BS PD CEN TR 15120-2005 Tanks for transport of dangerous goods — Guidance and recommendations for loading transport and unloading《危险物品运输用槽罐车 装载，运输和卸载的指南和建议》.pdf

《BS PD CEN TR 15120-2005 Tanks for transport of dangerous goods — Guidance and recommendations for loading transport and unloading《危险物品运输用槽罐车 装载，运输和卸载的指南和建议》.pdf》由会员分享，可在线阅读，更多相关《BS PD CEN TR 15120-2005 Tanks for transport of dangerous goods — Guidance and recommendations for loading transport and unloading《危险物品运输用槽罐车 装载，运输和卸载的指南和建议》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、PUBLISHED DOCUMENT PD CEN/TR 15120:2005 Tanks for transport of dangerous goods Guidance and recommendations for loading, transport and unloading ICS 13.300; 23.020.20 Licensed Copy: Wang Bin, na, Tue Apr 25 03:07:04 BST 2006, Uncontrolled Copy, (c) BSIPD CEN/TR 15120:2005 ISBN 0 580 46646 9 National

2、 foreword This Published Document is the official English language version of CEN/TR 15120:2005. The UK participation in its preparation was entrusted to Technical Committee AUE/18, Tanks for transport of dangerous goods, which has the responsibility to: aid enquirers to understand the text; present

3、 to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtai

4、ned on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility o

5、f the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a Published Document does not of itself confer immunity from legal obligations. S

6、ummary of pages This document comprises a front cover, an inside front cover, the CEN/TR title page, pages 2 to 37 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments This Publis

7、hed Document was published under the authority of the Standards Policy and Strategy Committee on 7 December 2005 BSI 7 December 2005 Licensed Copy: Wang Bin, na, Tue Apr 25 03:07:04 BST 2006, Uncontrolled Copy, (c) BSITECHNICALREPORT RAPPORTTECHNIQUE TECHNISCHERBERICHT CEN/TR15120 August2005 ICS13.3

8、00;23.020.20 EnglishVersion TanksfortransportofdangerousgoodsGuidanceand recommendationsforloading,transportandunloading Citernesdestinesautransportdematiresdangereuses Lignesdirectricesetrecommandationspourlechargement, letransportetledchargement TanksfrBefrderunggefhrlicherGterLeitlinienund Empfeh

9、lungenfrBefllung,BefrderungundEntladung ThisTechnicalReportwasapprovedbyCENon10April2005.IthasbeendrawnupbytheTechnicalCommitteeCEN/TC296. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia

10、,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2005CEN Allrightsofexploitationinany

11、formandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.CEN/TR15120:2005:E Licensed Copy: Wang Bin, na, Tue Apr 25 03:07:04 BST 2006, Uncontrolled Copy, (c) BSIPD CEN/TR 15120:2005 2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Terms and definitions.4 4 Bottom loading gan

12、try function and operation 5 5 Tank truck function and equipment.8 6 Electrical equipment .13 7 Gantry tank truck system interfaces.13 8 Conditions of operation13 9 Safe loading pass14 10 Discharge. 14 Annex A (normative) Tank connection envelope.17 Annex B (normative) Vapour flow performance test .

13、20 Annex C (normative) Information plate 26 Annex D (normative) Overfill prevention sensor setting.28 Annex E (informative) Illustration of when an explosive atmosphere might be present or might arise during loading operations.30 Annex F (informative) Safe loading pass scheme .32 Bibliography.36 Lic

14、ensed Copy: Wang Bin, na, Tue Apr 25 03:07:04 BST 2006, Uncontrolled Copy, (c) BSIPD CEN/TR 15120:2005 3 Foreword This Technical Report (CEN/TR 15120:2005) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. Attenti

15、on is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. Licensed Copy: Wang Bin, na, Tue Apr 25 03:07:04 BST 2006, Uncontrolled Copy, (c) BSI4 1 Scop

16、e This Technical Report provides guidance and recommendations to enable the transfer of product and vapour between the loading gantry, the tank truck and the service station. The European Parliament and Council Directive 94/63/EC (VOC Directive) requires operators to ensure that petroleum vapours ar

17、e not emitted into the atmosphere during loading and unloading. The recommendations and guidance given in this document are intended to assist users in meeting the requirements of this Directive. This Technical Report acknowledges that, for climatic and logistical reasons alternative technical solut

