BS ISO 3045-2004 Oil of bay [Pimenta racemosa (Mill ) J W Moore]《月桂[Pimenta racemosa (Mill ) J W Moore]油》.pdf

《BS ISO 3045-2004 Oil of bay [Pimenta racemosa (Mill ) J W Moore]《月桂[Pimenta racemosa (Mill ) J W Moore]油》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 3045-2004 Oil of bay [Pimenta racemosa (Mill ) J W Moore]《月桂[Pimenta racemosa (Mill ) J W Moore]油》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 3045:2004 Oil of bay Pimenta racemosa (Mill.) J.W. Moore ICS 71.100.60 BS ISO 3045:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 2 June 2004 BSI 2 June 2004 ISBN 0 580 43840 6 National foreword This British Stan

2、dard reproduces verbatim ISO 3045:2004 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee AW/54, Essential oils, which has the responsibility to: A list of organizations represented on this committee can be obtained on request

3、to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalo

4、gue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand th

5、e text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a fron

6、t cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Referen

7、ce number ISO 3045:2004(E)NINRETOITALAN ADNATSDR OSI 3540 ceSond deition -400251-50 Oil of bay Pimenta racemosa (Mill.) J.W. Moore Huile essentielle de bay Pimenta racemosa (Mill.) J.W. Moore Referecne unbmer OSI :5403)E(4002 OSI 4002INTERNATIONAL STANDARD ISO 3045 Second edition 2004-05-15 o liOf b

8、ay iPemecar atnomas ).lliM( W.J. erooM iuHlse esenteilld ee yab iPmr atneacemosa (Mill.) J.W. Mrooe BSISO3045:2004 ii BSISO3045:2004 iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing

9、International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaiso

10、n with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of tec

11、hnical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is dra

12、wn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 3045 was prepared by Technical Committee ISO/TC 54, Essential oils. This second edition cancels and replaces the

13、first edition (ISO 3045:1974), which has been technically revised. BSISO3045:2004blankINTENRATIONAL TSANDADR IS:5403 O4002(E)1Oil of bay Pimenta racemosa (Mill.) J.W. Moore 1 Scope This International Standard specifies certain characteristics of the oil of bay 1)Pimenta racemosa (Mill.) J.W. Moore,

14、in order to facilitate assessment of its quality. 2 Normative references The following referenced documents are indispen- sable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including

15、 any amendments) applies. ISO/TR 210, Essential oils General rules for packaging, conditioning and storage ISO/TR 211, Essential oils General rules for labelling and marking of containers ISO 212, Essential oils Sampling ISO 279, Essential oils Determination of relative density at 20 C Reference met

16、hod ISO 280, Essential oils Determination of refractive index ISO 592, Essential oils Determination of optical rotation ISO 1272, Essential oils Determination of phenols content ISO 11024-1, Essential oils General guidance on chromatographic profiles Part 1: Preparation of chromatographic profiles f

17、or presentation in standards ISO 11024-2, Essential oils General guidance on chromatographic profiles Part 2: Utilization of chromatographic profiles of samples of essential oils 1)Also commercially known as “Saint-Thomas bay”. 3 Terms and definitions For the purposes of this document, the following

18、 terms and definitions apply. 3.1 oil of bay essential oil obtained by steam distillation of the leaves of Pimenta racemosa (Mill.) J.W. Moore, of the Myrtaceae family. NOTE For information on the CAS number, see ISO/TR 21092. 4 Requirements 4.1 Appearance Clear mobile liquid. 4.2 Colour Dark brown.

19、 4.3 Odour Characteristic, spicy. 4.4 Flavour Spicy, hot. 4.5 Relative density at 20 C, 20 20 d Minimum: 0,943 Maximum: 0,984 4.6 Refractive index at 20 C Minimum: 1,505 Maximum: 1,517 4.7 Optical rotation at 20 C Between 0,5 and + 0,5. BSISO3045:20042 Since the product is highly coloured, it is str

20、ongly recommended to decolorize it with an appropriate bleach, excluding distillation, before determination of the optical rotation. 4.8 Content of phenols Minimum: 52 % (volume fraction) 4.9 Chromatographic profile Analysis of the essential oil shall be carried out by gas chromatography. In the chr

21、omatogram obtained, the representative and characteristic components shown in Table 1 shall be identified. The proportions of these components, indicated by the integrator, shall be as shown in Table 1. This constitutes the chromato- graphic profile of the essential oil. Table 1 Chromatographic prof

