BS ISO 5611-2-2015 Cartridges type A for indexable inserts Style F《可转位A型刀夹头 F型》.pdf
《BS ISO 5611-2-2015 Cartridges type A for indexable inserts Style F《可转位A型刀夹头 F型》.pdf》由会员分享,可在线阅读,更多相关《BS ISO 5611-2-2015 Cartridges type A for indexable inserts Style F《可转位A型刀夹头 F型》.pdf(16页珍藏版)》请在麦多课文档分享上搜索。
1、BSI Standards PublicationBS ISO 5611-2:2015Cartridges, type A, forindexable insertsPart 2: Style FBS ISO 5611-2:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 5611-2:2015.Together with BS ISO 5611-1, BS ISO 5611-3, BS ISO 5611-4, BS ISO5611-5, BS ISO 5611
2、-6, BS ISO 5611-7, BS ISO 5611-8, BS ISO 5611-9,BS ISO 5611-10, BS ISO 5611-11 and BS ISO 5611-12 it supersedes BS 4193-8:1997 (dual numbered as ISO 5611:1995) which will bewithdrawn upon publication of the rest of the parts in this series.The UK participation in its preparation was entrusted to Tec
3、hnicalCommittee MTE/18, Tools tips and inserts for cutting applications.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplic
4、ation. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 88413 9ICS 25.100.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committe
5、e on 30 November 2015.Amendments/corrigenda issued since publication Date Text affectedBS ISO 5611-2:2015 ISO 2015Cartridges, type A, for indexable inserts Part 2: Style FCartouches du type A, plaquettes amovibles Partie 2: Forme FINTERNATIONAL STANDARDISO5611-2First edition2015-11-01Reference numbe
6、rISO 5611-2:2015(E)BS ISO 5611-2:2015ISO 5611-2:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, elect
7、ronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier
8、, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 5611-2:2015ISO 5611-2:2015(E)Foreword iv1 Scope . 12 Normative references 13 Dimensions . 14 Designation 45 Material 56 Design 56.1 Method of holding 56.2 Corner radius r.56.3 Adjusting screw 67 Extent of
9、 delivery . 68 Marking 6 ISO 2015 All rights reserved iiiContents PageBS ISO 5611-2:2015ISO 5611-2:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is norm
10、ally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in t
11、he work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the
12、 different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this docume
13、nt may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/
14、patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO prin
15、ciples in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 29, Small tools, Subcommittee SC 9, Tools with defined cutting edges, cutting items.This first edition of ISO 5611-2, together with ISO 561
16、1-1, ISO 5611-3, ISO 5611-4, ISO 5611-5, ISO 5611-6, ISO 5611-7, ISO 5611-8, ISO 5611-9, ISO 5611-10, ISO 5611-11, and ISO 5611-12, cancels and replaces ISO 5611:1995, which has been technically revised.ISO 5611 consists of the following parts, under the general title Cartridges, type A, for indexab
17、le inserts: Part 1: General survey, correlation and determination of dimensions Part 2: Style F Part 3: Style G Part 4: Style J Part 5: Style K Part 6: Style L Part 7: Style R Part 8: Style S Part 9: Style T Part 10: Style U Part 11: Style W Part 12: Style Yiv ISO 2015 All rights reservedBS ISO 5611
18、-2:2015INTERNATIONAL STANDARD ISO 5611-2:2015(E)Cartridges, type A, for indexable inserts Part 2: Style F1 ScopeThis part of this ISO 5611 applies for cartridges type A, with hole(s) for fastening screw(s), of style F, i.e. with cutting edge angle r= 90 for end cutting.Cartridges are intended to be
19、used with indexable inserts made of hard metal, ceramic, or other cutting materials and are primarily mounted to be used for internal turning of operations.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its ap
20、plication. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 1832, Indexable inserts for cutting tools D esignationISO 5608, Turning and copying tool holders and cartridges for indexable
21、inserts D esignationISO 5611-1, Cartridges, type A, for indexable inserts Part 1: General survey, correlation and determination of dimensions3 DimensionsCartridges type A need not comply with the pictorial representation, only the dimensions given shall be observed.For determination of dimensions h1
22、, f and l1see ISO 5611-1. For explanation of the designation code for cartridges, see ISO 5608.4NOTE For other dimensions, see Figure 2Figure 1 Style F with height h1= 6 mm and 8 mm with rhombic indexable insert ISO 2015 All rights reserved 1BS ISO 5611-2:2015ISO 5611-2:2015(E)Figure 2 Style F with
23、height h1= 8 mm, 10 mm, 12 mm, 16 mm and 20 mm with triangular insertFigure 3 Style F with height h1= 25 mm with triangular indexable insertFigure 4 Sectional drawing A-A at height h1= 6 mm, 8 mm, 10 mm and 12 mm2 ISO 2015 All rights reservedBS ISO 5611-2:2015ISO 5611-2:2015(E)Figure 5 Sectional dra
24、wing A-A at height h1= 16 mm, 20 mm and 25 mmNOTE Pictured is a right hand cartridge (Figure 4); left hand cartridge (Figure 5) laterally reversed.Table 1Dimensions in millimetresSymbolah1l4b d1bd2ce f h2l1l2l3tFastening screw0,08 0 0,2 min. H130 0,080 0,2 min. 0,13SCFPR 06CA 056 5,6 6 20 4 12 8 8,5
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSISO561122015CARTRIDGESTYPEAFORINDEXABLEINSERTSSTYLEF 可转位 夹头 PDF

链接地址:http://www.mydoc123.com/p-587541.html