BS ISO 8007-3-2005 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Sidewall blocks《铝生产用碳素材料 单个材料的取样方案和取样 侧壁块》.pdf

《BS ISO 8007-3-2005 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Sidewall blocks《铝生产用碳素材料 单个材料的取样方案和取样 侧壁块》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 8007-3-2005 Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Sidewall blocks《铝生产用碳素材料 单个材料的取样方案和取样 侧壁块》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 8007-3:2003 Carbonaceous materials used in the production of aluminium Sampling plans and sampling from individual units Part 3: Sidewall blocks ICS 71.100.10 BS ISO 8007-3:2003 This British Standard was published under the authority of the Standards Policy and Strategy Commi

2、ttee on 30 March 2005 BSI 30 March 2005 ISBN 0 580 45703 6 National foreword This British Standard reproduces verbatim ISO 8007-3:2003 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee CII/24, Raw materials for the aluminium i

3、ndustry, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the sect

4、ion entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. C

5、ompliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor rel

6、ated international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 3 and a back cover. The BSI copyright notice displayed in this document indicates when the documen

7、t was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 8007-3:2003(E) OSI 3002INTERNATIONAL STANDARD ISO 8007-3 First edition 2003-10-15 Carbonaceous materials used in the production of aluminium Sampling plans and sampling from individual units Part 3: Si

8、dewall blocks Produits carbons utiliss pour la production de laluminium Plans dchantillonnage et chantillonnage pour units individuelles Partie 3: Blocs latraux BSISO80073:2003IS-7008 O3:(3002E) DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfepcaes. In ccaocnadrw eith Aebods licensilop gnic,y

9、this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh computfrep reormign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infriigngn Aebods licensilop gnic.y ehT ISO tneClar Secr

10、teiraat caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo crtaee this PDF file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion marapterew setpo erimizde for irpnti.gn Evyre caer neeb sah taken to sn

11、eeru that the file is suitlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform ttneC ehlar Secrteiraat ta the serddaig sleb nevwo. ISO 3002 All irthgs erse.devr lnUeto sswrehise specified, on trap fo this lbupictaion maeb y cudorperro de tuil

12、izi den yna form ro na ybm ynae,s lecetrinoc ro mecinahcal, inclidung tohpcoiypodna gn micrfoilm, wittuoh repmissii non writign from ietI rehSa Ot tsserdda eh ebolw or ISOs memreb i ydobn the cnuotrfo y ttseuqer ehe.r ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xa

13、F0 947 22 14 + 9 74 E-mail coirypthgiso.o gr We bwww.is.o gro Pulbisdehi n Switlrez dnaii ISO 3002 Allr ihgtsser edevrBSISO80073:2003IS-7008 O3:(3002E) I SO 3002 All irhgts seredevr iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards b

14、odies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizati

15、ons, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the

16、 ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of t

17、he member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 8007-3 was prepared by Technical Committee ISO/TC 47, Chemistry,

18、 Subcommittee SC 7, Aluminium oxide, cryolite, aluminium fluoride, sodium fluoride, carbonaceous products for the aluminium industry. ISO 8007 consists of the following parts, under the general title Carbonaceous materials used in the production of aluminium Sampling plans and sampling from individu

19、al units: Part 1: Cathode blocks Part 2: Prebaked anodes Part 3: Sidewall blocks BSISO80073:2003IS-7008 O3:(3002E) iv I SO 3002 All irhgts seredevrIntroduction Details of the sampling of shaped refractory products in general are given in ISO 5022, which details the statistical basis for sampling pla

20、ns for acceptance testing of a consignment or lot. Sidewall blocks used in the production of aluminium have specific requirements for sampling and, while the statistical basis for sampling given in ISO 5022 can be applied, further or modified requirements apply. ISO 3951 describes sampling plans for

21、 inspection by acceptance quality limit (AQL). ISO 2859-0 and ISO 2859-1 describe sampling plans for inspection by attributes. BSISO80073:2003INTENRATIONAL TSANDADR IS-7008 O3:(3002E)I SO 3002 All irhgts seredevr 1Carbonaceous materials used in the production of aluminium Sampling plans and sampling