22、ile Component Minimum % Maximum % Myrcene 20,0 30,0 Limonene a1,0 4,0 Linalol 1,0 3,0 Methyl eugenol 0,1 2,0 Eugenol 42,0 56,0 Chavicol 8,0 13,0 NOTE The chromatographic profile is normative, contrary to typical chromatograms given for information in Annex A. aThis is considered to be completely D-l

23、imonene by independent chemical and physical analysis. 4.10 Flashpoint Information on the flashpoint is given in Annex B. 5 Sampling See ISO 212. Minimum volume of test sample: 25 ml. NOTE This volume allows each of the tests specified in this International Standard to be carried out at least once.

24、6 Test methods 6.1 Relative density at 20 C, 20 20 d See ISO 279. 6.2 Refractive index at 20 C See ISO 280. 6.3 Optical rotation at 20 C See ISO 592. 6.4 Content of phenols See ISO 1272. 6.5 Chromatographic profile See ISO 11024-1 and ISO 11024-2. 7 Packing, labelling, marking and storage See ISO/TR

25、 210 and ISO/TR 211. BSISO3045:2004 3Annex A (informative) Typical chromatograms of the analysis by gas chromatography of the essential oil of bay Pimenta racemosa (Mill.) J.W. Moore Peak identification 1 Myrcene 2 Limonene 3 Linalol 4 Chavicol 5 Eugenol 6 Methyl eugenol Operating conditions Column:

26、 silica capillary; length 20 m; internal diameter 100 m Stationary phase: methyl siloxane Film thickness: 0,4 m Oven temperature: isothermal at 50 C for 1 min, then temperature programming from 50 C to 220 C at a rate of 10 C/min, and isothermal at 220 C for 13 min Injector temperature: 250 C Detect

27、or temperature: 250 C Detector: flame ionization type Carrier gas: hydrogen Volume injected: 0,2 l Carrier gas flow rate: 0,3 ml/min Pressure: start at 220,63 kPa for 20 min, then 34,47 kPa/min up to 310,26 kPa, then 310,26 kPa for 20 min Figure A.1 Typical chromatogram taken on an apolar column BSI

28、SO3045:20044 Peak identification 1 Myrcene 2 Limonene 3 Linalol 4 Methyl eugenol 5 Eugenol 6 Chavicol Operating conditions Column: silica capillary; length 20 m; internal diameter 100 m Stationary phase: poly(ethylene glycol) 20 000 (Carbowax 20 M) Film thickness: 0,2 m Oven temperature: isothermal

29、at 50 C for 1 min, then temperature programming from 50 C to 220 C at a rate of 10 C/min Injector temperature: 250 C Detector temperature: 250 C Detector: flame ionization type Carrier gas: hydrogen Volume injected: 0,2 l Carrier gas flow rate: 0,3 ml/min Pressure programming: start at 220,63 kPa fo

30、r 20 min, then increase at 34,47 kPa/min up to 310,26 kPa, then 310,26 kPa for 20 min Figure A.2 Typical chromatogram taken on a polar column BSISO3045:2004 5Annex B (informative) Flashpoint B.1 General information For safety reasons, transport companies, insurance companies, and people in charge of

31、 safety services require information on the flashpoints of essential oils, which in most cases are flammable products. A comparative study on the relevant methods of analysis (see ISO/TR 11018) concluded that it was difficult to recommend a single apparatus for standardization purposes, given that:

32、there is wide variation in the chemical compo- sition of essential oils; the volume of the sample needed in certain requirements would be too costly for high- priced essential oils; as there are several different types of equipment which can be used for the determination, users cannot be expected to

33、 use one specified type only. Consequently, it was decided to give a mean value for the flashpoint in an informative annex to each International Standard, in order to meet the requirements of the interested parties. The equipment with which this value was obtained should be specified. For further in

34、formation, see ISO/TR 11018. B.2 Flashpoint of the essential oil of bay The mean value is + 64 C. NOTE Obtained with “Luchaire” equipment. BSISO3045:20046 Bibliography 1 ISO/TR 11018:1997, Essential oils General guidance on the determination of flashpoint 2 ISO/TR 21092: 2) , Essential oils Characte

35、rization 2)To be published. BSISO3045:2004blankBS ISO 3045:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level.

36、It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grate

37、ful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual upd

38、ating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email:

39、ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provi

40、des a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:

41、+44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8

42、996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI pub

43、lications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic,

44、 photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.