BS ISO 4149-2005 Green coffee - Olfactory and visual examination and determination of foreign matter and defects《生咖啡 嗅觉和视觉检验及对杂质和缺陷的测定》.pdf

《BS ISO 4149-2005 Green coffee - Olfactory and visual examination and determination of foreign matter and defects《生咖啡 嗅觉和视觉检验及对杂质和缺陷的测定》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 4149-2005 Green coffee - Olfactory and visual examination and determination of foreign matter and defects《生咖啡 嗅觉和视觉检验及对杂质和缺陷的测定》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 4149:2005 Green coffee Olfactory and visual examination and determination of foreign matter and defects ICS 67.140.20 BS ISO 4149:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 11 April 2005 BSI 11 April 2005 ISB

2、N 0 580 45776 1 National foreword This British Standard reproduces verbatim ISO 4149:2005 and implements it as the UK national standard. It supersedes BS 5752-4:1980 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee AW/15, Coffee, which has the responsi

3、bility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Sta

4、ndards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standa

5、rd does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European

6、 developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issu

7、ed. Amendments issued since publication Amd. No. Date Comments Reference number ISO 4149:2005(E) OSI 5002INTERNATIONAL STANDARD ISO 4149 Second edition 2005-03-01 Green coffee Olfactory and visual examination and determination of foreign matter and defects Caf vert Examens olfactif et visuel, et dte

8、rmination des matires trangres et des dfauts BSISO4149:2005IS:9414 O5002(E) DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfepcaes. In ccaocnadrw eith Aebods licensilop gnic,y this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dn

9、anstlaled t noeh computfrep reormign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infriigngn Aebods licensilop gnic.y ehT ISO tneClar Secrteiraat caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacud

10、orp erts sut deo crtaee this PDF file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion marapterew setpo erimizde for irpnti.gn Evyre caer neeb sah taken to sneeru that the file is suitlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,d

11、nuo plsaee inform ttneC ehlar Secrteiraat ta the serddaig sleb nevwo. ISO 5002 All irthgs erse.devr lnUeto sswrehise specified, on trap fo this lbupictaion maeb y cudorperro de tuilizi den yna form ro na ybm ynae,s lecetrinoc ro mecinahcal, inclidung tohpcoiypodna gn micrfoilm, wittuoh repmissii non

12、 writign from ietI rehSa Ot tsserdda eh ebolw or ISOs memreb i ydobn the cnuotrfo y ttseuqer ehe.r ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mail coirypthgiso.o gr We bwww.is.o gro Pulbisdehi n Switlrez dnaii ISO 5002 Allr ithgsr esedevrB

13、SISO4149:2005IS:9414 O5002(E) I SO 5002 All irthgs ersedevr iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical com

14、mittees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

15、 International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft Internatio

16、nal Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be t

17、he subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 4149 was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 15, Coffee. This second edition cancels and replaces the first edition (ISO 4149:1980), which has been

18、technically revised. BSISO4149:2005blank 5002:9414OSISBINTENRATIONAL TSANDADR IS:9414 O5002(E)I SO 5002 All irthgs ersedevr 1Green coffee Olfactory and visual examination and determination of foreign matter and defects 1 Scope This International Standard specifies methods for the olfactory and visua

19、l examination and for the determination of foreign matter and defects in green coffee from all origins, in order to assess conformity with a specification or a contract. These methods can also be used for determining one or more of the characteristics of green coffee with an impact on coffee quality

20、 for technical, commercial, administrative and arbitration purposes, and for quality control or quality inspection. This International Standard is applicable to green coffee as defined in ISO 3509. 2 Normative references The following referenced documents are indispensable for the application of thi

21、s document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3509, Coffee and coffee products Vocabulary ISO 4072, Green coffee in bags Sampling ISO 10470:2004, Green coffee Defect refe

22、rence chart 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 3509 apply. 4 Sampling Take a laboratory sample of 300 g, prepared in accordance with ISO 4072. The same laboratory sample may later be used for size analysis (see ISO 4150) provided that it

23、 is fully reconstituted for this further test. 5 Olfactory examination 5.1 Procedure 5.1.1 The olfactory examination shall be carried out on the laboratory sample before any other examination is made. 5.1.2 After having recorded the label information on a record form, open the package, bring the nos

24、e as close to the whole sample as possible and sniff sharply. BSISO4149:2005IS:9414 O5002(E) 2 I SO 5002 All irthgs ersedevr5.2 Evaluation 5.2.1 Evaluate the odour and record as follows: a) “normal odour”, if no disagreeable odour nor any odour foreign to coffee is detected; b) “abnormal odour”, if

25、any disagreeable odour or any odour foreign to coffee is detected. If recognisable, any foreign odour should be described, indicating the matter to which it belongs or which it suggests. 5.2.2 In doubtful cases, if there is a suspicion of an abnormal odour, a clean, odourless container shall be half

26、-filled with coffee from the laboratory sample, closed hermetically, and held for a minimum of 1 h at room temperature. The container shall be opened and the evaluation of the odour repeated. 6 Visual examination 6.1 Procedure After the olfactory examination, spread the laboratory sample over a plai

