4.2 Guideline format . 14 4.3 Project phases 15 4.4 Safety requirements . 16 4.5 Warranties and guarantees 16 4.6 Documentation 16 4.7 Responsibility . 16 4.8 Qualifications 16 5 Concept (Assessment of needs) . 17 5.1 Responsibility . 17 5.2 Intention and purpose 17 5.3 Risk-assessment .

22、17 5.4 Consultation 18 5.5 Local, regional or national requirements . 19 5.6 Documentation 19 5.7 Parts of the building needing cover 21 5.8 Extent of manual control 22 6 Planning and design . 22 6.1 Responsibility of the designer 22 6.2 Devices connected to the VAS 22 6.3 Faults 22 6.4 Modes and co

23、nditions of operation 23 6.5 Intelligibility . 25 6.6 Special risks 29 6.7 VAS control and indicating equipment (VACIE) 30 6.8 Interface between the fire detection and alarm system and the VAS . 30 6.9 Initiation of the voice alarm condition 31 6.10 Power supply . 31 6.11 Standby power supply 32 6.1

24、2 Power amplifiers . 33 6.13 Loudspeakers 33 6.14 Hierarchical VAS . 35 6.15 Distributed VAS . 36 7 Installation . 37 7.1 General . 37 7.2 Responsibility of the installer 37 7.3 Location of equipment . 37 7.4 Installation of the VACIE 37 7.5 Cable installation 38 PD CEN/TS 54-32:2015CEN/TS 54-32:201

25、5 (E) 3 7.6 Inspection and testing of wiring 40 7.7 Loudspeaker installation 41 7.8 Inspection and testing of loudspeaker circuits 41 7.9 Documentation. 41 8 Commissioning 41 8.1 General . 41 8.2 Responsibility 42 8.3 Prerequisite documentation . 42 8.4 Commissioning 42 8.5 Documentation. 45 8.6 Ope

26、rator instructions 45 9 Verification . 46 9.1 General . 46 9.2 Responsibility 46 9.3 Documentation. 47 10 Third-party approval 47 10.1 General . 47 10.2 Approval by authorities having jurisdiction and others 47 10.3 Approval procedures 47 10.4 Periodic inspection by an approval body . 48 11 Acceptan

27、ce . 48 12 Use 49 12.1 Responsibility 49 12.2 Periodic tests . 50 12.3 Repair 51 12.4 Logbook 51 13 Maintenance . 51 13.1 General . 51 13.2 Responsibility 51 13.3 Documentation. 51 13.4 Prevention of unwanted activation 52 13.5 Spare parts . 52 13.6 Maintenance at intervals not exceeding 6 months 53

28、 13.7 Maintenance at intervals not exceeding 12 months 54 13.8 On appointment of a new maintenance organization 55 13.9 After a fire . 55 14 Modification or extension . 55 14.1 General . 55 14.2 Responsibility 55 14.3 Third-party approval 56 14.4 Extent of compliance 56 14.5 Documentation. 56 Annex

29、A (informative) Model documents . 57 A.1 Design certificate . 58 A.2 Installation certificate 59 A.3 Commissioning certificate 60 A.4 Verification certificate (optional) 61 A.5 Acceptance certificate 62 A.6 Maintenance certificate . 63 PD CEN/TS 54-32:2015CEN/TS 54-32:2015 (E) 4 A.7 Modification cer

30、tificate . 64 A.8 Logbook . 65 Annex B (informative) VAS safety levels and categories . 66 B.1 VAS safety levels 66 B.2 Category of VAS 67 Annex C (normative) Measurement of speech intelligibility 69 C.1 Methods of measurement 69 C.2 Measurement procedure 69 Annex D (informative) Guidance for Prescr

31、iptive Loudspeaker Design . 73 D.1 Decibels (dB) . 73 D.2 Sensitivity 73 D.3 Coverage angle . 73 D.4 Frequency Response 73 D.5 Maximum Sound Pressure Level 74 D.6 Loudspeaker Types 74 Annex E (informative) Standby battery calculations 76 E.1 Formula for calculating battery capacity . 76 E.2 Formula

