BS ISO 3888-1-1999 Passenger cars - Test track for a severe lane-change manoeuvre - Double-lane change《客车 急剧改变车道的操纵用试验车道 第1部分 两车道变换》.pdf

《BS ISO 3888-1-1999 Passenger cars - Test track for a severe lane-change manoeuvre - Double-lane change《客车 急剧改变车道的操纵用试验车道 第1部分 两车道变换》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 3888-1-1999 Passenger cars - Test track for a severe lane-change manoeuvre - Double-lane change《客车 急剧改变车道的操纵用试验车道 第1部分 两车道变换》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS ISO 3888-1:1999 ICS 43

2、.020 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Passenger cars Test track for a severe lane-change manoeuvre Part 1: Double-lane changeThis British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of

3、 the Standards Committee and comes into effect on 15 November 1999 BSI 11-1999 ISBN 0 580 35348 6 BS ISO 3888-1:1999 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard reproduces verbatim ISO 3888-1:1999 and implements it as the UK national standard. T

4、he UK participation in its preparation was entrusted to Technical Committee AUE/15, Safety related to vehicles, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for cha

5、nge, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or E

6、uropean publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the n

7、ecessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page

8、, pages ii and iii, a blank page, pages 1 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.A Referencenumbe r ISO38881:1999 (E) INTERNATIONAL STANDARD ISO 38881 Firstedition 19991001 PassengercarsTesttrackforasevere lanechangemano

9、euvre Part1: Doublelanechange VoituresparticuliresPistedessaidedbotementlatralbrusque Partie1:DoubledbotementISO38881:1999(E) ii Foreword ISO (the InternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).TheworkofpreparingInternationalStandardsisn

10、ormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnongovernmental,in liaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInt

11、ernationalElectrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtoth ememberbodiesforvoting. PublicationasanInter

12、nationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. InternationalStandardISO 38881waspreparedbyTechnicalCommitteeISO/TC 22,Roadvehicles , SubcommitteeSC9, Vehicledynamicsandroadholdingability . ItcancelsandreplacesISO/TR 3888:1975.Duetothesubjectivenatureofthetest,onlyth edime

13、nsionsfora severedoublelanechangetrackhavebeenretainedfromISO/TR3888forthispar t of ISO 3888. This should result inmorecomparablemeasurementswhenuse d for investigations on vehicle dynamics. Theprincipleandexamples oftestsonseverelanechangemanoeuvresspecifiedinISO/TR3888havebeenincludedinISO38881for

14、 information(seeannexA). ISO 3888consistsofthefollowingparts,underth e general title, RoadvehiclesTestprocedureforaseverelane changemanoeuvre: Part1:Doublelanechange Part2:Obstacleavoidance AnnexAofthispartofISO3888isforinformationonly. ISO38881:1999(E) iii Introduction Theseverelanechangemanoeuvrei

15、sawellknowntestmethodwhichisgenerallyusedforsubjectiveevaluation ofvehicledynamics. TheseverelanechangemanoeuvretestmethodwaspreviouslydescribedinaTechnicalReport(ISO/TR),and untilnowhasnotbeendealtwithinanInternationalStandard.Thereasonforthiswasthatthedriverhasagreat influenceontestresults.Thetest

16、methoditselfhasnowbeenplacedinaninformativeannex,permittingthe specificationforthetesttracktobepublishedasanInternationalStandard.Noclosedlooptesthassofarbeen specifiedinanInternationalStandardforthepurposeofinvestigatingvehicledynamics. Sincetestperformedontheseverelanechangetrackquantifiesonlyasma

17、llpartofcompletehandling characteristics, the results obtained on thistesttrackcanonlybeconsideredsignificantforacorrespondinglysmall aspectofoverallvehicledynamicsbehaviour.Therefore,itisnotpossiblet ousethispartofISO 3888andtest resultsforregulationpurposes.INTERNATIONALSTANDARD ISO38881:1999(E) 1

18、 PassengercarsTesttrackforaseverelanechange manoeuvre Part1: Doublelanechange 1Scope ThispartofISO3888specifiesthedimensionsofthetesttrackforaclosedlooptestmethodtosubjectively determineadoublelanechangewhichisonepartofthevehicledynamicsandroadholdingabilityofpassenger cars.Itisapplicabletopassenger

19、carsasdefinedinISO 3833.Itisalsoapplicabletoligh tcommercialvehiclesup toagrossvehiclemassof3,5t. 2Normativereference Thefollowingnormativedocumentcontainsprovisionswhich,throughreferenceinthis text, constitute provisions of this partofISO 3888.F or datedr eferences,s ubsequentamendmentsto,orrevisio

20、nsof,anyofthesepublicationsdonot apply.However,partiestoagreementsbasedon this part of ISO 3888 are encouragedtoinvestigateth e possibility of applying themostrecenteditionofthenormativedocumentindicatedbelow.Forundatedreferences,thelatestedition ofthenormativedocumentreferredtoapplies.MembersofISOa

21、ndIECmaintainregistersofcurrentlyvalid InternationalStandards. ISO3833:1977, RoadvehiclesTypesTermsanddefinitions . 3Termanddefinition ForthepurposesofthispartofISO3888thefollowingtermanddefinitionapply. 3.1 vehiclewidth overallwidthofthevehiclewithoutrearviewmirrorsISO38881:1999(E) 2 4Specification

22、s 4.1Dimensionsofthedoublelanechangetrack Track dimensions for adoublelanechangearerepresentedinFigur e 1andspecifiedinTabl e 1.Thevehicletobe testedisdriventhroughthistrack. Thelengthsoftracksectionsarefixed.Thewidthsareafunctionofvehicl e width. The total length of the track shall be125m. Key 1 Dr

