BS ISO 6746-1-2003 Earth-moving machinery - Definitions of dimensions and codes - Base machine《土方机械 尺寸规格和代码的定义 雏形机床》.pdf

《BS ISO 6746-1-2003 Earth-moving machinery - Definitions of dimensions and codes - Base machine《土方机械 尺寸规格和代码的定义 雏形机床》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 6746-1-2003 Earth-moving machinery - Definitions of dimensions and codes - Base machine《土方机械 尺寸规格和代码的定义 雏形机床》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 6746-1:2003 BS 6914-2:2003 Earth-moving machinery Definitions of dimensions and codes Part 1: Base machine ICS 53.100 BS ISO 6746-1:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 May 2003 BSI 28 May 2003 ISBN

2、0 580 41938 X National foreword This British Standard reproduces verbatim ISO 6746-1:2003 and implements it as the UK national standard. It supersedes BS 6914-2:1988 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee B/513, Construction equipment and pla

3、nt, and site safety, to Subcommittee B/513/1, Earth-moving machinery (International), which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international publicatio

4、ns referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessar

5、y provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpre

6、tation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to iv, pages 1 to 18, an inside back

7、 cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Reference number Numro de rfrence ISO 6746-1:2003(E/F) OSI 3002INTERNATIONAL STANDARD NORME INTERNATIONALE ISO 6746-1 Thi

8、rd edition Troisime dition 2003-05-15 Earth-moving machinery Definitions of dimensions and codes Part 1: Base machine Engins de terrassement Dfinitions des dimensions et des codes Partie 1: Engin de base BSISO67461:2003IS-6476 O1:(3002E/)F DPlcsid Fremia ihTs PDF file mya ctnoian emdebt dedyfepcaes.

9、 In ccacnadrow eitA hebods licnesilop gnic,y tihs file mirp eb yatnde iv roweb detu slahl ton ide ebtlnu deess teh typfecaes wihce era hml era deddebicsnede ti dna onstlalde t noeh comuptfrep reromign tide ehtin.g In wodlnidaot gnihs fil,e trapise atpecc tiereht nser ehnopsiiblity fo nto ifnriigngn

10、Aebods licnesilop gnic.y ehT ISO tneClar Secrteirata caceptl on siibality in this .aera Ai ebods a tedarmfo kra Aebod SystemI snctaropro.de teDials fo teh sfotwcudorp erats sut deo crtaee tihs PDF file cna f ebi dnuon tlareneG eh Ifnler oatit evt oeh file; tP ehDc-Frtaeino marapteres wtpo ereimizf d

11、eirp rotni.gn Evc yresah era t neebakt nesne ot erutah teh fili es siutlbaf eosu rI yb eSO memdob rebeis. In tlnu ehikletneve y ttah lborp aem lertait gno it is f,dnuo plsaee ifnrom ttneC ehlar Secterirata ta teh serddaig sleb nevwo. noxE FDPd noitare seroptilibasn srp eLtne ficihP reDtuep F cnotein

12、r sed lopicse c edtcaraser itngrse. fnoCrommtne xua cidnotisno l ediccned eA,ebod cf eihcier tuep ti ermirpmiv uo slauis, mias iod ent sap ter midofi miosn l euqidrotanme ruelpc yote fefte fnb enicid el enuiccnee tuairostna lutilistaic ed nose lopicse te c euqlelesc-i s yionet itsnlalse. sroL t udlc

13、egrahmtne f ec edicih,re les trapies concenres cacpettne f ediat lser asnopibalit sap en ed fneierl erdnse cidnotisno l edicnecd eAebod. S eLcertirata ctnelar l edIScd Olit entuoe sersnopibalit l nem aati.er Atse ebod enu msopd euqrae dAS ebodystemI snctaropro.de seL tdials lertaifs xua iudorpts loi

14、gciles utilisl ruop sa crtaiud no srptne ficihre PDF snot idsinoplbse l snadirbur aeuq lareneG Ifno f udicih;re les arapmted ser crtaiP noDF tno tpo timiss uopl rimerpssino. uoTtl sees mesruse tno tirp ses tnarag ruopir lxelpiottaic ed noe ficihl rap reec somits memserb ed lISO. naDs le cas lbaborp

15、uepo e sivruiardnet lborp numd eutilistaino, vzelliue fni neormre el Secrtairat ctne lar serdalse c ennodied-sssuo. ISO 3002 Athgir lls serevr.de selnUs towrehise specfidei, trap on fo thsi ilbupctanoi may cudorper ebtu ro dezilina ni dey fomr yb ro nam y,snae lecetrinoc m roceinahcla, icnliduntohp

