BS ISO 25297-2-2012 Optics and photonics Electronic exchange of optical data Mapping to the classes and properties defined in ISO 23584《光学与光子 光学数据的电子交换 对ISO 23584中定义的类别和性能的映射》.pdf

《BS ISO 25297-2-2012 Optics and photonics Electronic exchange of optical data Mapping to the classes and properties defined in ISO 23584《光学与光子 光学数据的电子交换 对ISO 23584中定义的类别和性能的映射》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 25297-2-2012 Optics and photonics Electronic exchange of optical data Mapping to the classes and properties defined in ISO 23584《光学与光子 光学数据的电子交换 对ISO 23584中定义的类别和性能的映射》.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS ISO 25297-2:2011Optics and photonics Electronic exchange of opticaldataPart 2: Mapping to the classes andproperties defined in ISO 23584BS ISO 25297-2:2011 BRITISH STANDARDNat

2、ional forewordThis British Standard is the UK implementation of ISO 25297-2:2011.The UK participation in its preparation was entrusted to TechnicalCommittee CPW/172/1, Optics and Photonics - FundamentalStandards.A list of organizations represented on this committee can beobtained on request to its s

3、ecretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012ISBN 978 0 580 67597 3ICS 37.020Compliance with a British Standard cannot confer immunity fromlegal obligations.Thi

4、s British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate T e x t a f f e c t e dBS ISO 25297-2:2011Reference numberISO 25297-2:2011(E)ISO 2011INTERNATIONAL STANDARD ISO25297-2First edition2011-12-15O

5、ptics and photonics Electronic exchange of optical data Part 2: Mapping to the classes and properties defined in ISO 23584 Optique et photonique Transfert lectronique des donnes optiques Partie 2: Mappage des classes et proprits definies dans lISO 23584 BS ISO 25297-2:2011ISO 25297-2:2011(E) COPYRIG

6、HT PROTECTED DOCUMENT ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

7、 ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2011 All rights reservedBS ISO 25297-2:2011ISO 25297-2:2011(E) ISO 2011 All r

8、ights reserved iiiContents Page Foreword iv 1 Scope 1 2 Normative references 1 3 Terms and definitions . 1 4 Mapping 1 4.1 General . 1 4.2 Mapping table 2 Annex A (informative) Class hierarchy . 22 Bibliography 23 BS ISO 25297-2:2011ISO 25297-2:2011(E) iv ISO 2011 All rights reservedForeword ISO (th

9、e International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committ

10、ee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechn

11、ical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member

12、bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying

13、any or all such patent rights. ISO 25297-2 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee SC 1, Fundamental standards. ISO 25297 consists of the following parts, under the general title Optics and photonics Electronic exchange of optical data: Part 1: NODIF inform

14、ation model Part 2: Mapping to the classes and properties defined in ISO 23584 BS ISO 25297-2:2011INTERNATIONAL STANDARD ISO 25297-2:2011(E) ISO 2011 All rights reserved 1Optics and photonics Electronic exchange of optical data Part 2: Mapping to the classes and properties defined in ISO 23584 1 Sco

15、pe This International Standard specifies the relationship between the terms used in ISO 25297-1 and the properties defined in ISO 23584-2, and provides the means to facilitate the use of both standards. NOTE This International Standard does not define all attributes of properties in ISO 23584-2. 2 N

16、ormative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 25297-1:2010, Optics and

17、photonics Electronic exchange of optical data Part 1: NODIF information model ISO 23584-1, Optics and photonics Specification of reference dictionary Part 1: General overview on organization and structure ISO 13584-42, Industrial automation systems and integration Parts library Part 42: Description

18、methodology: Methodology for structuring parts families 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 25297-1, ISO 23584-1 and ISO 13584-42 apply. 4 Mapping 4.1 General The terms of the application objects and their attributes in NODIF are used as

19、the preferred names in the reference dictionary. Underscores used in the terms in NODIF are omitted in the reference dictionary. NOTE The reference dictionary ID numbers given for the keywords will be filled once they are registered in the ISO/TC 172 reference dictionary database, which is under con

20、struction. BS ISO 25297-2:2011ISO 25297-2:2011(E) 2 ISO 2011 All rights reserved4.2 Mapping table Table 1 and Table 2 show the relationship between keywords in NODIF and the classes and properties in the ISO/TC 172 reference dictionary. Class hierarchy is depicted in Annex A for reference. BS ISO 25

