BS ISO 17572-3-2015 Intelligent transport systems (ITS) Location referencing for geographic databases Dynamic location references (dynamic profile)《智能运输系统(ITS) 地理数据库用参考定位 动态定位参考(动态.pdf

《BS ISO 17572-3-2015 Intelligent transport systems (ITS) Location referencing for geographic databases Dynamic location references (dynamic profile)《智能运输系统(ITS) 地理数据库用参考定位 动态定位参考(动态.pdf》由会员分享，可在线阅读，更多相关《BS ISO 17572-3-2015 Intelligent transport systems (ITS) Location referencing for geographic databases Dynamic location references (dynamic profile)《智能运输系统(ITS) 地理数据库用参考定位 动态定位参考(动态.pdf（116页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS ISO 17572-3:2015Intelligent transport systems(ITS) Location referencing forgeographic databasesPart 3: Dynamic location references(dynamic profile)BS ISO 17572-3:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 17572-3:2015. It s

2、upersedes BS ISO 17572-3:2008 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/278, Intelligent transport systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to

3、include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 82015 1 ICS 03.220.01; 35.240.60 Compliance with a British Standard cannot confer immunity from legal ob

4、ligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e d ISO 2015Intelligent transport systems (ITS) Location referencing for geographic databases Par

5、t 3: Dynamic location references (dynamic profile)Systmes intelligents de transport (SIT) Localisation pour bases de donnes gographiques Partie 3: Localisations dynamiques (profil dynamique)INTERNATIONAL STANDARDISO 17572-3Second edition 2015-01-15Reference number ISO 17572-3:2015(E)BS ISO 17572-3:2

6、015ISO 17572-3:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

7、the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgW

8、eb www.iso.orgPublished in SwitzerlandBS ISO 17572-3:2015ISO 17572-3:2015(E)Contents PageForeword vIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 14 Abbreviated terms and attribute codes 44.1 Abbreviated terms . 44.2 Attribute codes 55 Objectives and requirements for a l

9、ocation referencing method . 66 Conceptual data model for location referencing methods . 67 Specification of dynamic location references . 67.1 General specification . 67.2 Location referencing building blocks 77.2.1 General 77.2.2 Points . 77.2.3 Attributes . 87.2.4 Next-point relationship . 157.2.

10、5 Attribute type list .158 Encoding rules .158.1 General 158.2 General point representation and selection rules .218.3 Location reference core encoding rules . 218.3.1 Location selection 218.3.2 Location reference core point selection .228.3.3 Core point selection Location points228.3.4 Core point s

11、election Intersection points .238.3.5 Core point selection Routing points 258.3.6 Intersection point attributes 278.3.7 Routing point attributes . 288.3.8 Location reference core encoding parameters .298.4 Location reference extension encoding rules 298.4.1 General. 298.4.2 Location reference extens

12、ion necessity rules 308.4.3 Location reference extension point selection rules 308.4.4 Location reference extension encoding parameters 318.5 Coding of point locations. 328.6 Coding of area locations . 328.6.1 Coding of explicit area 328.6.2 Coding of implicit area .349 Logical data format specifica

13、tion .379.1 General 379.2 Data model definition. 379.2.1 General. 379.2.2 General data model .389.2.3 Linear location data model 389.2.4 Implicit area data model 399.2.5 Explicit area data model . 40Annex A (informative) Dynamic location reference, TPEG2 logical structure .41Annex B (normative) Dyna

14、mic location reference, TPEG2 binary representation .58 ISO 2015 All rights reserved iiiBS ISO 17572-3:2015ISO 17572-3:2015(E)Annex C (normative) Dynamic location reference, TPEG2 XML representation .66Annex D (informative) Coding guidelines for dynamic location references 73Annex E (informative) Co

15、mpressed data format specification 79Bibliography . 103iv ISO 2015 All rights reservedBS ISO 17572-3:2015ISO 17572-3:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International

16、 Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, a

17、lso take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1.

18、 In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the eleme

19、nts of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received

20、 (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adheren

21、ce to the WTO principles in the Technical Barriers to Trade (TBT), see the following URL: Foreword Supplementary information .The committee responsible for this document is ISO/TC 204, Intelligent transport systems.This second edition cancels and replaces the first edition (ISO 17572-3:2008), which

22、has been technically revised. It also incorporates Technical Corrigendum ISO 17572-3:2008/Cor1:2009.ISO 17572 consists of the following parts, under the general title Intelligent transport systems (ITS) Location referencing for geographic databases: Part 1: General requirements and conceptual model

23、Part 2: Pre-coded location references (pre-coded profile) Part 3: Dynamic location references (dynamic profile) ISO 2015 All rights reserved vBS ISO 17572-3:2015ISO 17572-3:2015(E)IntroductionA location reference (LR) is a unique identification of a geographic object. In a digital world, a real-worl

24、d geographic object can be represented by a feature in a geographic database. An example of a commonly known location reference is a postal address of a house. Examples of object instances include a particular exit ramp on a particular motorway, a road junction, or a hotel. For efficiency reasons, l

25、ocation references are often coded. This is especially significant if the location reference is used to define the location for information about various objects between different systems. For intelligent transport systems (ITS), many different types of real-world objects will be addressed. Amongst

26、these, location referencing of the road network, or components thereof, is a particular focus.Communication of a location reference for specific geographic phenomena, corresponding to objects in geographic databases, in a standard, unambiguous manner is a vital part of an integrated ITS system, in w

