BS ISO 15516-2006 Ships and marine technology - Launching appliances for davit-launched lifeboats《船舶和海上技术 吊放式救生艇用降落装置》.pdf

《BS ISO 15516-2006 Ships and marine technology - Launching appliances for davit-launched lifeboats《船舶和海上技术 吊放式救生艇用降落装置》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 15516-2006 Ships and marine technology - Launching appliances for davit-launched lifeboats《船舶和海上技术 吊放式救生艇用降落装置》.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58for davit-launched lifeboatsICS 47.020.50; 47.040Ships and marine technology Launching appliances B

2、RITISH STANDARDBS ISO15516:2006BS ISO 15516:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2006 BSI 2006ISBN 0 580 48890 Xrequest to its secretary.Cross-referencesThe British Standards which implement international publications r

3、eferred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary pro

4、visions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the ISO title page, pages ii to v, a blank page, pages

5、1 to 14, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsA list of organizations represented on this subcommittee can be obtained on present to the responsib

6、le international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.National forewordThis British Standard reproduces verbatim ISO 15516:2006 and implem

7、ents it as the UK national standard. The UK participation in its preparation was entrusted by Technical Committee SME/32, Ships and marine technology, to Subcommittee SME/32/4, Outfitting and deck machinery, which has the responsibility to: aid enquirers to understand the text;Reference numberISO 15

8、516:2006(E)INTERNATIONAL STANDARD ISO15516First edition2006-02-15Ships and marine technology Launching appliances for davit-launched lifeboats Navires et technologie maritime Engins de mise leau des embarcations de sauvetage sous bossoirs BS ISO 15516:2006ii iiiContents Page Foreword iv Introduction

9、 v 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 1 4 Classification and composition. 3 4.1 Composition of davit 3 4.2 Classification of davit. 3 4.3 Classification of winch. 3 5 Requirements 3 5.1 Performance 3 5.2 Design and construction 5 5.3 Safety . 9 5.4 Maintenance 9 6 Test m

10、ethods. 10 6.1 Loose gears test . 10 6.2 Winch test 10 6.3 Test of launching appliance 11 7 Inspection code. 12 7.1 Prototype inspection 12 7.2 Production inspection 13 8 Mark 13 BS ISO 15516:2006iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of nation

11、al standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Internatio

12、nal organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rule

13、s given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at l

14、east 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 15516 was prepared by Technical Committee ISO/TC 8

15、, Ships and marine technology, Subcommittee SC 4, Outfitting and deck machinery. This first edition cancels and replaces ISO 6067:1985, which has been technically revised. BS ISO 15516:2006vIntroduction This International Standard which forms a code of practical interpretation and amplification of t

16、he requirements of the CONVENTION FOR THE SAFETY OF LIFE AT SEA (SOLAS), deals with both winches and davits for lifeboats to provide an identical basis for design, manufacture and acceptance of Launching appliances for davit-launched lifeboats for use by ship-owners, shipbuilders and appropriate org

17、anizations. This International Standard incorporates and revises the requirements of ISO 6067 and, as such, replaces ISO 6067 in its entirety. Launching appliances for free-fall lifeboats are not covered by this standard because of their different methods of launching, recovery and stowage. Consider

18、ing the convenience in practice, this standard specifies some values, such as the minimum speed of recovering light-loaded lifeboats by power (when necessary) and the recovery speed of unpowered winch, which are not required by SOLAS but have been given in ISO 6067. This International Standard is al

19、so applicable to launching appliances for fast rescue boats on ro-ro passenger ships. This International Standard is mainly based on AMENDMENTS from 1983 to 1996 to SOLAS 1974 and IMO RESOLUTIONS and protocols concerned, especially MSC.47(66) AMENDMENTS TO THE INTERNATIONAL CONVENTION FOR THE SAFETY

20、 OF LIFE AT SEA 1974, MSC.48(66) INTERNATIONAL LIFE-SAVING APPLIANCE CODE and MSC.81(70) LIFE-SAVING APPLIANCE TEST. BS ISO 15516:2006blank1Ships and marine technology Launching appliances for davit-launched lifeboats 1 Scope This International Standard specifies the requirements of performances, de