21、297-2:2011ISO 25297-2:2011(E) Table 1 Mapping of the terms ofclasses in NODIF to the reference dictionaryNODIFkeywordHierarchy Super classPreferred nameDefinitionNoteReference dictionaryID number apertureApplication classISO TC172SC1/NODIFapertureapplication object to describe apertureof optical sys

22、tem4.3.25.6, 4.3.26.8 aperturein NODIFAssembly_tolerance Application classISO TC172SC1/NODIFassemblytolerance application object to specifyassembly tolerance 4.3.18 Assembly_tolerance in NODIFDiffractive_surface_description Application classISO TC172SC1/NODIFdiffractive surface description applicati

23、on object to describe diffractive optical surface 4.3.12 Diffractive_surface_description inNODIFAAA017-001Dimensional_tolerance Application classISO TC172SC1/NODIFdimensional tolerance application object to specifytolerance for dimensions of optical part 4.3.17 Dimensional_tolerance in NODIFMaterial

24、_property Application classISO TC172SC1/NODIFmaterial propertyapplication object to specifymaterial 4.3.36 Material_propertyin NODIF Optical_design_formulation Application classISO TC172SC1/NODIFoptical design formulation application object to collect information relevant to optical design 4.3.5 Opt

25、ical_design_formulation in NODIFOptical_evaluation Application classISO TC172SC1/NODIFoptical evaluation application object to describe conditions and results of optical evaluations 4.3.23 Optical_evaluation in NODIFOptical_part_view_designatorApplication classISO TC172SC1/NODIFoptical part viewdesi

26、gnatorapplication object to link information on optical systems/parts and theobject “design discipline product definition” in ISO 10303-2034.3.2 Optical_part_view_designator in NODIFOptical_process_specification Application classISO TC172SC1/NODIFoptical process specification application object to d

27、escribe machining process 4.3.15 Optical_process_specification in NODIFOptical_specification Application classISO TC172SC1/NODIFoptical specification application object to contain various specifications 4.3.13 Optical_specification in NODIFOptical_system_specification Application classISO TC172SC1/N

28、ODIFoptical system specification application object to contain specifications of optical system4.3.4 Optical_system_specification in NODIFOptical_tolerance Application classISO TC172SC1/NODIFoptical tolerance application object to describe optical tolerance 4.3.16 Optical_tolerance in NODIF Other_op

29、tical_evaluation Application classISO TC172SC1/NODIFother optical evaluation application object to describe optical evaluation based on external definition 4.3.31 Other_optical_evaluation in NODIFparaxial_ray_tracing Application classISO TC172SC1/NODIFparaxial ray tracing application object to descr

30、ibe paraxial raytracing results 4.3.24.6 paraxial_ray_tracing in NODIF3 ISO 2011 All rights reserved BS ISO 25297-2:2011ISO 25297-2:2011(E) Table 1 (continued)NODIFkeywordHierarchy Super classPreferred nameDefinitionNoteReference dictionaryID number ray_tracing Application classISO TC172SC1/NODIFray

31、tracing application object to describe real raytracing results 4.3.25.10 ray_tracing in NODIFSpecification_distinctionApplication classISO TC172SC1/NODIFspecification distinctionapplication object to indicate type of optical design specification; officialspecification requirements of optical system

32、ordesignrequirements foroptical system4.3.3 Specification_distinction in NODIFwavelengthApplication classISO TC172SC1/NODIFwavelengthapplication object to specifywavelength value or spectral line 4.3.14.5.2,4.3.24.2, 4.3.25.5, 4.3.14.5.2, 4.3.28.2 wavelength in NODIFZoneApplication classISO TC172SC1

33、/NODIFzone application object to specifyopticallyeffective area 4.3.19 Zone in NODIFzone_formApplication classISO TC172SC1/NODIFzone formapplication object to describe opticallyeffective elementaryarea4.3.19.2 zone_form in NODIFthree-dimensional_real_vector Application classISO TC172SC1/NODIFthree-d

34、imensional real vector data typeof component consistingof three elements; vector componentor direction cosineFigure A.6, Figure A.20 three-dimensional_real_vector in NODIF other_tolerance Application classdimensional tolerance other toleranceapplication object to describe tolerance for optical part

