BS ISO 14817-1-2015 Intelligent transport systems ITS central data dictionaries Requirements for ITS data definitions《智能运输系统 ITS中央数据字典 ITS数据定义的要求》.pdf

《BS ISO 14817-1-2015 Intelligent transport systems ITS central data dictionaries Requirements for ITS data definitions《智能运输系统 ITS中央数据字典 ITS数据定义的要求》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 14817-1-2015 Intelligent transport systems ITS central data dictionaries Requirements for ITS data definitions《智能运输系统 ITS中央数据字典 ITS数据定义的要求》.pdf（78页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS ISO 14817-1:2015Intelligent transport systems ITS central data dictionariesPart 1: Requirements for ITS data definitionsBS ISO 14817-1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 14817-1:2015.The UK participation in its prep

2、aration was entrusted to TechnicalCommittee EPL/278, Intelligent transport systems.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its co

3、rrectapplication. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 87409 3ICS 03.220.01; 35.240.60Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy

4、 and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 14817-1:2015 ISO 2015Intelligent transport systems ITS central data dictionaries Part 1: Requirements for ITS data definitionsSystmes intelligents de transport Dictionnaires d

5、e donnes centrales des ITS Partie 1: Exigences pour les dfinitions des donnes des ITSINTERNATIONAL STANDARDISO14817-1First edition2015-10-15Reference numberISO 14817-1:2015(E)BS ISO 14817-1:2015ISO 14817-1:2015(E)ii ISO 2015 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2015, Published in Swit

6、zerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be re

7、quested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 14817-1:2015ISO 14817-1:2015(E)Foreword vIntro

8、duction vi1 Scope . 12 Conformance . 13 Normative references 24 Terms and definitions . 25 Symbols and abbreviated terms . 96 Data concepts 106.1 Summary of data concepts . 106.2 Documentation Data Concepts . 126.2.1 Dictionary Document 136.2.2 Module . 136.3 Data model Data Concepts . 136.3.1 Objec

9、t class 146.3.2 Data element 146.3.3 Value domain 156.4 Interface Data Concepts . 156.4.1 Interface dialogue 166.4.2 Message. 176.4.3 Data frame 176.4.4 Aggregate domain 177 Meta-attributes .177.1 Identification and naming meta-attributes . 177.1.1 Data concept identifier 177.1.2 Data concept versio

10、n .187.1.3 Data concept revision .187.1.4 Nominal version 187.1.5 Document identifier .187.1.6 Contextual name .197.1.7 Descriptive name 197.1.8 Historic descriptive name . 197.1.9 ASN.1 name 197.1.10 Historic ASN.1 name 197.1.11 Object identifier .197.1.12 Uniform resource locator 197.2 Definitiona

11、l meta-attributes . 207.2.1 Definition . 207.2.2 Source . 207.2.3 Data concept type .207.2.4 Remark 207.2.5 Context . 207.2.6 Dialogue Order Rules 207.3 Relational meta-attributes . 207.3.1 Parent object class .217.3.2 Precursor . 217.3.3 Successor . 217.3.4 Synonym . 217.3.5 Abstract . 217.3.6 Mult

12、iplicity .217.3.7 Superclass .217.3.8 Referenced message.217.3.9 Referenced data frame .21 ISO 2015 All rights reserved iiiContents PageBS ISO 14817-1:2015ISO 14817-1:2015(E)7.3.10 Referenced data element . 217.4 Representational meta-attributes . 227.4.1 Data type 227.4.2 Format 237.4.3 Unit of mea

13、sure 247.4.4 Valid value rule .247.4.5 Constraint 24Annex A (normative) Meta-attribute requirements 25Annex B (normative) Naming conventions .29Annex C (normative) Preferred data concepts 35Annex D (informative) Data models .47Annex E (informative) Legacy data 55Bibliography .64iv ISO 2015 All right

14、s reservedBS ISO 14817-1:2015ISO 14817-1:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each me

15、mber body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International E

16、lectrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different type

17、s of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be h

18、eld responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is informati

19、on given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the fo

20、llowing URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 204, Intelligent transport systems.This first edition of ISO 14817-1, together with ISO 14817-2, cancels and replaces ISO 14817:2002, which has been technically revised.ISO 14817 consists of the fo

21、llowing parts, under the general title Intelligent transport systems ITS data dictionaries: Part 1: Requirements for ITS data definitions Part 2: Governance of the Central ITS Data Concept Registry Part 3: Object identifier assignments for ITS data concepts ISO 2015 All rights reserved vBS ISO 14817

22、-1:2015ISO 14817-1:2015(E)IntroductionBackgroundThis International Standard has been developed by ISO TC 204, in order to provide a framework for the documentation and registration of data that passes through system interfaces within the intelligent transport systems (ITS) domain. It is designed to

23、maximize interoperability and facilitate information re-use across system interfaces.Vision statementThis International Standard envisions a harmonized approach to ITS data concepts to promote maximum interoperability of data within the ITS sector by the creation and maintenance of the “Central ITS

24、Data Concept Registry” (CIDCR), supported by interface and application specific ITS data dictionaries, created and maintained in a common and interoperable form, and to ensure the minimization of duplication by clear rules for data concept definition and data concept registry management.Mission stat

25、ementThe mission is to develop tools that will promote a holistic, integrated approach involving vehicle technology, infrastructure, and the road user to increase transport safety and efficiency. Specifically, this International Standard defines the principles and concepts; scope; field of applicati

26、on; rules and procedures; definition and concept of operation for the CIDCR and ITS functional data dictionaries; and makes provision for the migration of data concepts from ITS functional data dictionaries to the CIDCR so as to maximize interoperability and minimize proliferation of similar (but in

