BS PD CEN TR 15378-4-2017 Energy performance of buildings Heating systems and DHW in buildings Explanation and justification of EN 15378-3 Module M3-10 M8-10《建筑物能源性能 建筑物内供暖系统和DHW E.pdf

《BS PD CEN TR 15378-4-2017 Energy performance of buildings Heating systems and DHW in buildings Explanation and justification of EN 15378-3 Module M3-10 M8-10《建筑物能源性能 建筑物内供暖系统和DHW E.pdf》由会员分享，可在线阅读，更多相关《BS PD CEN TR 15378-4-2017 Energy performance of buildings Heating systems and DHW in buildings Explanation and justification of EN 15378-3 Module M3-10 M8-10《建筑物能源性能 建筑物内供暖系统和DHW E.pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Energy performance of buildings - Heating systems and DHW in buildingsPart 4: Explanation and justification of EN 15378-3, Module M3-10, M8-10PD CEN/TR 15378-4:2017TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT

2、CEN/TR 15378-4 May 2017 ICS 91.120.10; 91.140.10 English Version Energy performance of buildings - Heating systems and DHW in buildings - Part 4: Explanation and justification of EN 15378-3, Module M3-10, M8-10 Performance nergtique des btiments - Performance nergtique mesure - Partie 4: Explication

3、 et justification de lEN 15378-3, Modules M3-10, M8-10 Heizungsanlagen und Wasserbasierte Khlanlagen in Gebuden - Heizungsanlagen und Trinkwarmwasseranlagen in Gebuden - Teil 4: Begleitender TR zur EN 15378-3 (Messungen der Energieeffizienz) This Technical Report was approved by CEN on 27 February 2

4、017. It has been drawn up by the Technical Committee CEN/TC 228. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

5、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre:

6、 Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 15378-4:2017 ENational forewordThis Published Document is the UK implementation of CEN/TR 153784:2017.The UK participation in its preparati

7、on was entrusted to Technical Committee RHE/24, Heating systems and water based cooling systems in buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. User

8、s are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 95139 8ICS 91.140.10; 91.120.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the au

9、thority of the Standards Policy and Strategy Committee on 30 June 2017.Amendments/corrigenda issued since publicationDate Text affectedPUBLISHED DOCUMENTPD CEN/TR 153784:2017TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15378-4 May 2017 ICS 91.120.10; 91.140.10 English Version Energy

10、 performance of buildings - Heating systems and DHW in buildings - Part 4: Explanation and justification of EN 15378-3, Module M3-10, M8-10 Performance nergtique des btiments - Performance nergtique mesure - Partie 4: Explication et justification de lEN 15378-3, Modules M3-10, M8-10 Heizungsanlagen

11、und Wasserbasierte Khlanlagen in Gebuden - Heizungsanlagen und Trinkwarmwasseranlagen in Gebuden - Teil 4: Begleitender TR zur EN 15378-3 (Messungen der Energieeffizienz) This Technical Report was approved by CEN on 27 February 2017. It has been drawn up by the Technical Committee CEN/TC 228. CEN me

12、mbers are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Port

13、ugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation

14、in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN/TR 15378-4:2017 EPD CEN/TR 153784:2017CEN/TR 15378-4:2017 (E) 2 Contents Page European foreword . 5 Introduction 6 1 Scope 8 2 Normative references 8 3 Terms and definitions . 8 4 Symbols, subscripts and abbreviat

15、ions. 9 4.1 Symbols . 9 4.2 Subscripts . 9 4.3 Abbreviations . 9 5 Description of the methods . 9 5.1 Available procedures . 9 5.2 Assessment of measured heating and domestic hot water delivered energy . 9 5.2.1 Output of the method . 9 5.2.2 Optional procedures 9 5.2.3 Validation of measured rating

16、 . 10 5.2.4 Correction according to standard use and/or climate . 10 5.3 Assessment of measured boiler combustion efficiency . 11 5.4 Assessment of boiler seasonal efficiency 11 5.5 Domestic hot water system efficiency 11 5.6 Other measurement methods 11 6 Measured delivered energy for heating and d

17、omestic hot water . 12 6.1 Rationale and output data 12 6.2 Assessment and measurement periods and intervals 14 6.3 Input data 15 6.3.1 Data on delivered energy carrier amount . 15 6.3.2 Constants and physical data . 15 6.4 Assessment of delivered and exported energy carriers amount 15 6.4.1 General

18、 . 15 6.4.2 Metered energy carriers (electricity, gas, district heating and cooling) 16 6.4.3 Liquid fuels in tanks or small containers 16 6.4.4 Solid fuels 16 6.4.5 Fuel with hour counter . 16 6.4.6 Electrical energy measurement 16 6.5 Data about boundary conditions 17 6.5.1 General . 17 6.5.2 Clim

