BS ISO IEC 24730-1-2014 Information technology Real-time locating systems (RTLS) Application programming interface (API)《信息技术 实时定位系统(RTLS) 应用编程接口(API)》.pdf

《BS ISO IEC 24730-1-2014 Information technology Real-time locating systems (RTLS) Application programming interface (API)《信息技术 实时定位系统(RTLS) 应用编程接口(API)》.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 24730-1-2014 Information technology Real-time locating systems (RTLS) Application programming interface (API)《信息技术 实时定位系统(RTLS) 应用编程接口(API)》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS ISO/IEC 24730-1:2014Information technology Real-time locating systems(RTLS)Part 1: Application programming interface(API)Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitte

2、d without license from IHS-,-,-BS ISO/IEC 24730-1:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO/IEC24730-1:2014. It supersedes BS ISO/IEC 24730-1:2006 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee IST/34, A

3、utomatic identification and data capturetechniques.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British St

4、andards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 79172 7ICS 35.040Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2014.Am

5、endments issued since publicationDate Text affectedCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO/IEC 24730-1:2014Information technology Real-time locating sy

6、stems (RTLS) Part 1: Application programming interface (API)Technologies de linformation Systmes de localisation en temps rel (RTLS) Partie 1: Interface de programmation dapplication (API) ISO/IEC 2014INTERNATIONAL STANDARDISO/IEC24730-1Second edition2014-02-15Reference numberISO/IEC 24730-1:2014(E)

7、Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO/IEC 24730-1:2014ISO/IEC 24730-1:2014(E)ii ISO/IEC 2014 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO/IEC

8、2014All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be reque

9、sted from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandCopyright British Standards Institution Provided

10、 by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO/IEC 24730-1:2014ISO/IEC 24730-1:2014(E) ISO/IEC 2014 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms an

11、d definitions . 14 Symbols and abbreviated terms . 25 The service 25.1 Purpose 25.2 Specification summary . 35.3 Message stream configuration 45.4 Security 45.5 Purpose 45.6 Language independence . 45.7 Architecture . 45.8 SLMP messages . 45.9 Simple Location Message Format over HTTP 13Bibliography

12、.17Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO/IEC 24730-1:2014ISO/IEC 24730-1:2014(E)ForewordISO (the International Organization for Standardization) and

13、IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with

14、 particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have

15、 established a joint technical committee, ISO/IEC JTC 1.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint te

16、chnical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO

17、shall not be held responsible for identifying any or all such patent rights.ISO/IEC 24730-1 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques.This second edition cancels and replaces the first edi

18、tion (ISO/IEC 24730-1:2006), which has been technically revised.ISO/IEC 24730 consists of the following parts, under the general title Information technology Real time locating systems (RTLS): Part 1: Application programming interface (API) Part 2: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air

19、interface protocol Part 21: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with a single spread code and employing a DBPSK data encoding and BPSK spreading scheme Part 22: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitte

20、rs operating with multiple spread codes and employing a QPSK data encoding and Walsh offset QPSK (WOQPSK) spreading scheme Part 5: Chirp spread spectrum (CSS) at 2,4 GHz air interface Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface Part 62: High rate pulse repetition

21、 frequency Ultra Wide Band (UWB) air interfaceiv ISO/IEC 2014 All rights reservedCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO/IEC 24730-1:2014ISO/IEC 24730-

22、1:2014(E)IntroductionISO/IEC 24730 defines several air interface protocols and a single Application Programming Interface (API) for Real Time Locating Systems (RTLS) for use in asset management and is intended to allow for compatibility and to encourage interoperability of products for the growing R

23、TLS market.This part of ISO/IEC 24730, the RTLS Application Programming Interface, establishes a technical standard for Real Time Locating Systems. To be fully compliant with ISO/IEC 24730, Real Time Locating Systems (RTLS) shall comply with this part of ISO/IEC 24730 and at least one air interface

24、protocol defined in ISO/IEC 24730.Real Time Locating Systems are wireless systems with the ability to locate the position of an item anywhere in a defined space (local/campus, wide area/regional, global) at a point in time that is, or is close to, real time. Position is derived by measurements of th

25、e physical properties of the radio link.Conceptually there are four classifications of RTLS: Locating an asset via satellite - requires line-of-sight - accuracy to 10 meters Locating an asset in a controlled area, e.g., warehouse, campus, airport - area of interest is instrumented - accuracy to 3 me

26、ters Locating an asset in a more confined area - area of interest is instrumented - accuracy to tens of centimetres Locating an asset over a terrestrial area using terrestrial mounted receivers over a wide area, cell phone towers for example accuracy 200 metersWith a further two methods of locating

27、an object which are really RFID rather than RTLS: Locating an asset by virtue of the fact that the asset has passed point A at a certain time and has not passed point B Locating an asset by virtue of providing a homing signal whereby a person with a handheld can find an assetMethod of location is th