32、for calculating I2. 77 Bibliography . 80 PD CEN/TS 54-32:2015CEN/TS 54-32:2015 (E) 4 A.7 Modification certificate . 64 A.8 Logbook . 65 Annex B (informative) VAS safety levels and categories . 66 B.1 VAS safety levels 66 B.2 Category of VAS 67 Annex C (normative) Measurement of speech intelligibilit

33、y 69 C.1 Methods of measurement 69 C.2 Measurement procedure 69 Annex D (informative) Guidance for Prescriptive Loudspeaker Design . 73 D.1 Decibels (dB) . 73 D.2 Sensitivity 73 D.3 Coverage angle . 73 D.4 Frequency Response 73 D.5 Maximum Sound Pressure Level 74 D.6 Loudspeaker Types 74 Annex E (in

34、formative) Standby battery calculations 76 E.1 Formula for calculating battery capacity . 76 E.2 Formula for calculating I2. 77 Bibliography . 80 PD CEN/TS 54-32:2015CEN/TS 54-32:2015 (E) 5 Foreword This document (CEN/TS 54-32:2015) has been prepared by Technical Committee CEN/TC 72 “Fire detection

35、and fire alarm systems”, the secretariat of which is held by BSI. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN

36、-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, H

37、ungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. PD CEN/TS 54-32:2015CEN/TS 54-32:2015 (E) 6 Introduction Guidelines covering sound systems for use dur

38、ing an emergency are published by different organizations within Europe. The intention of this Technical Specification is to draw together these documents and provide up-to-date guidelines for planning, design, installation, commissioning, use, maintenance and modification of emergency sound systems

39、 throughout Europe. Sound systems for use in emergency, whether automatically triggered, manually triggered, or both, are commonly called voice alarm systems. It is not intended that this Technical Specification should override existing local, regional or national regulations. It is expected for a c

40、onsiderable (and as yet unspecified) period that these guidelines will coexist with other codes. However, it is hoped that the availability of a common set of guidelines will assist in the harmonization of practice and standards for voice alarm systems throughout Europe. This document gives recommen

41、dations. These recommendations can be made mandatory by being specified within other document(s). For example, an authority having jurisdiction empowered under local, regional or national legislation can require compliance with this document. Equally a contract between a purchaser and a supplier can

42、 specify compliance that may then become mandatory under contract law. The purpose of a voice alarm system is to provide intelligible warning to person(s) within, or in the vicinity of, a building in which an emergency has occurred and to enable such person(s) to take appropriate measures according

43、to an emergency management plan. Voice alarm systems are often used instead of alarm sounders (see EN 54-3) because the meaning of an alarm signal may not be clear to untrained building occupants and so time may be spent deciding what it means and then further time may be spent deciding what to do.

44、This document contains specific recommendations for the design, installation, commissioning, use, and maintenance of voice alarm systems and is based on the format used in CEN/TS 54-14. The main principles on which the guidelines are based are given in the body of this Technical Specification. Detai

45、led recommendations by which these principles may be satisfied are given in annexes. PD CEN/TS 54-32:2015CEN/TS 54-32:2015 (E) 6 Introduction Guidelines covering sound systems for use during an emergency are published by different organizations within Europe. The intention of this Technical Specific

46、ation is to draw together these documents and provide up-to-date guidelines for planning, design, installation, commissioning, use, maintenance and modification of emergency sound systems throughout Europe. Sound systems for use in emergency, whether automatically triggered, manually triggered, or b

47、oth, are commonly called voice alarm systems. It is not intended that this Technical Specification should override existing local, regional or national regulations. It is expected for a considerable (and as yet unspecified) period that these guidelines will coexist with other codes. However, it is h

48、oped that the availability of a common set of guidelines will assist in the harmonization of practice and standards for voice alarm systems throughout Europe. This document gives recommendations. These recommendations can be made mandatory by being specified within other document(s). For example, an

49、 authority having jurisdiction empowered under local, regional or national legislation can require compliance with this document. Equally a contract between a purchaser and a supplier can specify compliance that may then become mandatory under contract law. The purpose of a voice alarm system is to provide intelligible warning to person(s) within, or in the vicinity of, a building in which an emergency has occurred and to enable such person(s) to take appropriate measures according to an emergency management plan. Voice alarm systems are often used instead of alarm sounders (see