BS ISO 603-6-1999 Bonded abrasive products - Dimensions - Grinding wheels for tool and toolroom grinding《粘合磨料产品 尺寸 工具和工具室磨削用砂轮》.pdf

《BS ISO 603-6-1999 Bonded abrasive products - Dimensions - Grinding wheels for tool and toolroom grinding《粘合磨料产品 尺寸 工具和工具室磨削用砂轮》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 603-6-1999 Bonded abrasive products - Dimensions - Grinding wheels for tool and toolroom grinding《粘合磨料产品 尺寸 工具和工具室磨削用砂轮》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS ISO 603-6:1999 ICS 25.

2、100.70 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Bonded abrasive products Dimensions Part 6: Grinding wheels for tool and toolroom grindingThis British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authori

3、ty of the Standards Committee and comes into effect on 15 November 1999 BSI 11-1999 ISBN 0 580 35702 3 BS ISO 603-6:1999 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 603-6:1999 and implements it as the UK national standard

4、. The UK participation in its preparation was entrusted to Technical Committee MTE/13, Grinding wheels, abrasive tools, paper, cloths and powder, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the in

5、terpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards

6、which implement international publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purpor

7、t to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cov

8、er, the ISO title page, pages ii and iii, a blank page, pages 1 to 8, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.A Referencenumbe r ISO6036:1999 (E) INTERNATIONAL STANDARD ISO 6036 Firstedition 19990715 Bonde

9、dabrasiveproducts Dimensions Part6: Grindingwheelsfortoolandtoolroomgrinding ProduitsabrasifsagglomrsDimensions Partie6:MeulespourafftagedoutilsISO6036:1999(E) ii Contents Page 1Scop e1 2Normativereference s1 3Dimension s.2 3.1Type1:Straightgrindingwheel(generalapplication )2 3.2Type3:Wheeltaperedon

10、onesid e.2 3.3Type5:Wheelrecessedononesid e3 3.4Type7:Wheelrecessedonbothside s.3 3.5Type1:Straightgrindingwheel(sawsharpening ).4 3.6Type6:Straightcupwhee l5 3.7Type11:Tapercupwhee l5 3.8Type12:Dishwheel 6 4Designatio n6 5Specification s.7 5.1Tolerance s.7 5.2Balancin g.7 5.3Markin g7 Bibliography8

11、 ISO6036:1999(E) iii Foreword ISO (the InternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitte

12、ehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnongovernmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStanda

13、rdsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtoth ememberbodiesforvoting. PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. InternationalStandardISO6036waspr

14、eparedbyTechnicalCommitteeISO/TC 29,Smalltools,subcommittee SC5, Grindingwheelsandabrasives . Thisfirstedition,togetherwithISO6031:1999toISO6035:1999andISO6037:1999toISO 60316:1999 , cancels andreplacesISO/R603:1967,ISO6032:1981,ISO1117:1975,ISO2220:1972,ISO2933:1974,ISO 3290:1976 andISO3921:1976asa

15、technicalrevisionofthesestandards. ISO603consistsofthefollowingparts,underthegeneraltitle BondedabrasiveproductsDimensions : Part1:Grindingwheelsforexternalcylindricalgrindingbetweencentres Part2:Grindingwheelsforcentrelessexternalcylindricalgrinding Part3:Grindingwheelsforinternalcylindricalgrindin

16、g Part4:Grindingwheelsforsurfacegrinding/peripheralgrinding Part5:Grindingwheelsforsurfacegrinding/facegrinding Part6:Grindingwheelsfortoolandtoolroomgrinding Part7:Grindingwheelsformanuallyguidedgrinding Part8:Grindingwheelsfordeburringandfettling/snagging Part9:Grindingwheelsforhighpressuregrindin

17、g Part10:Stonesforhoningandsuperfinishings Part11:Handfinishingsticks Part12:Grindingwheelsfordeburringandfettlingonastraightgrinder Part13:Grindingwheelsfordeburringandfettlingonaverticalgrinder Part14:Grindingwheelsfordeburringandfettling/snaggingonananglegrinder Part15:Grindingwheelsforcuttingoff

18、onstationaryormobilecuttingoffmachines Part16:GrindingwheelsforcuttingoffonhandheldpowertoolsINTERNATIONALSTANDARD ISO6036:1999(E) 1 BondedabrasiveproductsDimensions Part6: Grindingwheelsfortoolandtoolroomgrinding 1Scope ThispartofISO603specifiesthenominaldimensions,inmillimeters,of: Type1:Straightg

19、rindingwheel(generalapplictaionandsawsharpening) Type3:Wheeltaperedononeside Type5:Wheelrecessedononeside Type6:Straightcupwheel Type7:Wheelrecessedonbothsides Type11:Tapercupwheel Type12:Dishwheel Thesebondedabrasiveproductsareintendedtobeusedforgrindingorregrindingofcuttingfacesandedgeso f tools.