35、based onexternal definition 4.3.17.5 other_tolerance in NODIF change_position Application classmulti-configuration change position application object to specifyarrangement of dynamic blocks in optical system4.3.8.13 change_position in NODIFBlock_description Application classoptical design formulatio

36、n block descriptionapplication object to describe moving range of optical block 4.3.6 Block_description in NODIFCemented_partApplication classoptical design formulation cemented partapplication object to indicate cemented optical part4.3.7 Cemented_part in NODIFOptical_path_definitionApplication cla

37、ssoptical design formulation optical path definition application object to specifydata necessaryto trace raysthrough optical system4.3.8 Optical_path_definition in NODIFGhost_image_evaluation Application classoptical evaluation ghost image evaluation application object to describe ghost image evalua

38、tion 4.3.29 Ghost_image_evaluation in NODIFIlluminance_distribution _evaluation Application classoptical evaluation illuminance distribution evaluation application object to describe illuminance distribution evaluation 4.3.27 Illuminance_distribution_evaluationin NODIF4 ISO 2011 All rights reservedB

39、S ISO 25297-2:2011ISO 25297-2:2011(E) Table 1 (continued)NODIFkeywordHierarchy Super classPreferred nameDefinitionNoteReference dictionaryID number Optical_sensitivity_evaluation Application classoptical evaluation optical sensitivity evaluation application object to describe optical sensitivityeval

40、uation 4.3.30 Optical_sensitivity_evaluation in NODIFOTF_evaluation Application classoptical evaluation OTF evaluation application object to specifyoptical evaluation based on OTF4.3.26 OTF_evaluation in NODIFParaxial_evaluation Application classoptical evaluation paraxial evaluation application obj

41、ect to describe optical evaluation byparaxial raytracing4.3.24 Paraxial_evaluation in NODIFRay_tracing_evaluation Application classoptical evaluation raytracing evaluation application object to describe optical evaluation byrealraytracing 4.3.25 Ray_tracing_evaluation in NODIFSpectral_characteristic

42、s Application classoptical evaluation spectral characteristics application object to describe spectral characteristics 4.3.28 Spectral_characteristics inNODIFsurface_imperfection_evaluation Application classoptical evaluation surface imperfection evaluation application object to describe surface imp

43、erfection evaluation 4.3.31 surface_imperfection_evaluation in NODIFveiling_glare_index_evaluationApplication classoptical evaluation veiling glare index evaluation application object to describe veiling glare index evaluation 4.3.32 veiling_glare_index_evaluation in NODIFinternal_transmittance Appl

44、ication classoptical material specification internal transmittance application object to indicate internal transmittance of optical material 4.3.14.8 internal_transmittance in NODIFrefractive_index_information Application classoptical material specification refractive index information application o

45、bject to describe refractive index values and relevant wavelength values of material 4.3.14.5 refractive_index_information in NODIFmulti-configuration Application classoptical path definition multi-configuration application object to specifyinformation on multiple configurations in optical system 4.

46、3.8.11 multi-configuration in NODIFnon-sequential_path_rangeApplication classoptical path definition non-sequential path rangeapplication object to specifyrangeof non-sequential path 4.3.8.6 non-sequential_path_range in NODIFSurface_interfaceApplication classoptical path definition surface interface

47、application object to specifydata for raytracing at each interface 4.3.9 Surface_interface in NODIFCoating_specification Application classoptical specification coating specification application object to describe optical coating 4.3.20 Coating_specification in NODIFOptical_material_specification App

48、lication classoptical specification optical material specification application object to contain specification of optical material 4.3.14 Optical_material_specification in NODIF5 ISO 2011 All rights reserved BS ISO 25297-2:2011ISO 25297-2:2011(E) Table 1 (concluded)NODIFkeywordHierarchy Super classP

49、referred nameDefinitionNoteReference dictionaryID number Protective_surface_treatmentApplication classoptical specification protective surface treatmentapplication object to describe treatment process onto optical surface; black painting to prevent straylight or protect optical part 4.3.21 Protective_surface_treatment in NODIFUser-defined_specificationApplication classoptical specification user-defined specification application object to specifyitem based on external definition