BS ISO 21368-2006 Adhesives - Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures《粘合剂 胶粘结构的制.pdf

《BS ISO 21368-2006 Adhesives - Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures《粘合剂 胶粘结构的制.pdf》由会员分享，可在线阅读，更多相关《BS ISO 21368-2006 Adhesives - Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures《粘合剂 胶粘结构的制.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58structures and reporting procedures suitable for the risk evaluation of such structuresICS 83.180Ad

2、hesives Guidelines for the fabrication of adhesively bonded BRITISH STANDARDBS ISO 21368:2005BS ISO 21368:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 3 January 2006 BSI 3 January 2006ISBN 0 580 47124 1The British Standards which imple

3、ment international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport

4、 to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the ISO title page, pa

5、ges ii to v, a blank page, pages 1 to 16, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsA list of organizations represented on this committee can be obtain

6、ed on request to its secretary.Cross-referencesenquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.National forewordThis British Standard reproduces verbatim ISO 21368:2005 and

7、 implements it as the UK national standard.The UK participation in its preparation was entrusted to Technical Committee PRI/52, Adhesives, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any Reference numberISO 21368:

8、2005(E)INTERNATIONAL STANDARD ISO21368First edition2005-10-01Adhesives Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures Adhsifs Lignes directrices pour les procdures de fabrication et de rapport pour lvaluatio

9、n des risques lis aux structures colles par adhsifs BS ISO 21368:2005ii iiiContents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references . 2 3 Terms and definitions. 2 4 Contract, design review and quality plan. 3 5 Outsourcing. 4 6 Personnel. 4 7 Equipment . 4 8 Adhesive bonding activ

10、ities 5 9 Post-bonding operations . 8 10 Storage and handling of bonding materials 9 11 Storage and handling of adherends . 9 12 Post-bonding finishing. 9 13 Inspection and testing 9 14 Non-conformance and corrective action 11 15 Identification and traceablity . 11 16 Quality records 11 Annex A (inf

11、ormative) Example of a quality plan 13 Annex B (informative) Example of a job history sheet. 14 Annex C (informative) Adhesives material log 15 Bibliography . 16 BS ISO 21368:2005iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodi

12、es (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations

13、, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the IS

14、O/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the

15、member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 21368 was prepared by Technical Committee ISO/TC 61, Plastics, Subc

16、ommittee SC 11, Products. BS ISO 21368:2005vIntroduction Adhesive bonding technology is widely used to fabricate many of the structures in the manufacturing industry, and in some companies it is the key feature to production. Such structures may range from microelectronic encapsulation to the struct

17、ure and reinforcement of aircraft wings and bridges. Adhesive bonding technology is attractive to industry because it allows flexibility in the selection of materials, product design and product manufacture through to final assembly. As such, adhesive bonding technology exerts a profound influence o

18、n the cost of fabrication and the quality of the product, thus allowing significant production savings and a competitive advantage in comparison with traditional methods of manufacture. It is important, therefore, to ensure that adhesive bonding technology is carried out in the most effective way an

19、d that appropriate control is exercised over all aspects of the operation. Within the ISO 9000 series of standards for quality systems, adhesive bonding technology is to be treated as a “special process” since bonds cannot be fully verified by subsequent inspection and testing of the product to ensu

20、re the required quality standards have been met. Quality cannot be inspected into a product, it has to be built in. Even the most extensive and sophisticated non-destructive testing does not improve the quality of bonds. For adhesively bonded structures to be effective and fit for purpose in service

21、, it is necessary to provide controls, from the design phase, through material selection, into fabrication and subsequent inspection. Poor design for adhesive bonding will create serious risks and costly difficulties in the workshop, on site or in service. Inadequate consideration of the materials t

22、o be bonded and the choice of adhesive may result in bonding problems such as lack of adhesion or inadequate gap-filling of the structure. Adhesive bonding procedures have to be correctly formulated and approved to avoid imperfections. There must be supervision to ensure that the specified quality w

23、ill be achieved. To ensure the quality of adhesively bonded structures, management needs to appreciate potential sources of trouble and to introduce appropriate quality procedures. BS ISO 21368:2005blank1Adhesives Guidelines for the fabrication of adhesively bonded structures and reporting procedure

24、s suitable for the risk evaluation of such structures 1 Scope This International Standard provides guidelines describing the adhesive bonding quality requirements suitable for use by manufacturers utilizing adhesive bonding as a means of fabrication. In particular, the guidelines define various appr

25、oaches to meeting quality requirements for fabrication and reporting procedures, both in workshops and on site. These guidelines aim to convey the importance of maintaining quality standards in fabrication and reporting procedures, keeping records and thus enabling documentation to provide the basis

26、 for risk evaluation of adhesively bonded structures in service and in use. These guidelines have been prepared such that: a) they are independent of the type of adhesively bonded structure; b) they are independent of adhesive manufacturers and suppliers product recommendations; c) they define the q

27、uality requirements for adhesive bonding in terms of fabrication and reporting procedures, both in workshops and on site; d) they may be used as the basis for risk evaluation of adhesively bonded structures in service and in use; e) they may be used as a basis for assessing a fabricators capability