27、consistently defined) data concept entries.This International Standard defines the framework, formats, and procedures used to define information and information exchanges within the ITS sector. This International Standard is designed to be used by the ITS community at large, but should be of special

28、 interest to application developers, equipment providers, and data concept registry managers.This International Standard specifies a set of meta-attributes for ITS data concepts, as well as associated conventions and schemes that enable the description, standardization and management of all exchange

29、d ITS data. Through consistent use of these common structures and associated conventions and schemes, interchange of data and information among the various ITS functional subsystems via their specific application systems can be maximized. This International Standard also supports re-use of data elem

30、ents and other data concepts across various ITS functional subsystems and their specific application systems.The formats and processes defined within this International Standard are consistent with implementation(s) of the ISO ITS System Architecture defined in the ISO 14813 Standardization delivera

31、bles, particularly ISO 14813-2 and ISO 14813-3. This does not preclude the application of data concept registries using alternative international, regional or national system architecture methodologies or techniques, indeed, common formats and processes will ease migration and interoperability betwe

32、en such approaches.The ITS data concepts that populate the CIDCR or data dictionary may originate from a Computer-Aided Software Engineering (CASE) tool implementation of the ISO 14813 ITS Reference Architecture, from International Standards for ITS, from national implementations for ITS, or from th

33、e submission by relevant users. Data dictionary entries are not limited to those generated by object oriented methodologies.Document overviewThis clause provides an overview of this International Standard. Clause 1 identifies the scope of this part of ISO 14817. Clause 2 identifies requirements for

34、conformance to this part of ISO 14817. Clause 3 identifies references required for proper implementation of this part of ISO 14817. Clause 4 defines terms used in this part of ISO 14817 and Clause 5 lists the abbreviations.vi ISO 2015 All rights reservedBS ISO 14817-1:2015ISO 14817-1:2015(E)Clause 6

35、 declares the fundamental ITS data concepts and Clause 7 identifies meta-attributes used to document the data concepts declared in Clause 6.Annex A prescribes which meta-attributes are required for each type of data concept. Annex B specifies the naming conventions and the process for converting amo

36、ng various naming conventions (e.g. between the ITS descriptive name and the ASN.1 name). Annex C contains a listing of preferred data concepts within the ITS domain. Annex D contains the rules for representing data in a data model, along with examples.The Bibliography includes a list of documents r

37、elated to this International Standard.Other partsISO 14817-2 defines the operation of the Central ITS Data Concept Registry (CIDCR). ISO 14817-3 specifies how to assign object identifiers. ISO 2015 All rights reserved viiBS ISO 14817-1:2015BS ISO 14817-1:2015Intelligent transport systems ITS central

38、 data dictionaries Part 1: Requirements for ITS data definitions1 ScopeThis part of ISO 14817 specifies the logical structure (framework) and the data content (substance) of intelligent transport systems (ITS) data dictionaries (DDs).Specifically, this part of ISO 14817 specifies the following: fram

39、ework used to identify and define all data concepts; meta-attributes used to describe, standardize and manage each of the data concepts defined within this framework; requirements used to record these definitions; naming conventions for the data concepts; a set of preferred data concepts within the

40、ITS domain; data modelling method for defining ITS data concepts, when used.DDs support data concepts derived from any number of international, regional or national system architecture methodologies and/or techniques. Common data formats and operating procedures will ease migration and interoperabil

41、ity between such approaches.A data concept registry is an electronic data dictionary that supports some additional features. The CIDCR refers to the specific implementation of an ITS data concept registry that is operated under the auspices of ISO/TC 204. The term “data concept registries” may refer

42、 to the CIDCR and/or any other national or regional data concept registry that chooses to conform to this part of ISO 14817.2 ConformanceThis part of ISO 14817 prescribes a conceptual model, not a physical implementation. An implementation of this part of ISO 14817 may use different data concepts, d

43、ifferent meta-attributes, or different data concepts and different meta-attributes; however, a conforming implementation of this part of ISO 14817 shall provide an unambiguous mapping to and from the physical implementation model and the conceptual meta-model defined by this part of ISO 14817.Region

44、al and National DDs have the option of adopting data concept definitions from the CIDCR, but are not required to do so.Table 1 indicates the conformance requirements of data concept registries and data dictionaries.INTERNATIONAL STANDARD ISO 14817-1:2015(E) ISO 2015 All rights reserved 1BS ISO 14817

45、-1:2015ISO 14817-1:2015(E)Table 1 Data dictionary and data concept registry conformanceaFeature Data Dictionary Data Concept RegistrybSupport all data conceptsc Support all mandatory identification meta-attributesd Support all mandatory definitional meta-attributese Support all mandatory relational

46、meta-attributesf Support all mandatory representational meta-attributesg Support all mandatory administrative meta-attributeshElectronic storage with automated administrative rulesiaAnnex A identifies which meta-attributes are mandatory for specific data concepts.bFor data concept registries, “manda

47、tory” meta-attributes shall also include all “assigned” meta-attributes.cAs defined in Clause 6.dAs defined in 7.1.eAs defined in 7.2.fAs defined in 7.3.gAs defined in 7.4.hAs defined in ISO 14817-2.iAs defined in ISO 14817-2.3 Normative referencesThe following documents, in whole or in part, are no

48、rmatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 14817-3:1), Intelligent transport systems ITS data dicti

49、onaries Part 3: Object identifier assignments for ITS data conceptsISO/IEC 8824-1:2), Information technology Abstract Syntax Notation One (ASN.1): Specification of basic notationISO/IEC 9834-1, Information technology Procedures for the operation of object identifier registration authorities: General procedures and top arcs of the international object identifier treeNIMA TR8350.2, Third Edition Amendment 1, January 2000, Department of Defence World Geodetic System 1984, Its Definition and Relationships With L