18、ions are commonly used in the Arctic Region. This Technical Report gives guidance and recommendations for loading at terminals and discharge at service stations or customer premises of tank trucks transporting dangerous goods (liquid petroleum fuels) which have a vapour pressure not exceeding 110 kP

19、a, at 50 C (including petrol), and which have no sub- classification as toxic or corrosive. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest editi

20、on of the referenced document (including any amendments) applies. EN 12972, Tanks for transport of dangerous goods Testing, inspection and marking of metallic tanks. EN 14564:2004, Tanks for transport of dangerous goods Terminology. 3 Terms and definitions For the purposes of this Technical Report,

21、the terms and definitions given in EN 14564:2004 and the following apply. 3.1 arctic region region comprising Finland, Norway and Sweden 3.2 authorization to load authorization of a tank truck loader by a terminal operator to load the required goods into the tank truck following the verification of

22、his or her competence including any required certification and its associated validity 3.3 driver person in charge of the tank truck, having responsibility for driving and who might or might not also be responsible for its loading and/or discharge 3.4 overfill filling of a tank truck or one or more

23、of its compartments to the extent that the total volume loaded into a compartment exceeds the maximum permitted volume PD CEN/TR 15120:2005 Licensed Copy: Wang Bin, na, Tue Apr 25 03:07:04 BST 2006, Uncontrolled Copy, (c) BSI5 3.5 overfill prevention system gantry-mounted controller connected to sen

24、sors mounted at a pre-determined high level in a tank truck that will, in the event that a sensor detects liquid, signal the gantry control valve to cease loading flow in order to prevent the overfilling of the tank truck 3.6 overloading loading of a tank truck such that its total weight exceeds tha

25、t permitted by local road regulations, or the load imposed by one or more axles exceeds the local maximum authorized weight for that axle 3.7 tank truck truck which conforms to the definition of either tank-vehicle, demountable tank, tank container or tank swap body given in EN 14564 3.8 safe loadin

26、g pass permit issued to a tank truck upon verification by inspection that its design and maintenance satisfy safety and gantry compatibility requirements 3.9 tank truck loader person responsible for loading the tank truck in accordance with the load plan NOTE The tank truck loader is sometimes calle

27、d the filler. 3.10 tank truck operator legal entity/company that provides funds, tank trucks and personnel in order to transport dangerous goods as described in Clause 1 3.11 terminal operator person or company in charge of terminal operations, including the responsibility for storage, handling, loa

28、ding of dangerous goods and providing the information with regard to the specifications of the product to be loaded 3.12 maximum permitted volume maximum volume of the compartment, or in total NOTE Maximum permitted volume means the same as the term “degree of filling“, which is used in the European

29、 Agreement concerning the International Carriage of Dangerous Goods by Road (ADR). 3.13 frustrated delivery delivery where the driver is unable to unload the intended volume 4 Bottom loading gantry function and operation 4.1 Gantry loading equipment 4.1.1 General Arrangements to permit loading of ta

30、nk trucks, equipped according to this document, should be available on at least one gantry at each arctic loading facility. PD CEN/TR 15120:2005 Licensed Copy: Wang Bin, na, Tue Apr 25 03:07:04 BST 2006, Uncontrolled Copy, (c) BSI6 4.1.2 Overfill prevention system Loading gantries should have meters

31、 to determine the volume loaded into a tank truck compartment. The primary overfill prevention system should comprise the pre-setting of the gantry loading meter by the tank truck loader for each tank truck compartment separately before it is loaded. 4.1.3 Level detection Secondary shut off (overfil

32、l prevention) system The gantry-based components of the overfill prevention system should conform to EN 13922. The plug should be able to connect with the connector within the tank connection envelope as described in Annex A. It should be considered as a secondary overfill prevention system in the e

33、vent that the primary volume limiting system (meter pre-set) does not operate. NOTE In the arctic region, 2-wire thermistor sensors with a positive temperature coefficient conforming to national standards and individual tank truck mounted shut-off devices are commonly used. 4.1.4 Coupler for bottom

34、loading Couplers for bottom loading should be operationally compatible with adaptors for bottom loading and should be able to connect with them within the tank connection envelope as described in Annex A. Where tank trucks fitted with valves which can be closed against product flow are loaded, a sur