28、to produce adhesively bonded structures fulfilling specified quality requirements when they are detailed in one or more of the following: a contract between the parties involved, an application standard, a regulatory statement. The guidelines contained within this International Standard may be adopt

29、ed in full or selectively chosen by the manufacturer to suit the structure concerned. The guidelines provide a flexible framework for the control of adhesive bonding activities in the following cases: Case 1 The provision of specific requirements for adhesive bonding in contracts which require the m

30、anufacturer to have a quality system other than ISO 9001. Case 2 The provision of specific requirements for adhesive bonding as guidance to a manufacturer developing a quality system. BS ISO 21368:20052 Case 3 The provision of specific requirements for references in application standards which uses

31、adhesive bonding as part of its requirements or in a contract between relevant parties. Case 4 The provision of a framework for fabrication and reporting procedures to a quality standard, suitable in particular as a basis for the risk evaluation of adhesively bonded structures. 2 Normative reference

32、s The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 8502-4, Preparation of steel substrates bef

33、ore application of paints and related products Tests for the assessment of surface cleanliness Part 4: Guidance on the estimation of the probability of condensation prior to paint application ISO 8504-1, Preparation of steel substrates before application of paints and related products Surface prepar

34、ation methods Part 1: General principles ISO 17212, Structural adhesives Guidelines for the surface preparation of metals and plastics prior to adhesive bonding 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 contract agreed requirements for

35、structure(s) ordered by a specific purchaser or a fabricators basic specification for structure(s) manufactured in series for purchasers unknown to the fabricator at the time of design and production NOTE The contract is assumed to include reference to all regulatory requirements. 3.2 special proces

36、ses processes within ISO 9001 quality systems, the result of which cannot be fully verified by subsequent inspection and testing of the product and where, for example, processing deficiencies may become apparent only after the product is in use NOTE Continuous monitoring and/or compliance with docum

37、ented procedures is required to ensure that the specified requirements are met. 3.3 fabricator all adhesive bonding workshops and/or sites under the same technical and quality management BS ISO 21368:200533.4 qualified personnel personnel approved and qualified in accordance with EWF guidelines or g

38、uidelines that can be demonstrated as equivalent NOTE See the Bibliography. 3.5 structure semi-finished or fully finished adhesively bonded component or assembly, or any other form of adhesively bonded item 3.6 quality plan plan to define and document how customer requirements are to be met 4 Contra

39、ct, design review and quality plan The fabricator shall review the contractual requirements and the design data provided by the purchaser or in-house data for structures designed by the fabricator. All information necessary to carry out the fabrication operations shall be available prior to the comm

40、encement of work. The fabricator shall demonstrate the capability to meet the contractual requirements for adhesively bonded structures by the preparation of a quality plan detailing materials, methods, work instructions, and inspection and quality assurance (QA) procedures. Where relevant, national

41、 and international standards shall be incorporated for definition, processing, inspection and testing procedures. Where standards are not available, the fabricator shall specify suitable procedures and methods allowing compliance with the contractual requirements. It is necessary to provide a qualit

42、y plan resulting from the contract and design reviews between fabricator and customer. The quality plan shall define and document how customer requirements shall be met, and shall define all relevant aspects of materials; methods; production plans; work instructions; inspection and test; QA procedur

43、es; health and safety measures; disposal and environmental protection measures. National statutory obligations as to health and safety requirements and environmental protection measures shall be incorporated. The quality plan shall not be accepted for use until mutually agreed and confirmed in writi

44、ng between customer and fabricator, where appropriate. An example of a quality plan is given in Annex A. BS ISO 21368:20054 Issues relating to good joint design shall be included in the procurement specification issued to the fabricator. 5 Outsourcing When a fabricator intends to outsource (e.g. for

45、 adhesive bonding, inspection or non-destructive testing), all relevant specifications and requirements shall be supplied by the fabricator to the outsource supplier. The fabricator shall require outsource suppliers to provide a quality plan and such records and documentation of their work as may be

46、 specified by the fabricator. The fabricator shall ensure that outsource suppliers can comply with the quality requirements of the contract. The information to be provided by the fabricator to the outsource supplier shall include all relevant data from the contract and design review. Additional requ

47、irements may need to be specified if any design aspects of the structure are to be outsourced. 6 Personnel 6.1 Qualifications The fabricator shall ensure that personnel involved in inspection and testing are qualified and are competent to perform their respective tasks. NOTE EWF guidelines are consi

48、dered adequate for such qualification and certification. 6.2 Process management and audit The fabricator shall have appropriately qualified personnel such that all specified processing requirements can be fulfilled throughout the fabrication process. The fabricator shall ensure that all necessary pr

49、ocedural and recording documentation and safety and personnel protection equipment is available during all phases of fabrication. The fabricator shall ensure that procedures are in place for internal and external audits. Audits shall be carried out by relevantly qualified personnel within the fabricators quality organization. 6.3 Inspection and testing The fabricator shall ensure that the personnel involved in inspection and testing are suitably qualified and are competent to perform their respectiv