BS ISO 366-4-2005 Textile machinery and accessories - Reeds - Dimensions and designation of plastic-bound metal reeds《纺织机械和附件 钢筘 塑料连接金属钢筘的尺寸和标记》.pdf

《BS ISO 366-4-2005 Textile machinery and accessories - Reeds - Dimensions and designation of plastic-bound metal reeds《纺织机械和附件 钢筘 塑料连接金属钢筘的尺寸和标记》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 366-4-2005 Textile machinery and accessories - Reeds - Dimensions and designation of plastic-bound metal reeds《纺织机械和附件 钢筘 塑料连接金属钢筘的尺寸和标记》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 366-4:2005 Textile machinery and accessories Reeds Part 4: Dimensions and designation of plastic-bound metal reeds ICS 59.120.30 BS ISO 366-4:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 7 November 2005 BSI 7 N

2、ovember 2005 National foreword This British Standard reproduces verbatim ISO 366-4:2005 and implements it as the UK national standard. It supersedes BS ISO 366-4:1992 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery, which has

3、 the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the U

4、K. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards C

5、orrespondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does

6、not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was

7、last issued. Amendments issued since publication Amd. No. Date Comments ISBN 0 580 46725 2 Reference number ISO 366-4:2005(E)INTERNATIONAL STANDARD ISO 366-4 Second edition 2005-05-01 Textile machinery and accessories Reeds Part 4: Dimensions and designation of plastic- bound metal reeds Matriel pou

8、r lindustrie textile Peignes Partie 4: Dimensions et dsignation des peignes mtalliques ligature plastique BS ISO 366-4:2005ii BS ISO 366-4:2005iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of

9、preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental,

10、 in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main t

11、ask of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attent

12、ion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 366-4 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry- cleaning

13、and industrial laundering, Subcommittee SC 3, Machinery for fabric manufacturing including preparatory machinery and accessories. This second edition cancels and replaces the first edition (ISO 366-4:1992), which has been technically revised. ISO 366 consists of the following parts, under the genera

14、l title Textile machinery and accessories Reeds: Part 1: Dimensions of pitch bound reeds Part 2: Dimensions and designation of metal reeds with plate baulk Part 3: Dimensions and designation of metal reeds with double-spring baulk Part 4: Dimensions and designation of plastic-bound metal reeds Part

15、5: Dimensions and designation of profil capsulas blank 1Textile machinery and accessories Reeds Part 4: Dimensions and designation of plastic-bound metal reeds 1 Scope This part of ISO 366 specifies the dimensions and designation of plastic-bound metal reeds for weaving machines. For the strip steel

16、 used in the manufacture of dents of reeds, see ISO 9473-1 and 9473-2. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

17、document (including any amendments) applies. ISO 366-5, Textile machinery and accessories Reeds Part 5: Dimensions and designation of profil capsulas ISO 9473-1, Textile machinery and accessories Strip steel for dents of reeds Part 1: Cold rolled strip steel ISO 9473-2, Textile machinery and accesso

18、ries Strip steel for dents of reeds Part 2: Hardened strip steel 3 Dimensions The indicated dimensions of plastic-bound metal reeds shown in Figure 1 and given in Table 1, and the tolerance of perpendicularity of dents according to Figure 2, shall be met. The heights of the bottom and top baulks sha

19、ll be subject to ISO 366-5 and to an agreement between the interested parties. 4 Designation The designation of plastic-bound metal reeds shall include the following information in the order given: a) “Plastic-bound metal reed”; b) reference to this part of ISO 366, i.e. ISO 366-4; c) inner height o

20、f reed, e, in millimetres; d) thickness of reed baulk, d, in millimetres; BS ISO 366-4:2005BS ISO 366-4:2005 2 e) width of the dents of the reed, b, in millimetres; f) type of steel used for dents of the reed, i.e. plain or stainless or hardened. EXAMPLE 1 A plastic-bound metal reed of inner height

21、e = 80 mm, of thickness of reed baulk d = 8 mm and having dents of width b = 4 mm, made from stainless steel shall be designated as follows: Plastic-bound metal reed ISO 366-4 80 8 4 stainless steel EXAMPLE 2 A plastic-bound metal reed of inner height e = 80 mm, of thickness of reed baulk d = 18 mm

22、and having dents of width b = 12 mm, made from hardened steel shall be designated as follows: Plastic-bound metal reed ISO 366-4 80 18 12 hardened steel 3Key a 1height of top profile f width of end piece a 2height of bottom profile h 1total height of reed B overall width of reed h 2height of bottom

23、baulk B Nusable width O opening b width of dents s thickness of dents d thickness of reed baulk t distance of dents e inner height of reed Figure 1 Plastic-bound metal reed BS ISO 366-4:20054 Key e inner height of reed h 1total height of reed s thickness of dents t distance of dents Figure 2 Toleran

24、ce of perpendicularity of dents in relation to base of reed BS ISO 366-4:2005 5Table 1 Plastic-bound metal reed dimensions Dimensions in millimetres Width of dents of reed b 3 4 6 8 12 Thickness of reed bulk d Inner height of reed e 6 8 10 12 18 50 60 70 80 90 100 110 120 130 140 150 160 170 180 BS

25、ISO 366-4:2005BS ISO 366-4:2005 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Char

26、ter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccur

27、acy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which

28、ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also a

29、vailable from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information

30、on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0

31、)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 70

32、01. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the co

33、pyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or othe

34、rwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.