27、n orange or black surface under diffuse daylight (not direct sunlight) or artificial light reproducing daylight as closely as possible. 6.2 Evaluation 6.2.1 Examine the general appearance of the laboratory sample to assess the following: a) the botanical origin of the coffee (e.g. arabica, canephora

28、); b) the overall colour and its uniformity. 6.2.2 Record observations describing the overall colour as bluish, greenish, greyish green, whitish, yellowish, or brownish. 7 Determination of foreign matter and defects 7.1 Principle The foreign matter and the defective beans are separated into categori

29、es and then weighed. The final expression of results gives the impact on quality of the defects found, as defined in ISO 10470 and is quantified in Quality Impact Units. The definitions in ISO 3509 relating to foreign matter and defects apply. BSISO4149:2005IS:9414 O5002(E) I SO 5002 All irthgs erse

30、devr 37.2 Apparatus 7.2.1 Analytical balance, capable of weighing to the nearest 0,1 g. 7.3 Procedure 7.3.1 Defects are not counted and weighed, as used to be the case, but are determined solely by weighing. 7.3.2 Weigh the green coffee laboratory sample (see Clause 4) to the nearest 0,1 g and take

31、it as the test portion. 7.3.3 Spread the test portion over a plain orange or black surface and examine it under diffuse daylight (not direct sunlight) or artificial light reproducing daylight as closely as possible. For a better and more accurate identification, refer to ISO 10470:2004, Annex C, whi

32、ch shows colour photographs of defects and foreign matter. 7.3.4 Pick out all foreign matter and defective beans and group them by categories in accordance to ISO 10470. Put them in separated piles or different containers. 7.3.5 Weigh, to the nearest 0,1 g, each category of the foreign matter and de

33、fects. 7.4 Expression of results Record the mass, in grams, of the foreign matter and defects found in the test portion. Determine the mass fraction of the foreign matter and defects, w, in percent, using the following formula: 0 100 m w m =% where m 0is the total mass, in grams, of the foreign matt

34、er or defects in question; m is the mass, in grams, of the test portion. Multiply the mass fraction of each defect and foreign matter by the factor “0”, “0,5” or “1” associated with the specific defect and representing its influence on the loss in mass and/or the sensorial concern, as specified in I

35、SO 10470. An example of a typical determination is given in Annex A. 8 Test report The test report shall specify: a) all information necessary for the complete identification of the sample; b) the sampling method used, if known; c) the test method used, with reference to this International Standard;

36、 d) all operating details not specified in this International Standard, or regarded as optional, together with details of any incidents which may have influenced the test result(s); e) the test result(s) obtained or, if a repeatability check has been made, the final result obtained. BSISO4149:2005IS

37、:9414 O5002(E) 4 I SO 5002 All irthgs ersedevrAnnex A (informative) Example of a typical determination Take a representative sample of 300 g, after having performed adequate sampling following the procedure given in ISO 4072. Spread the test portion over a plain orange or black surface and examine i

38、t under diffuse daylight (not direct sunlight) or artificial light reproducing daylight as closely as possible. For a better identification, refer to ISO 10470:2004, Annex C, which shows colour photographs of the defects. Pick out all foreign matter and defective beans and group them by categories a

39、s defined in ISO 10470. Put them in separated piles or different containers. Weigh, to the nearest 0,1 g, each category of foreign matter and defects and calculate their mass fractions in percent. The impact of foreign matter and defects on the quality of the coffee is calculated for both the loss i

40、n mass and the sensorial concern by multiplying each percentage by the coefficient found in the defect reference chart of ISO 10470. The final values obtained are equivalent to so-called “Quality Impact Units”. A hypothetical example is shown in Table A.1. Table A.1 Example of results Loss in mass S

41、ensorial concern Defect Mass g Percentage of total CoefficientActual Coefficient Actual Stones 1,2 0,4 1,0 0,4 0 0 Beans in parchment 3,0 1,0 0,5 0,5 0 0 Black beans 3,0 1,0 0 0 1,0 3,00 Immature beans 10,5 3,5 0 0 0,5 1,75 Spongy beans 9,0 3,0 0,5 1,5 0,5 1,50 Brown beans 7,5 2,5 0 0 1,0 2,50 Sound

42、 beans 265,8 88,6 TOTAL 300,0 100,0 2,4 8,75 This procedure may be applied to any contract for the purchase of green coffee which may be negotiated between a provider and client. For a certain defect(s), the contract may impose either a maximum mass fraction in percent or a maximum value of “Quality

43、 Impact Units”. Such limits may be defined in advance between the two parties. BSISO4149:2005IS:9414 O5002(E) I SO 5002 All irthgs ersedevr 5Bibliography 1 ISO 1446, Green coffee Determination of water content Basic reference method 2 ISO 4150, Green coffee Size analysis Manual sieving 3 ISO 6673, G

44、reen coffee Determination of loss in mass at 105 C BSISO4149:2005BS ISO 4149:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the int

45、ernational level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services.

46、 We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members

47、 an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20

48、8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on s

49、tandards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: i