BS ISO IEC 24779-9-2015 Information technology Cross-jurisdictional and societal aspects of implementation of biometric technologies Pictograms icons and symbols for use with biome.pdf

《BS ISO IEC 24779-9-2015 Information technology Cross-jurisdictional and societal aspects of implementation of biometric technologies Pictograms icons and symbols for use with biome.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 24779-9-2015 Information technology Cross-jurisdictional and societal aspects of implementation of biometric technologies Pictograms icons and symbols for use with biome.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS ISO/IEC 24779-9:2015Information technology Cross-jurisdictional and societalaspects of implementationof biometric technologies Pictograms, icons and symbolsfor use with biometric systemsPart 9: Vascular applicationsBS ISO/IEC 24779-9:2015 BRITISH STANDARDNational foreword

2、This British Standard is the UK implementation of ISO/IEC24779-9:2015.The UK participation in its preparation was entrusted to TechnicalCommittee IST/44, Biometrics.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to i

3、nclude all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 78718 8ICS 01.080.50; 35.040Compliance with a British Standard cannot confer immunity fromlegal obligations

4、.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO/IEC 24779-9:2015Information technology Cross-jurisdictional and societal aspects of implementati

5、on of biometric technologies Pictograms, icons and symbols for use with biometric systems Part 9: Vascular applicationsTechnologie de linformation Aspects socitaux et trans-juridictionnels de la mise en oeuvre de technologies biomtriques Pictogrammes, icnes et symboles pour lutilisation avec les sys

6、tmes biomtriques Partie 9: Applications vasculairesINTERNATIONAL STANDARDISO/IEC24779-9Reference numberISO/IEC 24779-9:2015(E)First edition2015-11-01 ISO/IEC 2015BS ISO/IEC 24779-9:2015ii ISO/IEC 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC 2015, Published in SwitzerlandAll rights re

7、served. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either

8、ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO/IEC 24779-9:2015(E)BS ISO/IEC 24779-9:2015ISO/IEC 24779-9:2015(E)Fore

9、word ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 14 Symbols and icons of vascular image recognition . 15 Symbols for use with vascular image recognition . 25.1 Generic symbol (vascular) 25.2 Symbols with body-parts . 25.2.1 Hand 25.2.2 Finger . 3Annex A (informative)

10、 Methodology . 4Bibliography 5 ISO/IEC 2015 All rights reserved iiiContents PageBS ISO/IEC 24779-9:2015ISO/IEC 24779-9:2015(E)ForewordISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardiza

11、tion. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutua

12、l interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.The procedures used to develop this document and

13、those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (se

14、e www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of t

15、he document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific ter

16、ms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.The committee responsible for this document is ISO/IEC JTC 1, Information techno

17、logy, Subcommittee SC 37, Biometrics.ISO/IEC 24779 consists of the following parts, under the general title Information technology Cross jurisdictional and societal aspects of implementation of biometric technologies Pictograms, icons and symbols for use with biometric systems: Part 1: General princ

18、iples Part 9: Vascular applicationsThe following part is under preparation: Part 4: Fingerprint applicationsiv ISO/IEC 2015 All rights reservedBS ISO/IEC 24779-9:2015ISO/IEC 24779-9:2015(E)IntroductionA major public application of biometric authentication today is likely to be passports but in the n

19、ear future, it is probable that biometric recognition will be used in other public terminals. These terminals will be located in a variety of environments including unsupervised, a terminal supervised by an attendant, or only partly supervised; for example, an attendant supervising a number of termi

20、nals or terminals observed via CCTV and an audio link. Language-independent symbols and icons that indicate the biometric modality and illustrate actions and behaviour required will be particularly important for occasional users. In general, it is desirable for there to be more than one mode of pres

21、entation (e.g. visual and audible or tactile). Only visual presentation is addressed in this International Standard.A standard family of symbols and icons is required since in the absence of widely used standard symbols and icons, manufacturers will adopt their own proprietary printed symbols and ic

22、ons for display on screens. This is likely to lead to confusion for public users of self-service terminals.The vascular image recognition technology has been described in ISO/IEC/TR 24741 as one of the current biometric technologies.From the view of the application system, it has been applied to ban

23、k ATMs for counterfeit prevention of the electronic bank card and which has been shown to be effective. Moreover, there are other applications, such as physical and logical access control. ISO/IEC 2015 All rights reserved vBS ISO/IEC 24779-9:2015BS ISO/IEC 24779-9:2015Information technology Cross-ju

24、risdictional and societal aspects of implementation of biometric technologies Pictograms, icons and symbols for use with biometric systems Part 9: Vascular applications1 ScopeThis part of ISO/IEC 24779 specifies the symbols and icons to be used in conjunction with vascular image recognition.This Int

25、ernational Standard specifies a family of symbols and icons used in association with devices for biometric enrolment, verification, and/or identification. Icons are for display on visual display screens. Symbols are printed on signs and printed documents including user documents, hand outs, training

26、 material, installation/maintenance manuals, and on case or key tops and buttons of devices.The symbols and icons are intended to show the modality of biometrics and to advise the necessity of appropriate preparation and the behaviour required in order to use the biometric systems. This Internationa

27、l Standard focuses on communication with the data capture subject. Operators could use this International Standard but they might need additional symbols and information2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensab

28、le for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO/IEC 247791, Information technology Cross-jurisdictional and societal aspects of implementation of biometric techn

29、ologies Pictograms, icons and symbols for use with biometric systems Part 1: General principlesISO/IEC 197949, Information technology Biometric data interchange formats Part 9: Vascular image data3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO/IEC 247

30、791 and ISO/IEC 197949 apply.4 Symbols and icons of vascular image recognitionVascular image recognition technology observe features that are not only inside the body but also hard to see by the human eye. Current commercial products typically use the following three parts of body for vascular image