35、ge pressure of 2 500 kPa should not compromise the integrity or functions of the coupler. In order to prevent the accumulation of any electrostatic charge, there should be electrical resistance of less than 10 ohms across a metallic coupler and adaptor, and less than 10 6ohms in other cases, when co

36、nnected. NOTE In the arctic region, couplers for bottom loading with the same functionality but able to connect with an adaptor for bottom loading with a reduced diameter are commonly used. 4.1.5 Vapour collection system The vapour collection coupler should conform to EN 13081 and should be able to

37、connect with the vapour collection adaptor within the tank connection envelope as described in Annex A. NOTE In the arctic region, a vapour collection coupler with the same functionality but with a reduced diameter are commonly used. 4.1.6 Drive away restriction A system to prevent unauthorized move

38、ment of a tank truck may be provided. 4.2 Loading conditions 4.2.1 Maximum loading rates per loading arm The maximum loading rate per loading arm should not exceed the values given in Table 1. It is recommended that the tank truck be suitable for high speed loading (see 5.2.1). NOTE Table 1 has been

39、 adapted from CLC/TR 50404 and gives the flow rates for diameters of pipe used in loading systems including tank truck pipe work such that the accumulation of the electrostatic charge on the surface of the liquid does not exceed acceptable limits. Maximum loading rates (vd 0,5) are given for design

40、purposes; loading rates may be reduced for safety reasons depending upon specific circumstances. The reduced values given in brackets apply to non high speed loading tank trucks. PD CEN/TR 15120:2005 Licensed Copy: Wang Bin, na, Tue Apr 25 03:07:04 BST 2006, Uncontrolled Copy, (c) BSI7 Table 1 Condu

41、ctivity Conductivity pS/m Known 50 Known 10 Known 50 and all other fuels ( 0,38) (1 400) (1 800) 0,5 1 900 2 400 0,5 1 900 2 400 0,35 1 300 1 650 Diesel or gasoil with S 50 ( 0,38) (1 400) (1 800) ( 0,25) (940) (1 200) NOTE 1 Flow rates given in this table prevent the accumulation of the electrostat

42、ic charge on the surface of the liquid reaching unacceptable levels. NOTE 2 Information on product sulphur content and conductivity would normally be provided by the terminal operator. NOTE 3 Values in brackets apply to non high speed loading tank-vehicles. NOTE 4 The maximum loading rates given in

43、Table 1 may be reduced for safety reasons depending upon specific circumstances. amg/kg = mass fraction (ppm). bDN = diameter (nominal) of loading pipe (mm). cv d = flow velocity in metres per second m/sec nominal internal pipe diameter in metres m. NOTE 5 DN = d 1 000. dReduced flow rates are appli

44、cable in arctic or severe winter conditions. 4.2.2 Maximum liquid pressure Where systems include valves that can be closed against the loading flow, including pressure-balanced valves, it should be ensured that: the maximum static pressure in the pipework upstream of the isolating valve does not exc

45、eed 1 Mpa; pressure-balanced footvalves conform to EN 13316. 4.2.3 Maximum vapour back pressure The maximum back-pressure created by the gantry vapour recovery system should be 5,5 kPa (55 mbar). NOTE 1 The maximum back pressure of 5,5 kPa is a requirement of the VOC Directive 94/63/EC. NOTE 2 Contr

46、ols may be provided to ensure that this maximum back pressure is not exceeded. PD CEN/TR 15120:2005 Licensed Copy: Wang Bin, na, Tue Apr 25 03:07:04 BST 2006, Uncontrolled Copy, (c) BSI8 4.3 Loading operations Before loading is permitted, procedures should exist to ensure that there is authorization

47、 to load and to accommodate the loading of both empty and not-empty compartments. For not-empty compartments, the volume and grade of the retained goods should be determined prior to loading. If the surface on which the tank truck is standing is not conductive (see CLC/TR 50404 for guidance), the ta

48、nk truck should be bonded to earth before any operation (for example opening fill covers, connecting loading couplers) is carried out. The bonding resistance between the tank truck and the gantry should be 10 6ohms or less. Procedures should exist to ensure that overloading does not occur. 5 Tank tr

49、uck function and equipment 5.1 Tank truck compartment compartment identification The tank truck compartments should be clearly identified with the numbering starting from the front of the tank (see Annex C). 5.2 Tank truck compartment Control of static electricity 5.2.1 General As an electrostatic charge is generated w