23、ivingdirection 4 Section1 7 Section4 2 Laneoffset 5 Section2 8 Section5 3 Width 6 Section3 9 Section6 Figure1Doublelanechangetrackanddesignationofsections Table1Dimensionsofthedoublelanechangetrack Dimensionsinmetres Section Length Laneoffset Width 1 15 1,1 vehiclewidth +0,25 2 30 3 25 3,5 1,2 vehic

24、lewidth +0,25 4 25 5 15 1,3 vehiclewidth +0,25 6 15 1,3 vehiclewidth +0,25 4.2Markingofthedoublelanechangetrack The double lanechang e track shall be marked withconesofminimumheight50 0 mm;suitableconesaredepicted in Figure 2. The cones shall be placed at pointsspecifiedbyFigur e 3,andthetracklimits

25、shallbetangentialtothe basecirclesofthecones. ISO38881:1999(E) 3 Dimensionsinmillimetres Key 1 Basecircleofcone Figure2Coneusedformarkingdoublelanechangetrack Key 1 Drivingdirection 4 Section1 7 Section4 2 Laneoffset 5 Section2 8 Section5 3 Width 6 Section3 9 Section6 Figure3Placingofconesformarking

26、thedoublelanechangetrackISO38881:1999(E) 4 AnnexA (informative) Testmethod A.1Severedoublelanechangemanoeuvre A.1.1Principle Theseveredoublelanechangemanoeuvreisadynamicprocessconsistingofrapidlydrivingavehiclefromits initiallanetoanotherlaneparalleltotheinitiallane,andreturningtotheinitiallane,with

27、ou texceedinglane boundaries. A.1.2Useasanevaluationmethodforcertainaspectsofroadholdingability Thebasicideainthechoiceoftheseverelanechangemanoeuvreintheyear1970wast o create a test method for transientroadholdingabilitywithwhichtheclosedcontrolloopcouldbetestedinasituationencounteredintraffic. Ori

28、ginallytheproposedtestseemedtobesuitableforthispurposesincethedriver wasnotonlytoobservethe givenlanesbutalsotoselectthevehiclepathwithinthetracklimits. This process, which could be describedasatypeofanticipatorycontrol,isofgreatimportanceforthebehaviourof thesystem“drivervehicleenvironment ”inactua

29、ldrivingsituations.Here,thetaskisnearlyalwaystoselecta propercourseandtokeeponitwithcertainaccuracygiventhesituation. A.1.3Problems Intryingtokeepthetestmethodassimpleaspossible,thepassingtimethroughth ecoursewasfirstproposedas thesoleevaluationcriterion.Numerouscomparativetestsindifferentcountriesl

30、edtotheconclusionthatthis criterionwasinsufficient.Forthisreason,numerousmeasurementsweresubsequentlymadeinwhichth evehicle input values and the relevant responses of the vehicle,togetherwiththesubjectiveevaluationbythedrivers,were coveredbydifferentcriteria. Theevaluationofalltestsgaveindetailthefo

31、llowingresultsanddemonstratedthefollowingproblems: althoughthetestwasdevelopedfortestinglateraldynamics,itwasfoundthatthelongitudinaldynamics (usabilityoftheenginepower)hadastronginfluence,whichexplainedaconsiderableamoun t of scatter in the dataandthusreflectedontheresults; theeliminationoflongitud

32、inaldynamicsdidnotleadtothedesiredresultinthecorrelationbetweenindividual measuredvaluesandsubjectiveevaluationcriteria; thedifferentpathsfollowedindifferenttestsalsobroughtabout aconsiderableamountofscatterinthedata andthustheresults. A.1.4Consequences For the reasons given in A.1.2 toA.1.3,thisInt

33、ernationalStandarddefinesonlythedimensionsofthetesttrackfor subjectiveevaluationofvehicledynamics. ISO38881:1999(E) 5 A.2Exampleoftests A.2.1General Onlyskilleddriversshallbeallowedtoperformthetest.Apassageisfaultlesswhennoneofth econespositioned asspecifiedin4.2havebeendisplaced. Themeasuringdistan

34、ce,forinstancetoevaluatetheaveragespeed,startsatthebeginningofsection1and finishesattheendofsection5. Thegearorselectorpositionengagedduringthetestshallbestatedinthetestreport. A.2.2Test1 The recommended speedofentryintosectio n 1is(8 0 3) km/h.Higherorlowerspeedsmaybeused.Thespeed ofentryshallbemen

35、tionedinthetestreport. Overthetestcoursethethrottlepositionshallbeheldassteadyaspossible. Furtherconstraints,suchassteerstrategyused,maybeapplied. Thespeedofexitfromsection5shallbestatedinthetestreport. Sometypicalusesofthistestare: toevaluate,withrespecttotime,thesteerinputormotionparameters; toeva

36、luatedrivercontrolstrategies; tosubjectivelyevaluatethevehicle. A.2.3Test2 Thespeedofentryintosection1shallbethemaximumpossiblespeedtocompletethetestcourse. Twoalternativethrottlepositionscanbeconsidered: overthetestcoursethethrottlepositionshallbeheldassteadyaspossible;ifnecessary ,thethrottleposit

37、ion suitableforthistestconditioncanbedeterminedbypreliminarytests; anythrottlepositioncanbeusedduringthetest. Thealternativechosenshallbestatedinthetestreport.BS ISO 3888-1:1999 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

38、 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents

39、 the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to

40、 improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000.

41、Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel

42、: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national,

43、 European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribi

44、ng members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be