BS ISO 23584-1-2009 Optics and photonics - Specification of reference dictionary - General overview on organization and structure《光学和光电子学 基准词典规范 组织和结构一般概述》.pdf

《BS ISO 23584-1-2009 Optics and photonics - Specification of reference dictionary - General overview on organization and structure《光学和光电子学 基准词典规范 组织和结构一般概述》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 23584-1-2009 Optics and photonics - Specification of reference dictionary - General overview on organization and structure《光学和光电子学 基准词典规范 组织和结构一般概述》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO23584-1:2009ICS 37.020NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDOptics and photonics Specification ofreference dictionaryPart 1: General overview onorganization and structureThis British Standardwas published under theauthority of the StandardsPolicy

2、 and StrategyCommittee on 30 June 2009 BSI 2009ISBN 978 0 580 59140 2Amendments/corrigenda issued since publicationDate CommentsBS ISO 23584-1:2009National forewordThis British Standard is the UK implementation of ISO 23584-1:2009.The UK participation in its preparation was entrusted to TechnicalCom

3、mittee CPW/172/1, Fundamental standards.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British

4、 Standard cannot confer immunityfrom legal obligations.BS ISO 23584-1:2009Reference numberISO 23584-1:2009(E)ISO 2009INTERNATIONAL STANDARD ISO23584-1First edition2009-05-15Optics and photonics Specification of reference dictionary Part 1: General overview on organization and structure Optique et ph

5、otonique Spcification dun dictionnaire de rfrence Partie 1: Aperu gnral sur lorganisation et la structure BS ISO 23584-1:2009ISO 23584-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not b

6、e edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe i

7、s a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO memb

8、er bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or b

9、y any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-m

10、ail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2009 All rights reservedBS ISO 23584-1:2009ISO 23584-1:2009(E) ISO 2009 All rights reserved iiiContents Page Foreword iv Introduction v 1 Scope 1 2 Normative references 1 3 Terms and definitions .1 4 Principles of specification 2 5

11、 ISO/TC 172 database .5 6 Basic structure of the reference dictionary for optics and photonics .7 Annex A (informative) Basic definitions and underlying principles 10 Bibliography 13 BS ISO 23584-1:2009ISO 23584-1:2009(E) iv ISO 2009 All rights reservedForeword ISO (the International Organization fo

12、r Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the

13、 right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Internati

14、onal Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication

15、as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

16、ISO 23584-1 was prepared by Technical Committee ISO/TC 172, Optics and photonics. ISO 23584 consists of the following parts, under the general title Optics and photonics Specification of reference dictionary: Part 1: General overview on organization and structure Part 2: Classes and properties defin

17、itions BS ISO 23584-1:2009ISO 23584-1:2009(E) ISO 2009 All rights reserved vIntroduction Modern business operations known collectively as e-Business and including e-Marketplaces, e-Product catalogues and Lifecycle Management are characterized by: 1) Complex structures of the product lifecycle In eac

18、h step of the product lifecycle (ranging from the first idea through development, manufacture, distribution, use and disposal of the product) information from another step or other steps is required, moreover, new additional information in generated. Numerous parties and/or processes are involved in

19、 or form part of the product lifecycle. Hence information needs to be transferred to and/or exchanged between those parties and processes, across company internal interfaces and across interfaces to external business partners (such as other manufacturers, suppliers and customers). To ensure successf

20、ul handling of these business operations it is essential that the communication between parties and processes involved be independent from individual agreements on data and that the data, once created, be readily usable by other parties and in other processes without a need for conversion mechanisms

21、. 2) Availability of new electronic media Suppliers make efforts to provide such media and (potential) buyers are bombarded with this information, whilst missing transparency. To take advantage of the economic potential of these new media, product information provided by various suppliers must be cl

22、ear and unambiguous (inter-comparable) for a potential buyer. The requirement arising from both of these aspects is that the description of products and processes be: uniformly consistent and unambiguous; neutral (neither company-specific nor software-specific nor product-specific); available in ele

23、ctronic form for ready use without conversion. This is generally true for any business area. For the business area of optics and photonics, as regards optical data, the situation that led to the decision to prepare ISO 23584 was: a) available ISO Standards such as the ISO 10110 series, describe the

24、preparation of drawings and provide verbal definition of properties, but do not provide sufficient detail of information required for an unambiguous data exchange; b) programs (i.e. software, either commercially available or custom-made) used in different areas of a single company or amongst busines

25、s partners (e.g. Code V, Zemax, AutoCAD, HiCAD, MS Excel, SAP, etc.) use different interfaces and different internal data representation; any attempt to exchange data between them requires multi-directional conversion mechanisms or is associated with a risk of introducing errors or simply is impossi

26、ble; c) a consistent standardized terminology over the entire optics area does not exist. On the basis of standardized and electronically available properties, data exchange between, and immediate use of transmitted data in, the programs (software) used in various departments or branches of one comp

27、any BS ISO 23584-1:2009ISO 23584-1:2009(E) vi ISO 2009 All rights reservedor at various business partners can be implemented. Use of standardized properties increases process comprehensiveness at companies and permits closer IT-based links between customers and suppliers in the areas of development

28、and supply. This in turn leads to cost savings by way of cuts in the number of required parts and shorter product-development time frames. Though limited to the field of optics and photonics, the reference dictionary must include all relevant properties required for the full description of optical p

29、roducts and processes. Therefore, in addition to the properties that are peculiar to the field of optics and photonics, the reference dictionary also includes, be it by specification or be it by reference from other dictionaries, properties being of universal nature rather than specific to “optics a