21、sign, construction, safety, maintenance and test of launching appliances for davit-launched lifeboats. This International Standard is applicable to launching appliances for davit-launched lifeboats as well as launching appliances for davit-launched rescue boats on every kind of sea-going ship, inclu

22、ding launching appliances for fast rescue boats on ro-ro passenger ships, but is not applicable to launching appliances for free-fall lifeboats. This International Standard is also a reference for similar appliances on inland ships. NOTE Every provision in this standard, unless expressly stated othe

23、rwise, is also applicable to launching appliances for davit-launched rescue boats. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the

24、 referenced document (including any amendments) applies. ISO 2944, Fluid power systems and components Nominal pressure ISO 3828, Shipbuilding and marine structures Deck machinery Vocabulary ISO 4413, Hydraulic fluid power General rules relating to systems ISO 4414, Pneumatic fluid power General rule

25、s relating to systems IEC 60092 (all parts), Electrical installations in ships IEC 60529, Degrees of protection provided by enclosures (IP Code) 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 3828 and the following apply. 3.1 non-loaded boat lifeboa

26、t or rescue boat fully equipped without persons NOTE Hereinafter, both lifeboat and rescue boat are referred to as boat. BS ISO 15516:20062 3.2 light-loaded lifeboat lifeboat fully equipped and loaded by crew. NOTE The number of crew members is provided by design and is at least 2 persons, each havi

27、ng an average mass of 75 kg. 3.3 fully loaded lifeboat boat fully equipped and loaded with a full complement of persons 3.4 boat davit main structure of the launching appliance and its fittings, including loose gears, hanging-off pendants, lashings, bowsing, tricking gears, etc. 3.5 loose gear parts

28、 and assemblies withstanding loads during hoisting boat EXAMPLES falls, blocks, suspension chains, links, padeyes, shackles, hooks, swivel, fastenings and other non-structural fittings which bear loads during launching and recovery of boats 3.6 lifeboat winch boat winch used for launching and recove

29、ring the lifeboat 3.7 rescue boat winch boat winch used for launching and recovering the rescue boat NOTE Hereinafter, lifeboat winch and rescue boat winch are referred to as winch. 3.8 maximum working load load to the launching appliance during launching the maximum weight of fully loaded boats whi

30、ch can be assigned to this launching appliance 3.9 maximum recovering load load to the launching appliance during recovering the maximum weight of boats which can be assigned to this launching appliance NOTE For lifeboats, the weight of light-loaded lifeboats. For rescue boats, the weight of fully-l

31、oaded boats. For lifeboats which are also rescue boats, the weight of a non-loaded boat plus the weight of its rescue boat complement of persons (minimum 6 persons). 3.10 lightest launching load load to the launching appliance during launching the lightest weight of non-loaded boats which can be ass

32、igned to the launching appliance 3.11 maximum working load of winch maximum load held by the falls at the winch drum, during launching and recovering the boat 3.12 hoisting load of winch load held by the falls at the winch drum when a launching appliance hoists the maximum recovering load BS ISO 155

33、16:200633.13 maximum governing load a load held by the falls at the winch drum when a launching appliance lowers the maximum weight of fully loaded boats which is applicable to it 3.14 fleet angle angle between the direction of the fall winding off the drum and the perpendicular plane of the drum ax

34、is 4 Classification and composition A launching appliance generally consists of a davit in combination with a winch. 4.1 Composition of davit A davit is generally composed of arms, frames, loose gears and other attachments, etc. 4.2 Classification of davit The basic construction type of davit is mai

35、nly classified as a gravity davit and mechanical stored-power davit according to the way to turn out davit arms, including other construction types of davits which comply with the requirements of this International Standard. 4.3 Classification of winch The basic types of winch are mainly classified