16、gcoiypom dna gnicrfoilm, wittuoh mrepissii non writif gnrmo ietI rehSta O tserdda ehs ebolw or ISOs memi ydob rebn teh ctnuoyr fo ttseuqer eh.re / iorDts ed cudorpertir nossvre. Sfua cserpirtpioid nfftnere, uactrap enuei de cette lbupictaino tuep en tiudorper erte in tuiliss euos leuqeuq fromuq ec e

17、e siot te cua rapnu corp,d lectrinouo euq mcinaeuq, y compirs ltohp acoipoe te les microfilms, sl snaaccdro cirt ed lIS O laserdse ciud uo srpa- comit mmeerb l edISO snad le syap ud med.ruedna ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mia

18、l coirypthgis.o gro We bwww.is.o groii ISO 3002 Allr ithgsr ese/devrTsuoiord tsr sesvrBSISO67461:2003IS-6476 O1:(3002E/)F I SO 3002 All irthgs erse/devrTsuo iordts rsesvr iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO

19、member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern

20、mental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Di

21、rectives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member b

22、odies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 6746-1 was prepared by Technical Committee ISO/TC 127, Earth-moving machine

23、ry, Subcommittee SC 4, Commercial nomenclature, classification and rating. This third edition cancels and replaces the second edition (ISO 6746-1:1987), which has been technically revised. ISO 6746 consists of the following parts, under the general title Earth-moving machinery Definitions of dimensi

24、ons and codes: Part 1: Base machine Part 2: Equipment and attachments BSISO67461:2003IS-6476 O1:(3002E/)F iv I SO 3002 All irthgs erse/devrTsuo iordts rsesvrAvant-propos LISO (Organisation internationale de normalisation) est une fdration mondiale dorganismes nationaux de normalisation (comits membr

25、es de lISO). Llaboration des Normes internationales est en gnral confie aux comits techniques de lISO. Chaque comit membre intress par une tude a le droit de faire partie du comit technique cr cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec lIS

26、O participent galement aux travaux. LISO collabore troitement avec la Commission lectrotechnique internationale (CEI) en ce qui concerne la normalisation lectrotechnique. Les Normes internationales sont rdiges conformment aux rgles donnes dans les Directives ISO/CEI, Partie 2. La tche principale des

27、 comits techniques est dlaborer les Normes internationales. Les projets de Normes internationales adopts par les comits techniques sont soumis aux comits membres pour vote. Leur publication comme Normes internationales requiert lapprobation de 75 % au moins des comits membres votants. Lattention est

28、 appele sur le fait que certains des lments du prsent document peuvent faire lobjet de droits de proprit intellectuelle ou de droits analogues. LISO ne saurait tre tenue pour responsable de ne pas avoir identifi de tels droits de proprit et averti de leur existence. LISO 6746-1 a t labore par le com

29、it technique ISO/TC 172, Engins de terrassement, sous-comit SC 4, Nomenclature commerciale, classification et performances. Cette troisime dition annule et remplace la deuxime dition (ISO 6746-1:1987), qui a fait lobjet dune rvision technique. LISO 6746 comprend les parties suivantes, prsentes sous

30、le titre gnral Engins de terrassement Dfinitions des dimensions et des codes: Partie 1: Engin de base Partie 2: quipements et accessoires BSISO67461:2003NITERNATNOIAL STANDARD ONMRI ENTENRATIONALE IS-6476 O1:(3002E/)FI SO 3002 All irthgs erse/devrTsuo iordts rsesvr 1Earth-moving machinery Definition

31、s of dimensions and codes Part 1: Base machine Engins de terrassement Dfinitions des dimensions et des codes Partie 1: Engin de base 1 Scope 1 Domaine dapplication This part of ISO 6746 defines certain dimensions of earth-moving base-machines as well as the codes identifying those dimensions. At the

32、 same time, it specifies a reference system for defining, and a coding system for identifying, additional, similar di- mensions in terminology standards and commercial specifications. It is applicable to the basic types of earth-moving machinery as defined in ISO 6165. La prsente partie de lISO 6746

33、 dfinit certaines dimensions des engins de base quipant les engins de terrassement, et les codes qui identifient ces di- mensions. Elle spcifie galement un systme de rfrence pour dfinir dautres dimensions similai- res dans les normes terminologiques et dans les spcifications commerciales, et un syst

34、me de co- dage pour identifier ces dimensions. Elle est applicable aux principaux types dengins de terrassement tels quils sont dfinis dans lISO 6165. 2 Normative references 2 Rfrences normatives The following referenced documents are indispens- able for the application of this document. For dated r