30、nd photonics”, e.g. quantities and units or fundamental physical entities, and the required properties from other technical fields, e.g. mechanical components such as mountings for optical elements, if they are not defined elsewhere (i.e. in another PLIB standard) and so cannot be referenced. In the

31、 interests of utmost effectiveness the reference dictionary and its entire content is made available in electronic form, ready for import into and use in a users application system. NOTE Ideally, the reference dictionary and its content will be available in the form of an online database. It is ackn

32、owledged, however, that the provision of ISO properties in an online database is a new approach in ISO and that no suitable ISO database is currently available to provide the content and to allow export and subsequent import into the application system of the user. Therefore, this part of ISO 23584

33、is made available in the conventional form, but is supplemented by the relevant data in processable form on CD-Rom or as a download. BS ISO 23584-1:2009INTERNATIONAL STANDARD ISO 23584-1:2009(E) ISO 2009 All rights reserved 1Optics and photonics Specification of reference dictionary Part 1: General

34、overview on organization and structure 1 Scope This part of ISO 23584 provides the basis for the preparation of a reference dictionary of standardized product properties for the area of optics and photonics, and for the provision of this reference dictionary and its entire contents in electronic for

35、m. This part of ISO 23584, on the basis of the rules set forth in ISO 13584-42, IEC 61360-1 and in the ISO/IEC Guide 77-2 for specification of product properties and families, specifies a reference dictionary of standardized product properties for the area of optics and photonics. The properties are

36、 determined on the basis of standardized attributes. To ensure optimum unambiguity the standardized properties are classified into definition classes forming a so-called standardized “reference hierarchy”. 2 Normative references The following referenced documents are indispensable for the applicatio

37、n of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 31 (all parts), Quantities and units ISO 13584-42, Industrial automation systems and integration Parts library Part

38、42: Description methodo-logy: Methodology for structuring part families ISO 23584-2, Optics and photonics Specification of reference dictionary Part 2: Classes and properties definitions IEC 61360-1, Standard data element types with associated classification scheme for electric components Part 1: De

39、finitions Principles and methods ISO/IEC Guide 77-2:2008, Guide for specification of product properties and classes Part 2: Technical principles and guidance 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 13584-42, IEC 61360-1 and in the ISO/IEC Gui

40、de 77-2 apply. NOTE Some basic definitions and principles of key importance for the understanding of this part of ISO 23584 are provided in Annex A for information. BS ISO 23584-1:2009ISO 23584-1:2009(E) 2 ISO 2009 All rights reserved4 Principles of specification 4.1 General Clause 4 of this Interna

41、tional Standard attempts to outline the basic principles of specification in a simple language. Comprehensive description is available in the ISO/IEC Guide 77-2. 4.2 Set of attributes for description of a property Properties are described by attributes. The set of attributes describing a property is

42、 as given in Tables 1 and 2. NOTE The table contents is in accordance with the data model specified in ISO 13584-42, expanded where required as per ISO/IEC Guide 77-2. Table 1 Set of attributes for description of a property (ISO/IEC Guide 77-2) Attributea,bMandatory Translation Code Y N Version Y N

43、Definition class Y N Revision Y N Date of original definition Y N Date of current version Y N Date of current revision Y N Preferred name Y Y Synonymous name N Y Short name N Y Definition Y YSource document of definition N Y Note N YRemark YPreferred symbol N N Synonymous symbol N N Figure N NProper

44、ty type classification N N Domain Y N Formula N Depends on N N Value format N N Unit of measure Y/N N Alternative unit N N aThe contents of this table have been taken over from ISO/IEC Guide 77-2:2008, Table 1, where, additionally, a description of the meaning of each attribute is given. bAdditional

45、 attributes are included in the ISO/TC 172 database, see Table 2. BS ISO 23584-1:2009ISO 23584-1:2009(E) ISO 2009 All rights reserved 3Table 2 Additional ISO/TC 172 attributes for description of a property Attribute Mandatory Translation ownerTCSC Y NliaisonTCSC N N ebXML URI N N Classification to I

46、CS Y N 4.3 Set of attributes for description of a class Classes are described by properties. In addition, for the purpose of identification, each class is described by a set of attributes. The set of attributes describing a class is given in Tables 3 and 4. NOTE The table contents is in accordance w

47、ith the data model specified in ISO 13584-42, expanded where required in accordance with ISO/IEC Guide 77-2. Table 3 Set of attributes for description of a class (ISO/IEC Guide 77-2) Attributea,bMandatory Translation Code Y NVersion Y N Information supplier Y N Revision Y N Date of original definiti

48、on Y N Date of current version Y N Date of current revision Y N Preferred name Y Y Synonymous name N Y Short name N Y Definition Y YSource document of definition N Y Note N YRemark Yits superclass N N Applicable properties N N Applicable types N N Figure N NSubclass selectors N N Class selector valu

49、es N N aThe contents of this table have been taken over from ISO/IEC Guide 77-2:2008, Table 6, where, additionally, a description of the meaning of each attribute is given. bAdditional attributes are included in the ISO/TC 172 database, see Table 4. BS ISO 23584-1:2009ISO 23584-1:2009(E) 4 ISO 2009 All rights reservedTable 4 Additional ISO/TC 172 attributes for description of a class Attribute Mandatory Translation ownerTCSC Y N liaisonTCSC N N ebXML URI N N Classification to ICS Y N 4.