BS ISO 23584-2-2012 Optics and photonics Specification of reference dictionary Classes- and properties- definitions《光学和光子学 参考字典规范 等级和性能定义》.pdf

《BS ISO 23584-2-2012 Optics and photonics Specification of reference dictionary Classes- and properties- definitions《光学和光子学 参考字典规范 等级和性能定义》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 23584-2-2012 Optics and photonics Specification of reference dictionary Classes- and properties- definitions《光学和光子学 参考字典规范 等级和性能定义》.pdf（114页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS ISO 23584-2:2012Optics and photonics Specification of referencedictionaryPart 2: Classes and properties definitionsBS ISO 23584-2:2012 BRITISH STANDARDNational forewordThis Br

2、itish Standard is the UK implementation of ISO 23584-2:2012.The UK participation in its preparation was entrusted to TechnicalCommittee CPW/172, Optics and Photonics.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to

3、include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 61768 3ICS 37.020Compliance with a British Standard cannot confer immunity fromlegal obligations.This Brit

4、ish Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2012.Amendments issued since publicationDate Text affectedBS ISO 23584-2:2012 ISO 2012Optics and photonics Specification of reference dictionary Part 2: Classes and properties definitionsOptique

5、 et photonique Spcification dun dictionnaire de rfrence Partie 2: Dfinitions des classes et des propritsINTERNATIONAL STANDARDISO23584-2First edition2012-08-15Reference numberISO 23584-2:2012(E)BS ISO 23584-2:2012ISO 23584-2:2012(E)ii ISO 2012 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2012

6、All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the countr

7、y of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO 23584-2:2012ISO 23584-2:2012(E) ISO 2012 All rights reserved iiiContents PageForeword . v1 Scope 12 Normative refere

8、nces . 13 Terms and definitions . 14 Explanatory notes . 15 Definition classes 35.1 ISOTC172-AAA005-001: 01 generalities, terminology, standardization, documentation . 35.2 ISOTC172-AAA018-001: quantities . 45.3 ISOTC172-AAA008-001: quantities of light and related electromagnetic radiations 55.4 ISO

9、TC172-AAA012-001: 07 mathematics, natural sciences 65.5 ISOTC172-AAA019-001: 11 health care technology . 75.6 ISOTC172-AAA001-001: 13 environment, health protection, safety 85.7 ISOTC172-AAA009-001: 17 metrology and measurement 95.8 ISOTC172-AAA015-001: 21 mechanical systems and components for gener

10、al use .105.9 ISOTC172-AAA028-001: 31 electronics . 115.10 ISOTC172-AAA003-001: 37 image technology 125.11 ISOTC172-AAA013-001: functional coating .135.12 ISOTC172-AAA011-001: optical element .145.13 ISOTC172-AAA002-001: optical material .155.14 ISOTC172-AAA010-001: optical glass 165.15 ISOTC172-AAA

11、014-001: optical system 175.16 ISOTC172-AAA007-001: optically used surface 185.17 ISOTC172-AAA017-001: diffractive surface .195.18 ISOTC172-AAA006-001: dioptric surface 206 Properties 216.1 ISOTC172-AAA036-001: Abbe number referred to d-line .216.2 ISOTC172-AAA055-001: Abbe number referred to e-line

12、 226.3 ISOTC172-AAA075-001: acid resistance .236.4 ISOTC172-AAA069-001: acid resistance class 246.5 ISOTC172-AAA074-001: alkali resistance .266.6 ISOTC172-AAA070-001: alkali resistance class 276.7 ISOTC172-AAA057-001: categories of optics 296.8 ISOTC172-AAA053-001: coefficient B1 of Sellmeier-equati

13、on 316.9 ISOTC172-AAA054-001: coefficient B2 of Sellmeier-equation 326.10 ISOTC172-AAA035-001: coefficient B3 of Sellmeier-equation 336.11 ISOTC172-AAA056-001: coefficient C1 of Sellmeier-equation 346.12 ISOTC172-AAA038-001: coefficient C2 of Sellmeier-equation 356.13 ISOTC172-AAA059-001: coefficien

14、t C3 of Sellmeier-equation 366.14 ISOTC172-AAA085-001: coefficient of mean linear thermal expansion (30C;+70C) 376.15 ISOTC172-AAA077-001: colour code .386.16 ISOTC172-AAA033-001: direction of curvature of an optical surface .396.17 ISOTC172-AAA072-001: identification of visible surface changes 406.

