BS ISO 24631-3-2017 Radiofrequency identification of animals Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785《动物射频识别 符合ISO 11784和ISO 11785的无线射.pdf

《BS ISO 24631-3-2017 Radiofrequency identification of animals Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785《动物射频识别 符合ISO 11784和ISO 11785的无线射.pdf》由会员分享，可在线阅读，更多相关《BS ISO 24631-3-2017 Radiofrequency identification of animals Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785《动物射频识别 符合ISO 11784和ISO 11785的无线射.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、Radiofrequency identification of animalsPart 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785BS ISO 246313:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 ISO 2017Radiofrequency identification of animals Part 3: Evaluatio

2、n of performance of RFID transponders conforming with ISO 11784 and ISO 11785Identification des animaux par radiofrquence Partie 3: valuation de la performance des transpondeurs RFID conformes lISO 11784 et lISO 11785INTERNATIONAL STANDARDISO24631-3Second edition2017-09Reference numberISO 24631-3:20

3、17(E)National forewordThis British Standard is the UK implementation of ISO 246313:2017. It supersedes BS ISO 246313:2009, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee AGE/6/1, Radio Frequency ID for Animals.A list of organizations represented on th

4、is committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 81933 9ICS

5、 65.040.99Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS IS

6、O 246313:2017 ISO 2017Radiofrequency identification of animals Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785Identification des animaux par radiofrquence Partie 3: valuation de la performance des transpondeurs RFID conformes lISO 11784 et lISO 11785INT

7、ERNATIONAL STANDARDISO24631-3Second edition2017-09Reference numberISO 24631-3:2017(E)BS ISO 246313:2017ISO 24631-3:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be

8、reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requ

9、ester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 246313:2017ISO 24631-3:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights re

10、served. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either

11、ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO 24631-3:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative refere

12、nces 13 Terms and definitions . 14 Conformance . 35 Abbreviated terms 36 Application . 47 Test procedures . 57.1 General . 57.2 Helmholtz configuration . 57.2.1 Transponder parameter test set-up 57.2.2 Field strength calculation . 57.2.3 Helmholtz transmitting antenna (HTA) coils 57.2.4 Helmholtz se

13、nsing coils (HSC) and sensing coils (SC) 67.2.5 Positioning HSC and SC in relation to HTA 87.2.6 Matching network (MN) 87.2.7 Matching network (MN) 97.2.8 Compensation network (CN) 97.3 Test apparatus 107.4 Test setups for measuring the modulation amplitude .117.4.1 FDX-B transponders .117.4.2 HDX t

14、ransponders .127.5 Test conditions . 127.6 Tests . 127.6.1 General. 127.6.2 Transponder orientation . 127.6.3 Constant magnetic field nulling . 137.6.4 Minimal activating magnetic field strength in FDX-B mode 147.6.5 Minimal activating magnetic field strength in HDX mode 157.6.6 Modulation amplitude

15、 in FDX-B mode .157.6.7 Modulation amplitude in HDX mode .177.6.8 Bit length stability in FDX-B mode 197.6.9 Frequency stability in HDX mode .22Annex A (normative) Test application form (ISO 24631-3) 26Annex B (informative) Current source transmitter (ISO 24631-3)27Bibliography .28 ISO 2017 All righ

16、ts reserved iiiContents PageBS ISO 246313:2017ISO 24631-3:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical co

17、mmittees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with th

18、e International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for t

19、he different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. I

20、SO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this docu

21、ment is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Or

22、ganization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 19, Agricultural electronics.This second edition

23、 cancels and replaces the first edition (ISO 24631-3:2009), which has been technically revised.The main changes compared to the previous edition are as follows: quality of the figures has been improved (see Clause 7).A list of all parts in the ISO 24631 series can be found on the ISO website.iv ISO

24、2017 All rights reservedBS ISO 246313:2017ISO 24631-3:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical commit

