BS ISO 19699-1-2017 Superabsorbent polymer Sodium polyacrylate resin for absorbing blood Test methods《超吸收性聚合物 用于血液吸收的聚丙烯酸钠树脂 试验方法》.pdf

《BS ISO 19699-1-2017 Superabsorbent polymer Sodium polyacrylate resin for absorbing blood Test methods《超吸收性聚合物 用于血液吸收的聚丙烯酸钠树脂 试验方法》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 19699-1-2017 Superabsorbent polymer Sodium polyacrylate resin for absorbing blood Test methods《超吸收性聚合物 用于血液吸收的聚丙烯酸钠树脂 试验方法》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、Superabsorbent polymer Sodium polyacrylate resin for absorbing bloodPart 1: Test methodsBS ISO 196991:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 ISO 2017Superabsorbent polymer Sodium polyacrylate resin for absorbing blood Part 1:Test methodsRsines super-abs

2、orbantes Polyacrylate de sodium pour labsorption du sang Partie 1: Mthodes dessaiINTERNATIONALSTANDARDISO19699-1First edition2017-08Reference numberISO 19699-1:2017(E)National forewordThis British Standard is the UK implementation of ISO 196991:2017.The UK participation in its preparation was entrus

3、ted to Technical Committee PRI/75, Plastics and rubber film and sheets.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct appl

4、ication. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 91304 4ICS 83.140.99Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Com

5、mittee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS ISO 196991:2017 ISO 2017Superabsorbent polymer Sodium polyacrylate resin for absorbing blood Part 1: Test methodsRsines super-absorbantes Polyacrylate de sodium pour labsorption du sang Par

6、tie 1: Mthodes dessaiINTERNATIONAL STANDARDISO19699-1First edition2017-08Reference numberISO 19699-1:2017(E)BS ISO 196991:2017ISO 19699-1:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of t

7、his publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in

8、the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 196991:2017ISO 19699-1:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in S

9、witzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be

10、 requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO 19699-1:2017(E)Foreword ivIntroduction v1 Scop

11、e . 12 Normative references 13 Terms and definitions . 14 Test methods . 24.1 General . 24.2 Determination of amount of residual monomers . 24.3 Determination of volatile content 34.4 Determination of pH 34.5 Determination of particle size distribution 34.6 Determination of bulk density. 34.7 Determ

12、ination of whiteness 34.8 Determination of simulated blood absorption capacity . 34.8.1 General principle . 34.8.2 Reagents 34.8.3 Apparatus . 34.8.4 Sampling 34.8.5 Procedure . 44.8.6 Calculation and expression of results 44.9 Determination of simulated blood absorption rate 54.9.1 General principl

13、e . 54.9.2 Reagents 54.9.3 Apparatus . 54.9.4 Sampling 54.9.5 Procedure . 54.9.6 Calculation . 6Annex A (normative) Preparation of simulated blood 7Annex B (informative) Comparison of human blood and simulated blood absorption capacity of SAP 9Bibliography .10 ISO 2017 All rights reserved iiiContent

14、s PageBS ISO 196991:2017ISO 19699-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member

15、body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electr

16、otechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of

17、ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be hel

18、d responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is informat

19、ion given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO)

20、 principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11, Products.A list of all parts in the ISO 19699 series can be found on the ISO website.iv ISO 2017 A

21、ll rights reservedBS ISO 196991:2017ISO 19699-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees.

22、Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Internat

23、ional Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the differe

24、nt types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shal

25、l not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document

26、 is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organi

27、zation (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11, Products.A list of all parts in the ISO 19699 series can be found on the ISO website.i

28、v ISO 2017 All rights reserved ISO 19699-1:2017(E)IntroductionThe test methods described in this document have been practically used by relevant production enterprises for several years and have proven to be reliable with respect to common criteria of quality of test methods (validity, repeatability

29、, etc.). They are applicable to testing superabsorbent polymer of sodium polyacrylate used in hygiene products (such as sanitary towels and pads) and medical products (such as tourniquets and surgery coats).The International Organization for Standardization (ISO) draws attention to the fact that it

30、is claimed that compliance with this document may involve the use of a patent concerning test methods of simulated blood absorption capacity and simulated blood absorption rate given in 4.8 and 4.9.ISO takes no position concerning the evidence, validity and scope of this patent right. The holder of

31、this patent right has assured ISO that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with ISO. Information may be obtained from