22、 from individual units Part 3: Sidewall blocks 1 Scope This part of ISO 8007 describes procedures for sampling consignments of blocks and taking test samples from single sidewall blocks used in the production of aluminium. 2 Normative references The following referenced documents are indispensable f

23、or the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2859-0, Sampling procedures for inspection by attributes Part 0: Introduction to the ISO 2859 attri

24、bute sampling system ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection ISO 3951, Sampling procedures and charts for inspection by variables for percent nonconforming ISO 5022, Shaped refractory pr

25、oducts Sampling and acceptance testing ISO 6206, Chemical products for industrial use Sampling Vocabulary 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 2859-0, ISO 2859-1, ISO 3951, ISO 5022 and ISO 6206 apply. 4 Apparatus Suitable cutting equipmen

26、t, having cutting edges preferably coated with diamond or other extremely hard material. BSISO80073:2003IS-7008 O3:(3002E) 2 I SO 3002 All irhgts seredevr5 Sampling from single sidewall blocks 5.1 General Single sidewall blocks shall be sampled in accordance with the provisions of ISO 5022 or ISO 28

27、59-1, with the additional requirements given in 5.2 and 5.3 and Clauses 6 to 8. Sidewall blocks are usually unsuitable for their original purpose after samples have been taken. The sampling plan shall recognize that the block may have to be declared scrap if it cannot be reworked for a different pur

28、pose. 5.2 Sampling The sampling positions shall take into consideration the size and shape of different sidewall blocks. It is strongly recommended that an agreement be made between the supplier and the user concerning sampling locations. Samples shall, wherever practicable, be taken parallel and pe

29、rpendicular to the major axis of the block. Manufacturers of sidewall blocks, formed by extrusion or vibration, have knowledge of the predominant grain direction for which it is recommended to take samples in parallel and perpendicular directions. Manufacturers are recommended to inform users of the

30、 predominant grain direction where appropriate. Users are recommended to request this information from manufacturers or suppliers. If the predominant grain direction is not known then, samples shall be taken in orthogonal x, y and z directions. A sketch of the positions and direction of sampling sha

31、ll be included in the sampling report see 8 e). 6 Dimensions of the sample(s) The dimensions of the sample(s) shall be chosen according to the tests to be carried out. The minimum dimension (usually the diameter) shall be three times the maximum particle size of the dry aggregate, where this is know

32、n. Reference shall be made to the International Standards relating to the test(s) to be carried out to ensure that the sample(s) taken from the sidewall block are of suitable dimensions. The samples taken from the sidewall block may already be of the correct dimensions. If not, then the dimensions o

33、f the core-drilled sample(s) shall also allow for the provision of parallel sides when the finished test piece is prepared. The cross-section of the finished test sample(s) taken from the sidewall block shall be circular. The dimensions of the test sample(s) shall be given in the sampling report see

34、 8 f). The specific dimensions of the piece(s) to be tested are normally given in the appropriate International Standard. Where the International Standard does not specify the dimensions of the test piece(s), a diameter of 30 mm or 50 mm is recommended for practical purposes. The length of the test

35、piece should be at least 1,5 times the diameter. 7 Procedure The sample is to be taken by core drilling or by sawing from suitable locations and in directions parallel and perpendicular to the predominant grain direction, if known. Sampling in the x, y and z directions is strongly recommended. BSISO

36、80073:2003IS-7008 O3:(3002E) I SO 3002 All irhgts seredevr 38 Sampling report The sampling report shall include the following: a) names of producer and customer; b) number and reference marking of the batch(es); c) reference to this part of ISO 8007, i.e. ISO 8007-3; d) date and place of sampling; e

37、) sketch showing the location of the sampling points and the directions of sampling; f) dimensions of the test sample(s); g) name(s) and job title(s) of the person(s) carrying out the sampling; h) complete details of the sampling plan operated. BSISO80073:2003BS ISO 8007-3:2003 BSI 389 Chiswick High

38、 Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amend

39、ment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard wo

40、uld inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the la

41、test editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In r

42、esponse to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards thr

43、ough its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members o

44、f BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding onli

45、ne access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the intern

46、ational standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This

47、 does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.