25、tees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the In

26、ternational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the d

27、ifferent types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO s

28、hall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document

29、 is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organi

30、zation (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 19, Agricultural electronics.This second edition can

31、cels and replaces the first edition (ISO 24631-3:2009), which has been technically revised.The main changes compared to the previous edition are as follows: quality of the figures has been improved (see Clause 7).A list of all parts in the ISO 24631 series can be found on the ISO website.iv ISO 2017

32、 All rights reserved ISO 24631-3:2017(E)IntroductionISO has appointed a registration authority (RA) competent to register manufacturer codes used in the radiofrequency identification (RFID) of animals in accordance with ISO 11784 and ISO 11785.The registration authority for ISO 11784 and ISO 11785 c

33、an found under http:/www.iso.org/iso/home/standards_development/list_of_iso_technical_committees/maintenance_agencies.htm.This document deals with the performance of RFID transponders, of which the main types used for animal identification are injectable transponders, electronic ear tag transponders

34、, electronic ruminal bolus transponders, leg tag transponders, and tag attachments.This document permits the characterization of the two RFID communication paths: the energy transfer from transceiver to transponder and the data transfer from transponder to transceiver. This characterization can be o

35、btained from the results of two measurements: the first determining the minimal activating magnetic field strength needed for transmitting the information and the second the transponder modulation amplitude. Both measurements use a reference measurement antenna configuration under conditions allowin

36、g the absolute values to be obtained for comparison of data between the tested transponders. Additional measurements that contribute to the performance assessment of the transponders are the bit length stability in the case of FDX-B transponders and the frequency stability in the case of HDX transpo

37、nders. These parameters can be measured using the same measurement antenna configuration. ISO 2017 All rights reserved vBS ISO 246313:2017Radiofrequency identification of animals Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 117851 ScopeThis document provid

38、es the means of evaluating the performance of ISO 11784- and ISO 11785-conformant radiofrequency identification (RFID) transponders used in the individual identification of animals.The test procedures specified in this document are recognized by the Federation of European Companion Animals Veterinar

39、y Association (FECAVA) and World Small Animal Veterinarian Association (WSAVA) and as such can be applied also to companion animals.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For

40、 dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 11784, Radio frequency identification of animals Code structureISO 11785:1996, Radio frequency identification of animals Technical conceptIS

41、O 24631-1, Radiofrequency identification of animals Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code)3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.ISO and IEC m

42、aintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp3.1accreditationthird-party attestation related to a conformity assessment body conveying

43、 formal demonstration of its competence to carry out specific conformity assessment tasksSOURCE: ISO/IEC 17000:2004, 5.63.2activation fieldelectromagnetic field with a frequency of 134,2 kHz3.3bit length stabilitystability of an FDX-B transponder (3.18) expressed by the standard deviation of the dur

44、ation of one-bit informationINTERNATIONAL STANDARD ISO 24631-3:2017(E) ISO 2017 All rights reserved 1BS ISO 246313:2017Radiofrequency identification of animals Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 117851 ScopeThis document provides the means of eva

45、luating the performance of ISO 11784- and ISO 11785-conformant radiofrequency identification (RFID) transponders used in the individual identification of animals.The test procedures specified in this document are recognized by the Federation of European Companion Animals Veterinary Association (FECA

46、VA) and World Small Animal Veterinarian Association (WSAVA) and as such can be applied also to companion animals.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references,

47、only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 11784, Radio frequency identification of animals Code structureISO 11785:1996, Radio frequency identification of animals Technical conceptISO 24631-1, Radiofre

48、quency identification of animals Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code)3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.ISO and IEC maintain terminologi

49、cal databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp3.1accreditationthird-party attestation related to a conformity assessment body conveying formal demonstration of its competence to carry out specific conformity assessment tasksSOURCE: ISO/IEC 17000:2004, 5.63.2activation fieldelectromagnetic field with a frequency of 134,2 kHz3.3bit length stability