BS ISO IEC 11560-1993 Information technology - Information interchange on 130 mm optical disk cartridges using the magneto-optical effect for write once read multiple functionality.pdf

《BS ISO IEC 11560-1993 Information technology - Information interchange on 130 mm optical disk cartridges using the magneto-optical effect for write once read multiple functionality.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 11560-1993 Information technology - Information interchange on 130 mm optical disk cartridges using the magneto-optical effect for write once read multiple functionality.pdf（84页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO/IEC 11560:1992 Implementation of ISO/IEC 11560:1992 Information technology Information interchange on 130 mm optical disk cartridges using the magneto- optical effect, for write once, read multiple functionalityBS ISO/IEC11560:1992 This British Standard, having been prepared

2、under the directionof the Information Systems Technology Standards Policy Committee, was publishedunderthe authority ofthe Standards Board and comes into effect on 15April1993 BSI 02-2000 The following BSI references relate to the work on this standard: Committee reference IST/4 Draft for comment 91

3、/66331 DC ISBN 0 580 22081 8 Committees responsible for this BritishStandard The preparation of this British Standard was entrusted by the Information Systems Technology Standards Policy Committee (IST/-) to Technical Committee IST/4, upon which the following bodies were represented: British Compute

4、r Society ICI Imagedata Institution of Electrical Engineers International Computers Limited Kodak Limited Amendments issued since publication Amd. No. Date CommentsBSISO/IEC11560:1992 BSI 02-2000 i Contents Page Committees responsible Inside front cover National foreword ii Foreword vii Text of ISO/

5、IEC 11560 1BS ISO/IEC11560:1992 ii BSI 02-2000 National foreword This British Standard reproduces verbatim ISO/IEC 11560:1992 and implements it as the UK national standard. This British Standard is published under the direction of the Information Systems Technology Standards Policy Committee whose T

6、echnical Committee IST/4 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgat

7、e them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from BSI Sales Department, BSI, Linford Wood, Milton Keynes, MK14 6LE. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are re

8、sponsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theISO/IEC title page, pagesii toviii, pages1 to71 and a back cover. Thi

9、s standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.ISO/IEC11560:1992(E) ii BSI 02-2000 Contents Page Foreword vii Introduction 1 1 Scope 1 2 Conformance 1 3 Normative references 1 4 Defini

10、tions 1 4.1 case 1 4.2 clamping zone 1 4.3 control track 1 4.4 cyclic redundancy check (CRC) 1 4.5 defect management 2 4.6 disk reference plane 2 4.7 entrance surface 2 4.8 error correction code (ECC) 2 4.9 format 2 4.10 hub 2 4.11 interleaving 2 4.12 Kerr rotation 2 4.13 land and groove 2 4.14 mark

11、 2 4.15 optical disk 2 4.16 optical disk cartridge (ODC) 2 4.17 polarization 3 4.18 pre-recorded mark 3 4.19 read power 3 4.20 recording layer 3 4.21 Reed-Solomon code 3 4.22 spindle 3 4.23 substrate 3 4.24 track 3 4.25 track pitch 3 4.26 write-inhibit hole 3 4.27 write once optical disk 3 5 Convent

12、ions and notations 4 5.1 Representation of numbers 4 5.2 Names 4 6 List of acronyms 4 7 General description of the optical disk cartridge 5 8 General requirements 5 8.1 Environments 5 8.1.1 Testing environment 5 8.1.2 Operating environment 5 8.1.3 Storage environment 5 8.1.4 Transportation 6 9 Safet

13、y requirements 6 10 Dimensional and mechanical characteristics of the case 6 10.1 General description of the case 6 10.2 Case drawings 6 10.3 Sides, references axes and reference planes 7 10.3.1 Relationship of Sides A and B 7ISO/IEC11560:1992(E) BSI 02-2000 iii Page 10.3.2 Reference axes and case r

14、eference planes 7 10.4 Materials 7 10.5 Mass 7 10.6 Overall dimensions 7 10.7 Location hole 8 10.8 Alignment hole 8 10.9 Surfaces on reference planes P 8 10.10 Insertion slots and detent features 9 10.11 Gripper slots 9 10.12 Write-inhibit holes 10 10.13 Media sensor holes 10 10.14 Head and motor wi

15、ndow 11 10.15 Shutter 11 10.16 Slot for shutter opener 11 10.17 Shutter sensor notch 12 10.18 User label areas 12 11 Dimensional and physical characteristics of the disk 12 11.1 Dimensions of the disk 12 11.1.1 Outer diameter 12 11.1.2 Thickness 12 11.1.3 Clamping zone 12 11.1.4 Clearance zone 12 11

16、.2 Mass 13 11.3 Moment of inertia 13 11.4 Imbalance 13 11.5 Axial deflection 13 11.6 Axial acceleration 13 11.7 Dynamic radial runout 13 11.8 Radial Acceleration 13 11.9 Tilt 13 12 Drop test 13 13 Interface between disk and drive 13 13.1 Clamping technique 13 13.2 Dimensions of the hub 13 13.2.1 Out