15、18 ISOTC172-AAA076-001: internal transmittance 426.19 ISOTC172-AAA078-001: Knoop hardness per ISO 9385:1990 .436.20 ISOTC172-AAA046-001: manipulation of light .446.21 ISOTC172-AAA029-001: manufacturer of optical glass 456.22 ISOTC172-AAA088-001: material imperfection .466.23 ISOTC172-AAA037-001: mat

16、erial imperfection in terms of bubbles and inclusions 476.24 ISOTC172-AAA060-001: material imperfection in terms of stress birefringence .486.25 ISOTC172-AAA042-001: material imperfections in terms of striae 496.26 ISOTC172-AAA067-001: material imperfections of refractive index 516.27 ISOTC172-AAA05

17、0-001: mathematical description of surface .536.28 ISOTC172-AAA058-001: n() as per Sellmeier-equation .54BS ISO 23584-2:2012ISO 23584-2:2012(E)iv ISO 2012 All rights reserved6.29 ISOTC172-AAA048-001: name of an optical coating .566.30 ISOTC172-AAA066-001: glass type 576.31 ISOTC172-AAA043-001: optic

18、ally effective diameter .586.32 ISOTC172-AAA040-001: partial dispersion .596.33 ISOTC172-AAA039-001: principal dispersion (nF - nC) 606.34 ISOTC172-AAA062-001: principal dispersion (nF - nC) 616.35 ISOTC172-AAA073-001: phosphate resistance .626.36 ISOTC172-AAA071-001: phosphate resistance class 636.

19、37 ISOTC172-AAA030-001: primary function of the coating .656.38 ISOTC172-AAA061-001: refractive index 676.39 ISOTC172-AAA068-001: refractive index at spectral wavelength 686.40 ISOTC172-AAA052-001: scope according to ICS .696.41 ISOTC172-AAA049-001: surface adding characteristic 716.42 ISOTC172-AAA0

20、44-001: surface form deviation - irregularity .726.43 ISOTC172-AAA063-001: surface form deviation - rotationally invariant irregularity 736.44 ISOTC172-AAA065-001: surface form deviation - sagitta deviation 746.45 ISOTC172-AAA087-001: surface imperfections 756.46 ISOTC172-AAA041-001: surface imperfe

21、ctions - coating blemishes 766.47 ISOTC172-AAA034-001: surface imperfections - edge chips 776.48 ISOTC172-AAA051-001: surface imperfections - long scratches .786.49 ISOTC172-AAA064-001: surface imperfections-general surface imperfection 796.50 ISOTC172-AAA084-001: temperature coefficient nabs/T of r

22、efractive index 806.51 ISOTC172-AAA083-001: temperature coefficient nrel/T of refractive index 816.52 ISOTC172-AAA082-001: temperature interval .826.53 ISOTC172-AAA081-001: annealing point 846.54 ISOTC172-AAA080-001: softening point .856.55 ISOTC172-AAA086-001: thickness of a piece of material .866.

23、56 ISOTC172-AAA032-001: tilt angle of a spherical surface .876.57 ISOTC172-AAA079-001: transformation temperature .886.58 ISOTC172-AAA047-001: wavelength 896.59 ISOTC172-AAA031-001: wavelength for special spectral lines 907 Application classes .947.1 ISOTC172-AAA020-001: ISOTC172 optics and photonic

24、s 947.2 ISOTC172-AAA021-001: ISOTC172SC01 fundamental standards 957.3 ISOTC172-AAA022-001: ISOTC172SC03 optical materials and components .967.4 ISOTC172-AAA023-001: ISOTC172SC04 telescopic systems .977.5 ISOTC172-AAA024-001: ISOTC172SC05 microscopes and endoscopes .987.6 ISOTC172-AAA025-001: ISOTC17

25、2SC06 geodetic and surveying instruments .997.7 ISOTC172-AAA026-001: ISOTC172SC07 ophthalmic optics and instruments .1007.8 ISOTC172-AAA027-001: ISOTC172SC09 electro-optical systems .101Bibliography .102BS ISO 23584-2:2012ISO 23584-2:2012(E)ForewordISO (the International Organization for Standardiza

26、tion) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be

27、represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards

28、 are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Internati

29、onal Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 23584-2 was p

30、repared by Technical Committee ISO/TC 172, Optics and photonics.ISO 23584 consists of the following parts, under the general title Optics and photonics Specification of reference dictionary: Part 1: General overview on organization and structure Part 2: Classes and properties definitions ISO 2012 Al

31、l rights reserved vBS ISO 23584-2:2012BS ISO 23584-2:2012Optics and photonics Specification of reference dictionary Part 2: Classes and properties definitions1 ScopeThis part of ISO 23584, on the basis of the rules set forth in ISO 13584-42, ISO/IEC Guide 77-2 and IEC 61360-1, specifies a reference

32、dictionary of standardized product properties for the area of optics and photonics.The properties are determined on the basis of standardized attributes. To ensure optimum unambiguity, the standardized properties are classified into definition classes forming a so-called standardized “reference hier