20、Theworkpiecesandthegrindingwheelsaremechanicallyguided. 2Normativereferences The following normativedocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsof this partofISO 603.Fordatedreferences,subsequentamendmentsto,orrevisionsof,anyofthesepublicationsdo notapply.However,p

21、artiestoagreementsbasedonthispartofISO 603areencouragedtoinvestigatethe possibilityofapplyingthemostrecenteditionsofthenormativedocumentsindicatedbelow.For undated references,thelateseditionofthenormativedocumentreferre dtoapplies.MembersofISOandIECmaintain registersofcurrentlyvalidInternationalStan

22、dards. ISO525:1999, BondedabrasiveproductsGeneralrequirements . ISO6103:1999, BondedabrasiveproductsStaticbalancingofgrindingwheelsTesting . ISO13942: 1) , BondedabrasiveproductsLimitdeviationsandrunouttolerances . 1) Tobepublished.ISO6036:1999(E) 2 3Dimensions 3.1Type1:Straightgrindingwheel(general

23、application) SeeFigure1andTable1. Figure1Type1 Table1DimensionsofType1 DTH 6101316202532131620253251 50XXXX 100 X X X X X 125XXXXXX 150XXXXXXXXX 175XXXXXXXX 200XXXXXXXXXXX 250XXXX 300XXXX 3.2Type3:Wheeltaperedononeside SeeFigure2andTable2. Figure2Type3 Table2DimensionsofType3 DTHJU 80 5 13 40 1 100

24、6 20 50 1,5 125 150 175 200 250 7 8 10 13 14 20 32 32 63 75 85 100 125 2 3 ISO6036:1999(E) 3 3.3Type5:Wheelrecessedononeside SeeFigure3andTable3. Figure3Type5 Table3DimensionsofType5 DTHPF a R max 150 32 20 32 80 16 175 32 32 90 16 3,2 200 40 32 50,8 110 20 250 40 50,8 76,2 150 20 300 45 50 76,2 150

25、 20 25 5 400 50 127 215 25 a Thevalue F istakenlessthanorequaltohalfthickness T. 3.4Type7:Wheelrecessedonbothsides SeeFigure4andTable4. Figure4Type7 Table4DimensionsofType7 DTHPFGR max 300 400 50 65 76,2 127 150 215 10 10 5ISO6036:1999(E) 4 3.5Type1:Straightgrindingwheel(sawsharpening) SeeFigure5and

26、Table5. Figure5Type1 Table5DimensionsofType1 DTH DTH DTH 13,210 1,3 4 200 13 32 1,6 5 16 100 2 20 150 6 32 20 2,5 8 3 3103,2 3,2 13 4 4165 126 1,3 2,5 250 8 32 1,6 3 10 125 2 20 3,2 13 2,5 4 16 3,2 200 5 20 20 4625 1,6 8 5 2106 2,5 13 8 31610 150 3,2 20 20 300 13 32 4216 52,520 6325 8 200 3,2 32 32

27、1,6 4 150 2 32 5 2,5 6 38 ISO6036:1999(E) 5 3.6Type6:Straightcupwheel SeeFigure6andTable6. Figure6Type6 Table6DimensionsofType6 DTHWE min. 50 80 100 32 40 50 13 20 5 6 8 8 10 125 63 20 32 813 150 180 80 80 32 10 16 16 16 3.7Type11:Tapercupwheel SeeFigure7andTable7. Figure7Type11 Table7DimensionsofTy

28、pe11 DTHJKWE min. 50 80 32 13 27 57 22 46 4 6 8 100 125 40 20 20 32 71 96 56 81 810 150 180 50 32 114 144 96 120 10 13 13 13ISO6036:1999(E) 6 3.8Type12:Dishwheel SeeFigure8andTable8. Figure8Type12 Table8DimensionsofType12 DTHJ = KWE min. U 80 10 13 31 4 6 2,5 100 125 150 180 200 13 13 16 20 20 20 20

29、 32 32 36 61 66 76 90 5 6 8 10 10 7 7 9 11 12 3,2 4Designation Acompletedesignationofabondedabrasiveproductinaccordancewit h this part of ISO 603 shall be consist of the followinginformation: a) b) designationofthebondedabrasives,e.g.Straightcupwheel; referenceofthispartofISO603; c) d) e) f) type(sh

30、ape); dimensions; specificationsofaninternalnature; themaximumoperatingspeed. InaccordancewithISO525 andthispartofISO603 EXAMPLE Astraightcupwheelforregrindingofcuttingfaces,Typ e6, D=125mm , T=63mm , H=32mm , W=8mm, E=13m m nature of abrasiveC , grain size60 , gradeI , structure6 , nature of bond V

31、 and a maximum operating speed of32m/sisdesignatedasfollows: StraightcupwheelISO60366125 363 332/8/13C60I6V32m/s ISO6036:1999(E) 7 5Specifications Thespecificationsarelefttothemanufacturesdiscretion,seeISO525. 5.1Tolerances LimitdeviationsandrunouttolerancesinaccordancewithISO13942. 5.2Balancing Bal

32、ancingisinaccordancewithISO6103. 5.3Marking MarkingofbondedabrasiveproductsisinaccordancewithISO525.ISO6036:1999(E) 8 Bibliography 1ISO84861, BondedabrasivesDeterminationanddesignationofgrainsizedistributionPart1:MacrogritsF4 toF220 . 2ISO84862, BondedabrasivesDeterminationanddesignationofgrainsized

33、istributionPart2:Microgrits F230toF1200 .BS ISO 603-6:1999 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

34、| | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions Brit

35、ish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity wh

36、ile using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automa

37、tically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the

38、BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI elec

39、tronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase pri

40、ce of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except a

41、s permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the

42、course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.