35、eferences, only the edition cited applies. For un- dated references, the latest edition of the refer- enced document (including any amendments) applies. ISO 6165, Earth-moving machinery Basic types Vocabulary Les documents de rfrence suivants sont indis- pensables pour lapplication du prsent documen

36、t. Pour les rfrences dates, seule ldition cite sapplique. Pour les rfrences non dates, la der- nire dition du document de rfrence sapplique (y compris les ventuels amendements). ISO 6165, Engins de terrassement Principaux types Vocabulaire BSISO67461:2003IS-6476 O1:(3002E/)F 2 I SO 3002 All irthgs e

37、rse/devrTsuo iordts rsesvr3 Terms and definitions 3 Termes et dfinitions For the purposes of this part of ISO 6746, the terms and definitions given in ISO 6165 and the following apply. Pour les besoins du prsent document, les termes et dfinitions donns dans lSO 6165 ainsi que les suivants sappliquen

38、t. 3.1 three-dimensional reference system system used to determine dimensions of earth- moving machines See Figure 1. 3.1 systme de rfrence trois dimensions systme utilis pour dterminer les dimensions des engins de terrassement Voir Figure 1. 3.1.1 zero Y plane vertical plane which passes through th

39、e longitudinal centreline of the machine 3.1.1 plan Y zro plan vertical qui passe par laxe longitudinal de len- gin 3.1.2 X plane any vertical plane perpendicular to the Y plane 3.1.2 plan X tout plan vertical perpendiculaire au plan Y 3.1.3 Z plane any horizontal plane perpendicular to the X and Y

40、planes 3.1.3 plan Z tout plan horizontal perpendiculaire aux plans X et Y 3.1.4 positive coordinate positive direction, forward from the zero X plane, right from the zero Y plane and above the zero Z plane NOTE 1 The intersection of the X, Y, Z axes (zero planes) is normally located at a well-define

41、d base point: i.e. SIP for a seat as defined in ISO 5353; crankshaft centreline for an engine; sprocket or rear axle centreline for a tractor-dozer; ground line for machine measure- ments. NOTE 2 If only components (e.g. engine, seat) are shown, the location and positive direction of the axis from t

42、he intersection of the X, Y, Z axes (zero planes) assume the normally expected orientation of the component to a machine, i.e. number one cylinder of engine to the front of the machine, seat facing to the front. NOTE 3 If the machine or its equipment or attachment or all these are illustrated, a mac

43、hine driving from right to left is shown. 3.1.4 coordonne positive coordonne situe dans la direction positive: en avant du plan X zro, droite du plan Y zro et au- dessus du plan Z zro NOTE 1 Lintersection des axes X, Y, Z (plans zro) est habituellement situe en un point de base bien dfini, savoir, S

44、IP pour un sige tel que dfini dans lISO 5353, axe du vilebrequin pour un moteur, axe du barbotin ou de lessieu arrire pour un tracteur, ligne de rfrence au sol pour des mesurages sur engins. NOTE 2 Si lon a reprsent uniquement des compo- sants (par exemple un moteur, un sige), lemplacement et la dir

45、ection positive de laxe par rapport lintersection des axes X, Y, Z (plans zro) ont lorientation normale- ment prvue du composant par rapport un engin, cest- -dire premier cylindre du moteur par rapport lavant de lengin, sige face lavant. NOTE 3 Si un engin ou son quipement ou ses ac- cessoires ou le

46、nsemble de ceux-ci sont illustrs, ils sont reprsents comme se dplaant de droite gauche. BSISO67461:2003IS-6476 O1:(3002E/)F I SO 3002 All irthgs erse/devrTsuo iordts rsesvr 3Figure 1 Three-dimensional reference system Figure 1 Systme de rfrence trois dimensions BSISO67461:2003IS-6476 O1:(3002E/)F 4

47、I SO 3002 All irthgs erse/devrTsuo iordts rsesvr3.2 ground reference plane GRP plane on which the machine is placed for measure- ments: in the case of the base machine, a hard, level surface; in the case of equipment and attach- ments, either a hard, level surface or compacted earth NOTE The surface

48、 used depends on the intended use of the machine and its equipment and attachments. This needs to be defined when developing specific ISO terminology standards or commercial specifications. 3.2 plan de rfrence au sol PRS plan sur lequel lengin est plac pour les mesures: dans le cas des engins de base, surface plane dure; dans le cas des quipements et accessoires, soit une surface plane dure ou terre compacte NOTE La su