32、:Jinan Haoyue Resin Co., LtdBucun District, Zhangqiu City, Shandong ProvinceChinaAttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. ISO shall not be held responsible for identifying any or all such p

33、atent rights. ISO 2017 All rights reserved vBS ISO 196991:2017BS ISO 196991:2017Superabsorbent polymer Sodium polyacrylate resin for absorbing blood Part 1: Test methods1 ScopeThis document specifies the testing methods for the properties of superabsorbent polymer (SAP) of sodium polyacrylate used i

34、n physical hygiene and medical products for absorbing blood. It also gives a formulation for simulated blood, a kind of viscous liquid, for replacing blood when testing the properties of the superabsorbent polymer.The test methods and simulated blood in this document apply to sodium polyacrylate res

35、in, as raw material, and apply to SAP for the final products used for absorbing blood.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited appl

36、ies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 758, Liquid chemical products for industrial use Determination of density at 20 CISO 2470-2, Paper, board and pulps Measurement of diffuse blue reflectance factor Part 2: Outdoor dayligh

37、t conditions (D65 brightness)ISO 3696, Water for analytical laboratory use Specification and test methodsISO 6353-1, Reagents for chemical analysis Part 1: General test methodsISO 6388, Surface active agents Determination of flow properties using a rotational viscometerISO 17190-1, Urine-absorbing a

38、ids for incontinence Test methods for characterizing polymer-based absorbent materials Part 1: Determination of pHISO 17190-2, Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 2: Determination of amount of residual monomersISO 17190-3, Urin

39、e-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 3: Determination of particle size distribution by sieve fractionationISO 17190-4, Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 4: D

40、etermination of moisture content by mass loss upon heatingISO 17190-9, Urine-absorbing aids for incontinence Test methods for characterizing polymer-based absorbent materials Part 9: Gravimetric determination of densityEN 14370, Surface active agents Determination of surface tension3 Terms and defin

41、itionsFor the purposes of this document, the following terms and definitions apply.INTERNATIONAL STANDARD ISO 19699-1:2017(E) ISO 2017 All rights reserved 1BS ISO 196991:2017ISO 19699-1:2017(E)ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC El

42、ectropedia: available at h t t p :/ www .electropedia .org/ ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp3.1superabsorbent polymerSAPpolymer that can absorb and retain extremely large amount of liquid relative to its massNote 1 to entry: Absorption is dependent on liquid t

43、ype.Note 2 to entry: It is insoluble in water or organic solvents. However, after it has contacted with water, in a short time it swells into gel. Even an external pressure cannot force out the liquid.3.2amount of residual monomersquantity of remaining sodium acrylate and acrylic acid in the sodium

44、polyacrylate resinNote 1 to entry: It is expressed in milligrams per kilogram (mg/kg).3.3volatile contentquantity of water and other small molecules in the sodium polyacrylate resinNote 1 to entry: It is expressed as a percentage by mass (%).3.4particle size distributionpercentage of each of fractio

45、n of the particles based on mass3.5bulk densitymass of sodium polyacrylate resin per unit volume after free fall including voids3.6simulated bloodsolution having a similar absorption trend as in human blood3.7simulated blood absorption capacityamount of simulated blood (3.6) absorbed by 1 g of sodiu

46、m polyacrylate resin after a set amount of time3.8simulated blood absorption ratetime taken for 1 g of sodium polyacrylate resin to absorb 5,0 ml of simulated blood (3.6)4 Test methods4.1 GeneralUse only reagents of recognized analytical grade and grade 3 water as specified in ISO 3696, unless other

47、wise specified.4.2 Determination of amount of residual monomersThe amount of residual monomers shall be determined according to ISO 17190-2.2 ISO 2017 All rights reservedBS ISO 196991:2017ISO 19699-1:2017(E)ISO and IEC maintain terminological databases for use in standardization at the following add

48、resses: IEC Electropedia: available at h t t p :/ www .electropedia .org/ ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp3.1superabsorbent polymerSAPpolymer that can absorb and retain extremely large amount of liquid relative to its massNote 1 to entry: Absorption is depende

49、nt on liquid type.Note 2 to entry: It is insoluble in water or organic solvents. However, after it has contacted with water, in a short time it swells into gel. Even an external pressure cannot force out the liquid.3.2amount of residual monomersquantity of remaining sodium acrylate and acrylic acid in the sodium polyacrylate resinNote 1 to entry: It is expressed in milligrams per kilogram (mg/kg).3.3volatile contentquantity of water and other small molecules in the sod