31、 recognition.The symbol specified in 5.1 generally indicates vascular image recognition. Symbols and icons that are designed for indicating specific guidance on use of the system can be provided by vendor.INTERNATIONAL STANDARD ISO/IEC 24779-9:2015(E) ISO/IEC 2015 All rights reserved 1BS ISO/IEC 247

32、79-9:2015ISO/IEC 24779-9:2015(E)The symbols with body-parts, hand and finger, specified in 5.2.1 and 5.2.2 indicate vascular image recognition with body-parts.Symbols and icons that should show the relation to vascular image recognition shall contain the symbol specified 5.1.5 Symbols for use with v

33、ascular image recognition5.1 Generic symbol (vascular)Symbol No IEC 60417-6260 modifiedSymbol ID ISO/IEC 24779-9.1Name Vascular image recognition, generalDescription To identify the modality of the biometrics (Vascular)Notes a) This symbol can represent all the vascular image recog-nition system.b)

34、This symbol is intended to be used with the supplementary symbol to identify the part of body to be used for recognition.c) This symbol should not be rotated.Geometric form One long straight line with five bent lines and ending with the shape of heart.Keywords BiometricsVascularIdentificationRecogni

35、tion5.2 Symbols with body-parts5.2.1 HandSymbol No IEC 60417-6261 modifiedSymbol ID ISO/IEC 24779-9.2Name Vascular image recognition, hand2 ISO/IEC 2015 All rights reservedBS ISO/IEC 24779-9:2015ISO/IEC 24779-9:2015(E)Description To identify that the biometric trait for vascular will be taken from t

36、he handNotes a) This symbol is intended to identify Hand vascular image recognitionb) This symbol should not be rotated.Geometric form One long straight line with five bent lines and ending with the shape of heart .One line outlines the shape of a hand .Keywords BiometricsVascularIdentificationRecog

37、nition5.2.2 FingerSymbol No IEC 60417-6262 modifiedSymbol ID ISO/IEC 24779-9.3Name Vascular image recognition, fingerDescription To identify that the biometric trait for vascular will be taken from the fingerNotes a) This symbol is intended to identify Finger vascular image recognition.b) This symbo

38、l should not be rotated.c) Specific guidance on use of the system to be provided by vender.Geometric form One long straight line with five bent lines and ending with the shape of heart.One line outlines the shape of a finger and one line outlines the shape of a nail.Keywords BiometricsVascularIdenti

39、ficationRecognition ISO/IEC 2015 All rights reserved 3BS ISO/IEC 24779-9:2015ISO/IEC 24779-9:2015(E)Annex A (informative) MethodologyA.1 GeneralIt is difficult to make individuals imagine the symbols and icons that are relating to vascular image recognition because vascular image used for the vascul

40、ar image recognition is not easily noticeable in the social life.Therefore, specific attention was given to the subjects need to have an intuitive understanding of the meaning of this symbol.A.2 DesignSymbols specified in this part of ISO/IEC 24779 were developed in accordance with ISO/IEC 80416 whi

41、ch sets the common requirements for creation of graphical symbols.The symbol was designed to avoid any confusion with other graphical symbols, specifically the USB symbol, and with indications of diseases such as varicose veins and spider veins.A.3 TestingBasically, testing was done in accordance wi

42、th ISO 9186.However, since vascular is hard to see, the current comprehension test for symbols and icons is not effective for the development of vascular image recognition.In the comprehension test, in order to understand what kind of graphical symbol was appropriate, additionally, the following thr

43、ee issues were considered:a) whether the symbol was understandable as “vascular image recognition”;b) whether the symbol appropriately indicated “vascular image recognition”;c) whether the symbol did not evoke uncomfortableness.4 ISO/IEC 2015 All rights reservedBS ISO/IEC 24779-9:2015ISO/IEC 24779-9

44、:2015(E)Bibliography1 ISO 7000, Graphical symbols for use on equipment1)2 IEC 60417, Graphical symbols for use on equipment3 ISO 7001, Graphical symbols Public information symbols4 ISO 7239, Development and principles for application of public information symbols5 ISO 80416-2, Basic principles for g

45、raphical symbols for use on equipment Part 2: Form and use of arrows6 ISO 804164, Basic principles for graphical symbols for use on equipment Part 4: Guidelines for the adaptation of graphical symbols for use on screens and displays (icons)7 ISO 91861, Graphical symbols Test methods Part 1: Methods

46、for testing comprehensibility8 ISO 91862, Graphical symbols Test methods Part 2: Method for testing perceptual quality9 ISO/IEC 115811, Information technology User system interfaces and symbols Icon symbols and functions Part 1: Icons General10 ISO/IEC 115812, Information technology User system inte

47、rfaces and symbols Icon symbols and functions Part 2: Object icons11 ISO/IEC 115813, Information technology User system interfaces and symbols Icon symbols and functions Part 3: Pointer icons12 ISO/IEC 115815, Information technology User system interfaces and symbols Icon symbols and functions Part

48、5: Tool icons13 ISO/IEC 115816, Information technology User system interfaces and symbols Icon symbols and functions Part 6: Action icons14 ISO/IEC 13251, Collection of graphical symbols for office equipment15 ISO/IEC 18035, Information technology Icon symbols and functions for controlling multimedi

49、a software applications16 ISO/IEC/TR 19765, Information technology Survey of icons and symbols that provide access to functions and facilities to improve the use of information technology products by the elderly and persons with disabilities.17 IEC 80416-1, Basic principles for graphical symbols for use on equipment Part 1: Creation of graphical symbols for registration18 IEC 80416-3, Basic principles for graph