36、as below (including other construction types of davits which comply with the requirements of this International Standard). 4.3.1 Winches can be classified as a) unpowered winch, or b) powered winch. The power of a winch can be electrical, hydraulic or pneumatic. Unpowered winches do not apply to res

37、cue boats. 4.3.2 Winches can also be classified according to purpose as a) a lifeboat winch, b) a rescue boat winch, or c) the winch for both lifeboats and rescue boats. This winch has the performance of both a) and b). 5 Requirements 5.1 Performance 5.1.1 Launching of boat 5.1.1.1 A launching appli

38、ance shall be capable of safely lowering a non-loaded boat and a fully loaded boat against a trim of up to 10 and a list of up to 20 either way. BS ISO 15516:20064 5.1.1.2 Notwithstanding the requirement of 5.1.1.1, the launching appliances for oil tankers, chemical tankers and gas carriers with a f

39、inal angle of heel greater than 20 shall be capable of lowering non-loaded boats and fully loaded boats at the final angle of heel on the lower side of the ship, taking into consideration the final damaged waterline of the ship. 5.1.1.3 A launching appliance shall not depend on any means other than

40、gravity or stored mechanical power which is independent of the ship power supplies to launch the boat it serves. 5.1.1.4 A launching appliance shall be capable of lowering and halting boats in a controlled manner, and the speed at which the boat is lowered into the water shall conform to Table 1. Ta

41、ble 1 Boat condition Lowering speed of boats m/s S = 0,4 + 0,02H where low limit S is the lowest limit of lowering speed; H is the height in meters from davit head to the waterline with the ship at the lightest seagoing condition; S S is the 1, when H 30, or the value required by the Administration.

42、 1,3 or the value required by the Administration Fully loaded boat high limit 1,0 only for fast rescue boat launching appliances low limit 0,7S (for a rescue boat with its weight less than 550 kg. This shall be to the satisfaction of the Administration) Non-loaded boat high limit 1,0 or the value re

43、quired by national administrations NOTE The davit is supposed to be in the embarkation state when calculating H. 5.1.1.5 For the launching appliances for lifeboats on cargo ships of 20 000 tons and upwards and launching appliances for rescue boats on all ships, it is taken into account that boats sh

44、all be capable of being safely launched into water with the ship making headway at speeds of up to 5 knots in calm water. 5.1.2 Recovery of boats 5.1.2.1 A launching appliance shall be capable of recovering a light-loaded lifeboat or a fully loaded rescue boat by power from water to stowed position

45、under ship conditions of even keel. Every rescue boat launching appliance shall be fitted with a powered winch. 5.1.2.2 The speed of recovering boat by power (when necessary) shall conform to Table 2. Table 2 Boat state Speed of recovering boat by power m/s fully loaded rescue boat W 0,3 light-loade

46、d lifeboat W 0,05 fully loaded fast rescue boat W 0,8 BS ISO 15516:200655.1.2.3 Every powered winch shall also be fitted with a hand gear capable of recovering light-loaded lifeboat or fully loaded rescue boat from water to stowed position. 5.1.2.4 The recovering speed for unpowered winch of lifeboa

47、t shall be not less than 0,005 m/s. 5.1.3 Stowage of boats 5.1.3.1 A launching appliance shall serve only one boat. The stowed boat shall always be in a state of continuous readiness for launching boats. 5.1.3.2 A launching appliance shall be so designed that boats can be embarked on and launched di

48、rectly from the stowed position, only if the launching appliance is carried on passenger ships where boats may be embarked on from either the stowed position or the embarkation deck, but not from both places. 5.1.3.3 A launching appliance shall be so designed and arranged that it is convenient for p

49、eople to embark. Arrangement for rescue boat embarkation and recovery shall allow for safe and efficient handling of a stretcher case. 5.1.4 Operation of launching appliances 5.1.4.1 A launching appliance may be actuated by one person on the ships deck, and the boat shall always be visible to the person during operating. 5.1.4.2 There shall be a function such that a launching appliance can be remotely actuated to lower the boat from a position within the boat and without a person remaining on the ships deck. 5.1.4.3 A launch