28、rough identification and location, generally through multi-lateration, of various types Time of Flight Ranging Systems Amplitude Triangulation Time Difference of Arrival (TDOA) Cellular Triangulation Satellite Multi-lateration Angle of ArrivalThe location information of an asset may further be enhan

29、ced with information on its spatial orientation.This part of ISO/IEC 24730 defines an application programming interface (API) needed for utilizing an RTLS system.An API is a boundary across which application software uses facilities of programming languages to invoke services. These facilities may i

30、nclude procedures or operations, shared data objects and resolution of identifiers. A wide range of services may be required at an API to support applications. Different methods may be appropriate for documenting API specifications for different types of services. ISO/IEC 2014 All rights reserved vC

31、opyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO/IEC 24730-1:2014ISO/IEC 24730-1:2014(E)The information flow across the API boundary is defined by the syntax and

32、 semantics of a particular programming language, such that the user of that language may access the services provided by the application platform on the other side of the boundary. This implies the specification of a mapping of the functions being made available by the application platform into the

33、syntax and semantics of the programming language. An API specification documents a service and/or service access method that is available at an interface between the application and an application platform.This API describes the RTLS service and its access methods, to enable client applications to i

34、nterface with the RTLS system. This RTLS service is the minimum service that shall be provided by a RTLS system to be API compatible with this standard.This part of ISO/IEC 24730 uses a “full stop” as the decimal point separator since an API file is being created with an output in a .csv file format

35、 which uses the comma to separate values.vi ISO/IEC 2014 All rights reservedCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO/IEC 24730-1:2014INTERNATIONAL STAND

36、ARD ISO/IEC 24730-1:2014(E)Information technology Real-time locating systems (RTLS) Part 1: Application programming interface (API)1 ScopeThis part of ISO/IEC 24730 enables software applications to utilize an RTLS infrastructure to locate assets with RTLS transmitters attached to them. It defines a

37、boundary across which application software uses facilities of programming languages to collect information contained in RTLS tag blinks received by the RTLS infrastructure.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispen

38、sable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO/IEC 15963, Information technology Radio frequency identification for item management Unique identification for

39、 RF tagsISO/IEC 19762 (all parts), Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabularyIEEE Guidelines for use of a 48-bit Extended Unique Identifier (EUI-48)IEEE Guidelines for 64-bit Global Identifier (EUI-64) Registration AuthorityExtensible Mar

40、kup Language (XML) 1.0, (Third Edition), W3C Recommendation, World Wide Web Consortium (W3C), 4 February 20041)SOAP Version 1.2 Part 1: Messaging Framework (Second Edition), W3C Recommendation, World Wide Web Consortium (W3C), 27 April 20072)3 Terms and definitionsFor the purposes of this document,

41、the terms and definitions given in ISO/IEC 19762 (all parts), and the following apply3.1fieldelement of a data record in which information is stored, which may contain one or more properties of a tag blink3.2XML tagmarker that qualifies content in a XML document1) http:/www.w3.org/TR/REC-xml/2) http

42、:/www.w3.org/TR/2007/REC-soap12-part1-20070427/ ISO/IEC 2014 All rights reserved 1Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS ISO/IEC 24730-1:2014ISO/IEC 24730

43、-1:2014(E)3.3persistent connectionnetwork connection between a server and a client that is kept open for several application level message exchanges, or request call, even after sending application level error responses3.4tag statusmandatory fields within a Locate message not including the and field

44、s4 Symbols and abbreviated termsFor the purposes of this document, the symbols and abbreviated terms given in ISO/IEC 19762 (all parts) and the following apply.API Application Programming InterfaceASCII American Standard Code for Information InterchangeCR ASCII Carriage ReturnEUI Extended Unique Ide

45、ntifierJMS Java Messaging ServiceHTTP HyperText Transfer ProtocolHTTPS HTTP Secure ProtocolLF ASCII Line FeedOUI Organizationally Unique IdentifierREST Representational State TransferRTLS Real Time Locating SystemS-HTTP Secure HTTP ProtocolSLMF Simple Location Message FormatSLMP Simple Location Mess

46、age ProtocolSOAP Simple Object Access ProtocolSSL Secure Sockets LayerTDOA Time Difference Of ArrivalTCP/IP Transmission Control Protocol / Internet ProtocolXML eXtensible Markup LanguageXSD XML Schema Definition5 The service5.1 PurposeThe purpose of the RTLS software API is to provide a simple mini

47、mal interface that facilitates adoption and can be implemented easily on both the RTLS system and the application. The purpose is also to 2 ISO/IEC 2014 All rights reservedCopyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction

48、 or networking permitted without license from IHS-,-,-BS ISO/IEC 24730-1:2014ISO/IEC 24730-1:2014(E)allow fast transfer of messages to any client that connects to the RTLS system. In addition, the message flow should be human-readable and easy to interpret.The API is to be supported by a device of minimal functionality, which is a collection and forwarding device, with no persistency or database required.The device can provide rate filtering and location smoothing capabilities, but these functions are not required by the