17、er diameter of the hub 13 13.2.2 Height of the hub 14 13.2.3 Diameter of the centre hole 14 13.2.4 Height of the top of the centre hole at diameter D 9 14 13.2.5 Centring length at diameter D 9 14 13.2.6 Chamfer at diameter D 9 14 13.2.7 Chamfer at diameter D 8 14 13.2.8 Outer diameter of the magnet

18、izable ring 14 13.2.9 Inner diameter of the magnetizable ring 14 13.2.10 Thickness of the magnetizable material 14 13.2.11 Position of the top of the magnetizable ring relative to the disk reference plane 14 13.3 Magnetizable material 14 13.4 Clamping force 14ISO/IEC11560:1992(E) iv BSI 02-2000 Page

19、 13.5 Capture cylinder for the hub 15 13.6 Disk position in the operating condition 15 14 Characteristics of the substrate 30 14.1 Index of refraction 30 14.2 Thickness 30 15 Characteristics of the recording layer 30 15.1 Test conditions 30 15.1.1 General 30 15.1.2 Read conditions 30 15.1.3 Write co

20、nditions 31 15.1.4 Erase conditions 31 15.2 Baseline reflectance 32 15.2.1 General 32 15.2.2 Actual value 32 15.2.3 Requirement 32 15.3 Magneto-optical recording in the User Zone 32 15.3.1 Resolution 32 15.3.2 Imbalance of magneto-optical signal 32 15.3.3 Figure of merit for magneto-optical signal 3

21、2 15.3.4 Narrow-band signal-to-noise ratio 33 15.3.5 Cross-talk ratio 33 15.3.6 Ease of erasure 33 16 Disk format 34 16.1 Track geometry 34 16.1.1 Track shape 34 16.1.2 Direction of rotation 34 16.1.3 Track pitch 34 16.1.4 Track number 34 16.2 Formatted Zone 34 16.3 Control Tracks 35 16.4 Control tr

22、ack PEP Zone 35 16.4.1 Recording in the PEP Zone 35 16.4.2 Cross-track loss 36 16.4.3 Format of the tracks of the PEP Zone 36 16.5 Control Track SFP Zones 39 16.5.1 Duplicate of the PEP information 40 16.5.2 Media information 40 16.5.3 System information 45 16.5.4 Unspecified content 46 16.6 Require

23、ments for interchange of a User-Recorded cartridge 46 16.6.1 Requirements for reading 46 16.6.2 Requirements for writing and erasing 46 17 Track format 46 17.1 Track layout 46 17.1.1 Tracking 46 17.1.2 Characteristics of pre-recorded information 47 17.2 Sector format 49 17.2.1 Sector Mark (SM) 50ISO

24、/IEC11560:1992(E) BSI 02-2000 v Page 17.2.2 VFO areas 51 17.2.3 Address Mark (AM) 51 17.2.4 ID and CRC 51 17.2.5 Postamble (PA) 51 17.2.6 Offset Detection Field (ODF) 51 17.2.7 Gap 51 17.2.8 Flag 51 17.2.9 Auto Laser Power Control (ALPC) 52 17.2.10 Sync 52 17.2.11 Data field 52 17.2.12 Buffer 52 17.

25、3 Recording code 52 17.4 Defect management 53 17.4.1 Media initialization 53 17.4.2 Write and read procedure 54 17.4.3 Layout of the User Zone 54 17.4.4 Summary of the location of the zones on the disk 59 Annex A (normative) Optical system for measuring write, read and erase characteristics 60 Annex

26、 B (normative) Definition of write and erase pulse width 62 Annex C (normative) Measurement of figure of merit 62 Annex D (informative) Values to be implemented in existing and future standards 63 Annex E (informative) Guidelines for the use of ODCs 64 Annex F (normative) CRC for ID fields 64 Annex

27、G (normative) Interleave, CRC, ECC, Resync for the Data field 64 Annex H (informative) Sector retirement guidelines 70 Annex J (informative) Office environment 70 Annex K (informative) Transportation 70 Annex L (normative) Requirements for interchange 70 Figure 1 Hub dimensions 16 Figure 2 Case 17 F

28、igure 3 Overall dimensions and reference axes 18 Figure 4 Surfaces S1, S2, S3 and S4 of the reference plane P 19 Figure 4a Detail of surface S3 20 Figure 5 Insertion slot and detent 21 Figure 6 Gripper slots 22 Figure 7 Write-inhibit holes 23 Figure 8 Media sensor holes 24 Figure 9 Shutter sensor no

29、tch viewed from Side A 25 Figure 10 Head and motor window 26 Figure 11 Shutter opening feature 27 Figure 12 Capture cylinder for the hub 28 Figure 13 User label area 29 Figure 14 Definition of I Land I H 32 Figure 15 Amplitude versus frequency for the magneto-optical signal 33 Figure 16 Example of p

