BS ISO 15372-2003 Ships and marine technology Inflatable rescue boats Coated fabrics for inflatable chambers《船舶与海洋技术 充气式救生艇 充气室用漆布》.pdf

《BS ISO 15372-2003 Ships and marine technology Inflatable rescue boats Coated fabrics for inflatable chambers《船舶与海洋技术 充气式救生艇 充气室用漆布》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 15372-2003 Ships and marine technology Inflatable rescue boats Coated fabrics for inflatable chambers《船舶与海洋技术 充气式救生艇 充气室用漆布》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 15372:2000 Ships and marine technology Inflatable rescue boats Coated fabrics for inflatable chambers ICS 47.080 BS ISO 15372:2000 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 10 September 2003 BSI 10 September 2003

2、 ISBN 0 580 42593 2 National foreword This British Standard reproduces verbatim ISO 15372:2000 and implements it as the UK national standard. The UK participation in its preparation was entrusted by Technical Committee SME/32, Ships and marine technology steering committee, to Subcommittee SME/32/1,

3、 Ships and marine technology Lifesaving and fire protection which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this doc

4、ument may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract

5、. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for c

6、hange, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to v, a blank page, pages 1 to 12, an inside back cover and a

7、back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsReference number ISO 15372:2000(E) INTERNATIONAL STANDARD ISO 15372 First edition 2000-12-01 Ships and marine technology Inflatable r

8、escue boats Coated fabrics for inflatable chambers Navires et technologie marine Bateaux de sauvetage gonflables Supports textiles revtus pour chambres gonflables BSISO15372:2000DPF dlcsiremia ihTs PDF file mya ctnoain emdeddeb tyfepcaes. In acccnadroe with Aebods licnesign lopic,y this file may be

9、pirntde ro ivwede tub slahl ton eb ideted lnuess teh tyfepacse which aer emdeddeb era licnesed to dna intslaled on teh computre freporming teh idetign. In wodlnidaogn this f,eli trapies accept tniereh teh sersnoptilibiy of ton nifrgnigni Asebod licsnegni ilopcy. ehT ISO tneClar Secteraairt accepts n

10、o lilibaity ni this .aera Aebod is a tedarmakr fo Aebod Stsyems Icntaropro.de teDails fo the sfotwera pcudorts sude to crtaee tihs PFD file can be fdnuo in the Glarene Info leratiev to the fil;e the Pc-FDaertion arapmteres were tpoimizde for pirtning. Evyre cera sah neeb taken to enseru taht teh fil

11、e is suitlbae fro sue by ISO memreb idob.se In teh lnuikley etnev ttah a plborem leratign to it is f,dnuo lpsaee ifnrom teh tneClar Sceterairat at the sserdda givne lebwo. ISO 0002 All rhgits rsevre.de elnUss towrehise scepfidei, on trap of tihs cilbuptanoi mya eb cudorperde ro utzilide ni yna form

12、ro yb yna snaem, eelctinorc ro mecinahcal, inclidugn tohpociypong dna micrfoilm, wittuoh repmissino in writing form eitreh ISO at teh erddass lebwo ro ISOs memreb ydob in the ctnuoyr of the rtseuqee.r ISO cirypothg fofice saCe tsopale 65 1121-HC aveneG 20 leT. + 41 22 947 10 11 xaF + 14 22 947 90 74

13、 E-mail cirypothgiso.ch eWb www.iso.ch ii BSISO15372:2000 iii Contents Page Foreword.iv Introductioniv 1 Scope 1 2 Normative references 1 3 General requirements2 4 Testing of production fabrics.4 5 Marking .4 6 Approval-testing procedures4 BSISO15372:2000iv Foreword ISO (the International Organizati

14、on for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established ha

15、s the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Inte

16、rnational Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the m

17、ember bodies casting a vote. Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 15372 was prepared by Technical

18、 Committee ISO/TC 8, Ships and marine technology, Subcommittee SC 1, Lifesaving and fire protection. BSISO15372:2000 v Introduction This International Standard is intended to supplement International Maritime Organization (IMO) requirements for rescue boats used on ships complying with the 1974 Safe