27、hich different applications and sources of geographic data will be used. Location referencing methods (LRMs, methods of referencing object instances) differ by applications, by the data model used to create the database, or by the enforced object referencing imposed by the specific mapping system us

28、ed to create and store the database. A standard location referencing method allows for a common and unambiguous identification of object instances representing the same geographic phenomena in different geographic databases produced by different vendors, for varied applications, and operating on mul

29、tiple hardware/software platforms. If ITS applications using digital map databases are to become widespread, data reference across various applications and systems has to be possible. Information prepared on one system, such as traffic messages, has to be interpretable by all receiving systems. A st

30、andard method to refer to specific object instances is essential to achieving such objectives.Japan, Korea, Australia, Canada, the US, and European ITS bodies are all supporting activities of location referencing. Japan has developed a Link Specification for VICS. In Europe, the RDS-TMC traffic mess

31、aging system has been developed. In addition, methods have been developed and refined in the EVIDENCE and AGORA projects based on intersections identified by geographic coordinates and other intersection descriptors. After the publication of the first edition of this International Standard in 2008,

32、TPEG had changed to TPEG2. Modifications related to this change are captured in this second edition. In the US, standards for location referencing have been developed to accommodate several different location referencing methods.This International Standard provides specifications for location refere

33、ncing for ITS systems (although other committees or standardization bodies can subsequently consider extending it to a more generic context). In addition, this version does not deal with public transport location referencing; this issue will be dealt with in a later version.The International Organiz

34、ation for Standardization (ISO) draws attention to the fact that it is claimed that compliance with this part of ISO 17572 can involve the use of a patent concerning procedures, methods and/or formats given in this part of ISO 17572 in Clauses 8 and 9 and Annexes A, B, and C.ISO takes no position co

35、ncerning the evidence, validity, and scope of this patent right.The holder of this patent right has ensured ISO that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder

36、 of this patent right is registered with ISO. Information can be obtained from:vi ISO 2015 All rights reservedBS ISO 17572-3:2015ISO 17572-3:2015(E)Panasonic,Matsushita Electric Co., Ltd.OBP Panasonic Tower, 21-61 Shiromi, Chuo-ku, Osaka, 5406208, JapanBlaupunkt GmbH Robert-Bosch-Str. 200, 31139 Hil

37、desheim, GermanySiemens AG Philipstr. 1, 35576 Wetzlar, GermanyTele Atlas NV Reitscheweg 7F, 5232 BX s-Hertogenbosch, NetherlandsToyota Motor Co. (et al.) 1 Toyota-Cho, Toyota City, Aichi Prefecture 4718571, Japan ISO 2015 All rights reserved viiBS ISO 17572-3:2015BS ISO 17572-3:2015Intelligent tran

38、sport systems (ITS) Location referencing for geographic databases Part 3: Dynamic location references (dynamic profile)1 ScopeThis International Standard specifies location referencing methods (LRMs) that describe locations in the context of geographic databases and will be used to locate transport-

39、related phenomena in an encoder system as well as in the decoder side. This International Standard defines what is meant by such objects and describes the reference in detail, including whether or not components of the reference are mandatory or optional, and their characteristics.This International

40、 Standard specifies two different LRMs: pre-coded location references (pre-coded profile); dynamic location references (dynamic profile).This International Standard does not define a physical format for implementing the LRM. However, the requirements for physical formats are defined.This Internation

41、al Standard does not define details of the location referencing system (LRS), i.e. how the LRMs are to be implemented in software, hardware, or processes.This part of ISO 17572 specifies the dynamic location referencing method, comprising attributes and encoding rules logical data modelling TPEG phy

42、sical format specification for dynamic location references, coding guidelines for dynamic location references; compressed data format specification.It is consistent with other International Standards developed by ISO/TC 204 such as ISO 14825.2 Normative referencesThe following documents, in whole or

43、 in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 17572-1, Intelligent transport systems (

44、ITS) Location referencing for geographic databases Part 1: General requirements and conceptual model3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 17572-1 and the following apply.INTERNATIONAL STANDARD ISO 17572-3:2015(E) ISO 2015 All rights reserved

45、 1BS ISO 17572-3:2015ISO 17572-3:2015(E)3.1bearingangle between a reference direction and the direction to an object measured clockwiseNote 1 to entry: Unless otherwise specified, the reference direction is generally understood to be geographic north.3.2connection angleCAdifference between side road

46、 bearing (3.23) and bearing (3.1) at a point3.3connection pointlocation point captured in the location reference core, which forms the start point of a path external to the locationNote 1 to entry: Connection points are used to connect a location reference extension to a location reference core and

47、to connect linear locations to form a subnetwork. The connection point is identified using its connection point index.Note 2 to entry: The connection point index is implicitly defined by the order of the points in a location reference.3.4connectivitystatus of being topologically connectedNote 1 to e

48、ntry: In a graph, two or more edges are said to be connected if they share one or more nodes.3.5coordinate pairset of two coordinates (one longitude value and one latitude value), representing a position on the earth modelNote 1 to entry: Within the scope of this International Standard, the earth mo

49、del is embodied by ITRS and by ITRF coordinates.3.6core pointCPpoint belonging to the location reference core3.7destination locationlocation to be used as the end location of a journey for a route guidance application3.8extension pointEPpoint belonging to the location reference extension3.9great circlecircle on the surface of a sphere that has the same circumference as the sphereNote 1 to entry: The connection between two points on a sphere along the great circle passing through the said two points is the shortest connec