30、hase-encoded modulation in the PEP Zone 36ISO/IEC11560:1992(E) vi BSI 02-2000 Page Figure 17 Path of the laser beam when crossing tracks and the resulting PEP signals 36 Figure 18 Track format in the PEP Zone 37 Figure 19 Sector format in the PEP Zone 37 Figure 20 Example of a sector with Offset Det

31、ection Field for on-land recording (schematic) 46 Figure 21 Illustration of the various parameters for read characteristics 48 Figure 22 Sector format for 1 024 user byte 49 Figure 23 Sector format for 512 user bytes 50 Figure 24 Sector Mark pattern 50 Figure 25 Sector assignment of the DMAs for the

32、 1 024-byte format 55 Figure 26 Sector assignment of the DMAs for the 512-byte format 55 Figure 27 Location of the defined zones 59 Figure A.1 Measuring set-up for write, read and erase characteristics 61 Figure B.1 Definition of the pulse shape 62 Figure G.1 Data field configuration, 1 024-byte sec

33、tors, ECC with 10-way interleave 68 Figure G.2 Data field configuration, 512-byte sectors, ECC with 5-way interleave 69 Table 1 Format of the Data field of a sector of the PEP Zone 39 Table 2 Summary of media information 45 Table 3 Conversion of input bits to channel bits 53 Table 4 Byte assignment

34、of the Disk Definition Sector 56 Table 5 Primary Defect List 57 Table 6 Secondary Defect List 58ISO/IEC11560:1992(E) BSI 02-2000 vii Foreword ISO (the International Organization for Standardization) and IEC (theInternational Electrotechnical Commission) form the specialized system for worldwide stan

35、dardization. National bodies that are members of ISOorIEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO andIEC technical committees collaborate in fields of m

36、utual interest. Other International Organizations, governmental and non-governmental, in liaison with ISOandIEC, also take part in the work. In the field of information technology, ISOandIEC have established a joint technical committee, ISO/IECJTC1. Draft International Standards adopted by the joint

37、 technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least75% of the national bodies casting a vote. International Standard ISO/IEC11560 was prepared by the European Computer Manufacturers Association (as Standard ECMA-15

38、3) and was adopted, under a special “fast-track procedure”, by Joint Technical Committee ISO/IEC JTC1, Information technology, in parallel with its approval by national bodies of ISOandIEC. Annex A, Annex B, Annex C, Annex F, Annex G and Annex L form an integral part of this International Standard.

39、Annex D, Annex E, Annex H, Annex J and Annex K are for information only. Patents During the preparation of the ECMA standard, information was gathered on patents upon which application of the standard might depend. Relevant patterns were identified as belonging to Hewlett-Packard Company. However, n

40、either ECMA nor ISO/IEC can give authoritative or comprehensive information about evidence, validity or scope of patent and like rights. The patent holder has stated that licences will be granted under reasonable and non-discriminatory terms. Communications on this subject should be addressed to Hew

41、lett-Packard Company Greeley Division 70071st Avenue Greeley Colorado 80634 3033504000 USAviii blankISO/IEC11560:1992(E) BSI 02-2000 1 Introduction This International Standard specifies the characteristics of 130mm optical disk cartridges (ODC) which provide for the disk to be initialized once, and

42、the information to be written once only and read many times, using the magneto-optical effect. This International Standard together with a standard for volume and file structure provides for full data interchange between data processing systems. 1 Scope This International Standard specifies definiti

43、ons of the essential concepts; the environment in which the characteristics are to be tested; the environments in which the cartridge are to be operated and stored; the mechanical, physical and dimensional characteristics of the case and of the optical disk; the magneto-optical characteristics and t

44、he recording characteristics for initializing the disk once, for recording the information once, for reading it many times, so as to provide physical interchangeability between data processing systems; the format for the physical disposition of the tracks and sectors, the error correction codes, the

45、 modulation method used for recording and the quality of the recorded signals. 2 Conformance A130mm optical disk cartridge is in conformance with this International Standard if it meets all the mandatory requirements specified herein. 3 Normative references The following standards contain provisions

46、 which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibili

47、ty of applying the most recent edition of the standards listed below. Members of IECandISO maintain registers of currently valid International Standards. ISO 683-13:1986, Heat treatable steels, alloy steels and free-cutting steels Wrought stainless steels. ISO/IEC 9171-1:1990, Information technology

48、 130 mm optical disk cartridge, write once, for information interchange Part 1: Unrecorded optical disk cartridge. IEC 950:1986, Safety of information technology equipment including electrical business equipment. 4 Definitions For the purposes of this International Standard, the following definition

49、s apply. 4.1 case the housing for an optical disk, that protects the disk and facilitates disk interchange 4.2 clamping zone the annular part of the disk within which the clamping force is applied by the clamping device 4.3 control track a track containing the information on media parameters and format necessary for writing, reading and erasing the remaining tracks on the optical disk 4.4 cyclic redundancy check (CRC) a method for detecting errors in dataISO/IEC11560:1992(E