19、ty of Life At Sea Convention (SOLAS 74), as amended. BSISO15372:2000INTENRATIONAL TSANDADR ISO 27351:(0002)E1 Ships and marine technology Inflatable rescue boats Coated fabrics for inflatable chambers 1 Scope This International Standard specifies the minimum requirements for coated fabrics, and test

20、 procedures for those fabrics, for use in the construction of inflatable chambers of rescue boats complying with the 1974 Safety of Life at Sea Convention (SOLAS), as amended; Chapter I, paragraph 1.2, and Chapter V of the International Life-Saving Appliance Code IMO Resolution MSC.48 (66); and the

21、IMO Assembly resolution A.689(17), as amended. These coated fabrics consist of a base textile with a synthetic elastomeric or plastomeric compound applied to one or both faces. Requirements for fabrics for inflatable boats other than SOLAS rescue boats are contained in ISO 6185:1982, Shipbuilding an

22、d marine structures Inflatable boats Boats made of reinforced elastomers or plastomers. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments

23、 to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition

24、of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 1421:1998, Rubber- or plastics-coated fabrics Determination of tensile strength and elongation at break. ISO 1817:1999, Rubber, vulcanized Determination of the eff

25、ect of liquids. ISO 2286-2:1998, Rubber- or plastics-coated fabrics Determination of roll characteristics Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate. ISO 2411:2000, Rubber- or plastics-coated fabrics Determination

26、of coating adhesion. ISO 3011:1997, Rubber- or plastics-coated fabrics Determination of resistance to ozone cracking under static conditions. ISO 4674:1977, Fabrics coated with rubber or plastics Determination of tear resistance. ISO 4675:1990, Rubber- or plastics-coated fabrics Low temperature bend

27、 test. ISO 4892-2:1994, Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc sources. ISO 4892-4:1994, Plastics Methods of exposure to laboratory light sources Part 4: Open-flame carbon-arc lamps. ISO 5470:1980, Rubber or plastics coated fabrics Determination of abrasion resist

28、ance. ISO 5978:1990, Rubber- or plastics-coated fabrics Determination of blocking resistance. BSISO15372:20002 ISO 7854:1995, Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing. International Convention for the Safety of Life at Sea, 1974 (SOLAS 1974), as amended in

29、1996. IMO Resolution MSC.48(66), Adoption of the International Life-Saving Appliance (LSA) Code. IMO Resolution A.689(17)(as amended), Recommendation on Testing of Life-Saving Appliances. 3 General requirements 3.1 Coated fabric 3.1.1 Coated fabric for use in the construction of inflatable chambers

30、of rescue boats shall conform to the performance requirements specified in Table 1 when type tested in accordance with the specified test procedures in clause 6. 3.1.2 Type approval of a fabric applies only to a particular colour or range of colours as tested. 3.2 Base fabric The base fabric shall b

31、e inherently rot-proof. NOTE Cotton fabric is not considered to be rot-proof. 3.3 Coating material Coating materials shall be synthetic elastomeric or plastomeric compounds formulated to conform to the relevant performance requirements specified in Table 1. 3.4 Adhesives and welding Coated fabrics c

32、omplying with this International Standard are suitable for use in the manufacture of inflatable rescue boats using adhesives and/or thermal-welding techniques consistent with the fabric manufacturers instructions. Manufacturers of rescue boats should confer with fabric proofers concerning specific f

33、abrication techniques for specific coated fabrics. BSISO15372:2000 3 Table 1 Performance requirements Property Performance criteria Test procedure Tensile strength Not less than 3,5 kN/50 mm width. 6.2.1 Elongation Elongation at break to be not more than 35 %. 6.2.1 Tear strength: method 6.2.2.1 met

34、hod 6.2.2.2 Not less than 140 N. Not less than 1 500 N. 6.2.2 Ageing resistance No stickiness, brittleness, cracks or any other deterioration. Tensile strength after ageing shall be not less than 90 % of that before ageing. The difference in dimensions before and after ageing shall be not more than

35、2 %. 6.2.3 Seam strength In the tensile test, the break shall occur at a load of at least 85 % of the strength recorded in the tensile test, but not less than 3,5 kN/50 mm width. 6.2.4 Oil resistance Free of tackiness or any other deterioration. 6.2.5 Cold resistance No visible cracking under 5 magn