19、atic data 17 6.5.3 Building use schedule and internal temperature. 17 6.5.4 Domestic hot water used . 17 6.6 Converting to delivered and exported energy . 17 6.7 Preparation of data 18 6.7.1 Reporting raw data 18 6.7.2 Validating raw data for measured delivered energy normalization . 18 6.8 Interpol

20、ation of seasonal measurements . 18 6.8.1 Data preparation 18 PD CEN/TR 153784:2017CEN/TR 15378-4:2017 (E) 3 6.8.2 Separating uses and services 18 6.8.3 Space heating delivered energy correction for indoor temperature and climate 18 6.8.4 Seasonal values 19 6.8.5 Interpolation of seasonal delivered

21、energy 19 6.8.6 Measured specific heat loss Hmeas 20 6.8.7 Validation criteria 20 6.9 Energy signature method 20 6.9.1 Data preparation and rationale of the method 20 6.9.2 Linear regression in Heating mode 21 6.9.3 Linear regression in non-heating mode . 21 6.9.4 Heating start external temperature

22、. 21 6.9.5 Estimated internal temperature during heating season 21 6.9.6 Standardized average power during the heating season . 21 6.9.7 Standardized delivered energy during the heating season . 21 6.9.8 Validation criteria 22 6.10 Special cases . 22 6.10.1 Introduction 22 6.10.2 Multi-fuel installa

23、tions . 22 6.10.3 Heat meters are available 22 6.10.4 District heating 22 6.10.5 Variable heat generation efficiency . 22 6.11 Plain reporting. 23 6.12 Exported energy 23 6.13 Reporting . 23 6.14 Limits of application 23 6.15 Linear regression sub procedure 23 6.16 Examples 23 7 Boiler combustion ef

24、ficiency 24 7.1 Output data . 24 7.2 Input data 24 7.3 Measuring procedure 24 7.4 Combustion efficiency calculation 24 7.4.1 General . 24 7.4.2 Sensible heat loss factor ch,on24 7.4.3 Condensation latent heat recovery factor cond. 24 7.5 Reporting . 25 8 Assessment of measured heating generation eff

25、iciency 25 8.1 Output data . 25 8.2 Input data 25 8.3 Available methods 26 8.3.1 Boiler cycling method . 26 8.3.2 Total stand-by losses method 26 8.4 Boiler cmb (average load) determination 26 8.4.1 Introduction 26 8.4.2 Fuel use method 26 8.4.3 Operation hour counter method . 26 8.5 Estimation of l

26、oss factors . 26 8.5.1 Losses through the envelope (radiation losses) 26 8.5.2 Losses through the chimney with burner off 26 8.5.3 Total stand-by losses . 26 8.6 Reporting . 27 9 Assessment of measured domestic hot water delivered energy and system efficiency . 27 PD CEN/TR 153784:2017CEN/TR 15378-4

27、:2017 (E) 4 9.1 Domestic hot water delivered energy 27 9.1.1 Domestic hot water volume measurement not available 27 9.1.2 With water measurement . 27 9.2 Domestic hot water efficiency . 27 9.3 Reporting 27 10 Assessment of measured heat pump efficiency 27 11 Assessment of the energy performance for

28、other services . 27 12 Quality control 27 13 Compliance check. 28 14 Method selection 28 15 Worked out examples . 28 16 Application range . 28 16.1 Energy performance assessment . 28 16.2 Inspection . 28 16.3 Recommendations (tailored rating) . 29 17 Regulation use . 29 18 Information on the accompa

29、nying spreadsheet . 29 19 Results of the validation tests 29 20 Quality issues . 29 20.1 Assessment of measured delivered energy 29 20.2 Combustion efficiency 29 20.3 Seasonal efficiency estimation 29 Annex A (informative) Template for choices, input data and references . 30 Annex B (informative) De

30、fault choices, input data and references 31 Annex C (informative) Template for the input data preparation and presentation . 32 Annex D (informative) Calculation flowcharts . 33 Annex E (informative) Calculation examples 35 E.1 Seasonal data interpolation . 35 E.1.1 General . 35 E.1.2 Source data .