33、archy”.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 13584-42, Industr

34、ial automation systems and integration Parts library Part 42: Description methodology: Methodology for structuring parts familiesISO/IEC Guide 77-2, Guide for specification of product properties and classes Part 2: Technical principles and guidanceIEC 61360-1, Standard data elements types with assoc

35、iated classification scheme for electric items Part 1: Definitions Principles and methods3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 13584-42, ISO/IEC Guide 77-2 and IEC 61360-1 apply.NOTE Some basic definitions and principles of key importance fo

36、r the understanding of this part of ISO 23584 are provided in ISO 23584-1:2009, Annex A for information.4 Explanatory notesEach property is defined in a particular definition class, which defines the domain of all properties specified therein. Once defined (in their definition class) the properties

37、can be referenced, i.e. used, in other classes, e. g. in (standardized) application classes or immediately in a users system. The entirety of definition classes makes up the ISO/TC 172 reference hierarchy.The following definition classes form part of the reference dictionary for optics and photonics

38、:+- 01 generalities, terminology, standardization, documentation+- quantities+- quantities of light and related electromagnetic radiations+- 07 mathematics, natural sciences+- 11 health care technologyINTERNATIONAL STANDARD ISO 23584-2:2012(E) ISO 2012 All rights reserved 1BS ISO 23584-2:2012ISO 235

39、84-2:2012(E)+- 13 environment, health protection, safety+- 17 metrology and measurement+- 21 mechanical systems and components for general use+- 31 electronics+- 37 image technology+- functional coating+- optical element+- optical material+- optical glass+- optical system+- optically used surface+-

40、diffractive surface+- dioptric surfaceThe attribute information for these definition classes is given in Clause 5. The attribute information for their associated properties is specified in Clause 6. Both can be viewed immediately in the ISO/TC 172 database.NOTE 1 The above structure of reference hie

41、rarchy provides the starting point included in this part of ISO 23584. It is not yet complete and will be expanded in the electronic version as more properties and their respective definition classes are defined.In addition, a number of root application classes, one for ISO/TC 172 and one for each o

42、f the subcommittees of ISO/TC 172, have been included in order to provide the workspace for the committees to create their application classes, as required. These root application classes are given in Clause 7. They can also be viewed immediately in the ISO/TC 172 database.NOTE 2 The reader should c

43、arefully study ISO 23584-1 regarding definition classes, which is a subset of the specification of ISO 13584-42.2 ISO 2012 All rights reservedBS ISO 23584-2:2012ISO 23584-2:2012(E)5 Definition classes5.1 ISOTC172-AAA005-001: 01 generalities, terminology, standardization, documentationHierarchy Defin

44、ition classesIdentifier Information supplier*-Code*-Version*-Revision*ISOTC172-AAA005-001.023Preferred name* 01 generalities, terminology, standardization, documentationShort name terminologySynonymous name Definition* ICS class of generalities, terminology, standardization and documentationSource d

45、ocument of definition Note Remark The class and its definition are based on the classification of ICS 5:2002.List of defined properties ISOTC172-AAA052-001Figure Classification to ICS* 01.000Its superclass ISOTC172-AAA004-001Preferred name of superclass Definition classesKeyword Applicable propertie

46、s ISOTC172-AAA052-001Applicable types Subclass selectors Class selector values Status 60.60 releasedDate of original definition* 2012-08-15Date of current version* 2012-08-15Date of current revision* 2012-08-15ownerTCSC* TC172liaisonTCSC ebXML URI ISO 2012 All rights reserved 3BS ISO 23584-2:2012ISO

47、 23584-2:2012(E)5.2 ISOTC172-AAA018-001: quantitiesHierarchy Definition classesIdentifier Information supplier*-Code*-Version*-Revision*ISOTC172-AAA018-001.015Preferred name* quantitiesShort name quantitiesSynonymous name Definition* classification and description of quantitiesSource document of def

48、inition Note Remark List of defined properties ISOTC172-AAA052-001Figure Classification to ICS* 01.060Its superclass ISOTC172-AAA005-001Preferred name of superclass 01 generalities, terminology, standardization, documentationKeyword dimensionquantityApplicable properties ISOTC172-AAA052-001Applicabl

49、e types Subclass selectors Class selector values Status 60.60 releasedDate of original definition* 2012-08-15Date of current version* 2012-08-15Date of current revision* 2012-08-15ownerTCSC* TC172liaisonTCSC ebXML URI 4 ISO 2012 All rights reservedBS ISO 23584-2:2012ISO 23584-2:2012(E)5.3 ISOTC172-AAA008-001: quantities of light and related electromagnetic radiationsHierarchy Definition classesIdentifier Information supplier*-Code*-Version*-Revision*ISOTC172-A