36、ification. 6.2.6 Coating adhesion Not less than 50 N/25 mm width. 6.2.7 Resistance to flex cracking No cracking or deterioration after 200 000 cycles. 6.2.8 Airtightness No bubbles after 5 min. 6.2.9 Ozone resistance No visible cracking under 5 magnification. 6.2.10 Sea-water resistance No peeling a

37、nd colour fading. In the tensile test, the break shall occur at a load of at least 85 % of the strength recorded in the tensile test, but not less than 3,5 kN/50 mm width. 6.2.11 Hydrolysis resistance (thermoplastic- coated fabrics only) Coating adhesion and weld strength after exposure shall be not

38、 less than 70 % of that before exposure. When subjected to the blocking resistance test, the 100 g weight shall not be lifted. After folding, there shall be no visible cracks, ply separation, brittleness or stickiness. 6.2.12 Blocking resistance Resistance rating no greater than 2. 6.2.13 Ultraviole

39、t resistance (weathering) No cracking when bent, heavily coated side out, over a 3,2 mm diameter mandrel after exposure. Tensile strength after exposure shall be not less than 90 % of that before exposure. 6.2.14 Abrasion resistance After 500 revolutions of the test-piece holder, the base fabric sha

40、ll not be visible, and the abrasion shall not exceed 0,7 mg/revolution. 6.2.15 Mass per unit area As required by manufacturers specification. 6.2.16 BSISO15372:20004 4 Testing of production fabrics 4.1 Routine production tests Coated fabrics for use in the manufacture of inflatable chambers of rescu

41、e boats shall be tested periodically for the following properties: tensile strength and elongation; tear strength; ageing resistance; oil resistance; cold resistance; coating adhesion; air-tightness; mass per unit area. 4.2 Other production tests The remaining tests in Table 1 shall be performed les

42、s frequently. 4.3 Frequency of production tests The minimum frequency of production testing shall be as specified in the individual material specification. 5 Marking The coated fabric shall be marked in such a manner as to allow traceability of the fabric manufacturer and production-lot number. 6 Ap

43、proval-testing procedures 6.1 General conditions for tests 6.1.1 Standard test atmospheres Unless otherwise specified, the test atmospheres shall be at a temperature of 20 C 2 C and a relative humidity of (65 5) %. The temperature, humidity and atmospheric pressure at the time of the test shall be r

44、ecorded. 6.1.2 Conditioning of test specimens The test specimens shall have been vulcanized, if applicable, for not less than 24 h and not more than 3 months and shall be kept under the standard atmosphere for at least 24 h prior to test. BSISO15372:2000 5 6.1.3 Test specimens The required number of

45、 test specimens shall be taken from the effective width of the coated fabric well away from the selvedges and the ends, and in both directions parallel to the warp and to the weft. 6.2 Test procedures 6.2.1 Tensile test 6.2.1.1 This test shall be carried out to determine tensile strength and elongat

46、ion concurrently with breaking. The test shall be performed in accordance with the method specified in ISO 1421, with dry specimens, using a constant rate of traverse (CRT) machine. 6.2.1.2 The specimens shall be tested at a tensile speed of (100 10) mm/min. 6.2.2 Tear test Two alternative test meth

47、ods, the constant rate of traverse method (6.2.2.1) or the wound test method (6.2.2.2) may be used for the tear test, at the discretion of the national administration. 6.2.2.1 Constant rate of traverse method 6.2.2.1.1 The test shall be performed in accordance with Method A Constant rate of tear, sp

48、ecified in ISO 4674:1977. 6.2.2.1.2 Five test specimens shall be cut parallel to the warp and five to the weft. The test specimens shall be the so-called trouser-shaped test pieces of Method A2 specified in ISO 4674:1977: a rectangular strip (225 0,5) mm by (75 0,5) mm wide, with a longitudinal slit

49、 80 mm long beginning from the middle of the width. 6.2.2.1.3 Place the test specimens symmetrically in the grips with one tongue in each of the grips, with the uncut end of the test specimen remaining free. Ensure that each tongue is fixed in a grip so that the beginning of the tear is parallel to the direction in which the tearing force is applied. 6.2.2.1.4 The test shall be carried out at a tensile sp