31、35 E.1.3 Input data 39 E.1.4 Calculation 41 E.1.5 Output data . 45 E.1.6 Regression plot . 46 E.2 Energy signature method 47 E.2.1 General . 47 E.2.2 Source data . 47 E.2.3 Input data 47 E.2.4 Calculation 49 E.2.5 Output data . 53 E.2.6 Regression plot . 54 Annex F (informative) History of this docu

32、ment . 55 Bibliography . 56 PD CEN/TR 153784:2017CEN/TR 15378-4:2017 (E) 5 European foreword This document (CEN/TR 15378-4:2017) has been prepared by Technical Committee CEN/TC 228 “Heating systems and water based cooling systems in buildings”, the secretariat of which is held by DIN. Attention is d

33、rawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the Euro

34、pean Free Trade Association. PD CEN/TR 153784:2017CEN/TR 15378-4:2017 (E) 6 Introduction The set of EPB standards, technical reports and supporting tools: In order to facilitate the necessary overall consistency and coherence, in terminology, approach, input/output relations and formats, for the who

35、le set of EPB-standards, the following documents and tools are available: a) a document with basic principles to be followed in drafting EPB-standards: CEN/TS 16628, Energy Performance of Buildings Basic Principles for the set of EPB standards 1; b) a document with detailed technical rules to be fol

36、lowed in drafting EPB-standards: CEN/TS 16629, Energy Performance of Buildings Detailed Technical Rules for the set of EPB-standards 2; c) the detailed technical rules are the basis for the following tools: 1) a common template for each EPB-standard, including specific drafting instructions for the

37、relevant clauses; 2) a common template for each technical report that accompanies a EPB standard or a cluster of EPB standards, including specific drafting instructions for the relevant clauses; 3) a common template for the spreadsheet that accompanies each EPB standard, to demonstrate the correctne

38、ss of the EPB calculation procedures. Each EPB-standards follows the basic principles and the detailed technical rules and relates to the overarching EPB-standard, EN ISO 52000-1:2017. One of the main purposes of the revision of the EPB-standards is to enable that laws and regulations directly refer

39、 to the EPB-standards and make compliance with them compulsory. This requires that the set of EPB-standards consists of a systematic, clear, comprehensive and unambiguous set of energy performance procedures. The number of options provided is kept as low as possible, taking into account national and

40、 regional differences in climate, culture and building tradition, policy and legal frameworks (subsidiarity principle). For each option, an informative default option is provided (Annex B). Rationale behind the EPB technical reports: There is a high risk that the purpose and limitations of the EPB s

41、tandards will be misunderstood, unless the background and context to their contents and the thinking behind them is explained in some detail to readers of the standards. Consequently, various types of informative contents are recorded and made available for users to properly understand, apply and na

42、tionally implement the EPB standards. If this explanation would have been attempted in the standards themselves, the result is likely to be confusing and cumbersome, especially if the standards are implemented or referenced in national or regional building codes. Therefore each EPB standard is accom

43、panied by an informative technical report, like this one, where all informative content is collected: to ensure a clear separation between normative and informative contents (see CEN/TS 16629 2), to avoid flooding and confusing the actual normative part with informative content, PD CEN/TR 153784:201

44、7CEN/TR 15378-4:2017 (E) 7 to reduce the page count of the actual standard, and to facilitate understanding of the set of EPB standards. This was also one of the main recommendations from the European CENSE project 4 that laid the foundation for the preparation of the set of EPB standards. This Tech

45、nical Report: This Technical Report accompanies the standard EN 15378-3:2017 on the assessment of measure measured delivered energy for space heating and domestic hot water preparation. The first part of this Technical Report, up to Clause 13 and all annexes up to Annex D have the same numbering as

46、EN 15378-3:2017. Each clause in this CEN/TR 15378-4 is related to the same clause in EN 15378-3:2017. The role and the positioning of the accompanied standard(s) in the set of EPB standards is defined in the Introduction to the standard. Accompanying spreadsheet(s): Concerning the accompanied standa

47、rd EN 15378-3:2017, the following spreadsheets were produced: one spreadsheet on space heating measured delivered energy assessment using the seasonal data interpolation method (see 6.8); one spreadsheet on space heating measured delivered energy assessment using the energy signature method (see 6.9

48、); one spreadsheet on domestic hot water measured delivered energy assessment; one spreadsheet on boiler efficiency assessment, both combustion efficiency and seasonal efficiency. In this Technical Report, two examples of space heating measured delivered energy assessment are included. History of th

49、is Technical Report and the accompanied standard: EN 15378-3:2017 is the first edition of a standard on measured energy performance. It includes provisions already included in several previous standards like EN 15603:2008 (energy signature method) and EN 15378:2007 (measurement of combustion efficiency and estimation of boiler seasonal efficiency) and others. This Technical Report has been drafted as part of Mandate 480 of the EC to CEN. References in the text of the standard are given as module codes that are deta