BS ISO 14134-2006 Optics and optical instruments - Specifications for astronomical telescopes《光学和光学仪器 天文望远镜规范》.pdf

《BS ISO 14134-2006 Optics and optical instruments - Specifications for astronomical telescopes《光学和光学仪器 天文望远镜规范》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 14134-2006 Optics and optical instruments - Specifications for astronomical telescopes《光学和光学仪器 天文望远镜规范》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58astronomical telescopesICS 37.020Optics and optical instruments Specifications for BRITISH STANDARD

2、BS ISO 14134:2006BS ISO 14134:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 September 2006 BSI 2006ISBN 0 580 49032 7Amendments issued since publicationAmd. No. Date Commentscontract. Users are responsible for its correct application

3、.Compliance with a British Standard cannot confer immunity from legal obligations.National forewordThis British Standard was published by BSI. It is the UK implementation of ISO 14134:2006.The UK participation in its preparation was entrusted to Technical Committee CPW/172, Optics and photonics.A li

4、st of organizations represented on CPW/172 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a INTERNATIONALSTANDARDISO14134First edition2006-08-15Reference numberISO 14134:2006(E)Optics and optical instruments Specifications for

5、 astronomical telescopesOptique et instruments doptique Spcifications pour tlescopes astronomiquesBS ISO 14134:2006iiiiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies(ISO member bodies). The work of preparing International Stan

6、dards is normally carried out through ISOtechnical committees. Each member body interested in a subject for which a technical committee has beenestablished has the right to be represented on that committee. International organizations, governmental andnon-governmental, in liaison with ISO, also take

7、 part in the work. ISO collaborates closely with the InternationalElectrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to

8、prepare International Standards. Draft International Standardsadopted by the technical committees are circulated to the member bodies for voting. Publication as anInternational Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that

9、some of the elements of this document may be the subject of patentrights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 14134 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee SC 4,Telescopic systems.BS ISO 14134:2006blank1Optics

10、 and optical instruments Specifications for astronomical telescopes1ScopeThis International Standard applies to astronomical telescopes, including finder telescopes, and to theirfunctional specifications.These specifications are restricted to amateur astronomical telescopes, which should be distingu

11、ished fromhand-held or mounted general purpose monocular telescopes.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For datedreferences, only the edition cited applies. For undated references, the latest edition of the referenced docum

12、ent(including any amendments) applies.ISO 68-1, ISO general purpose screw threads Basic profile Part 1: Metric screw threadsISO 10109-4:2001, Optics and optical instruments Environmental requirements Part 4: Test requirementsfor telescopic systemsISO 14132-1, Optics and optical instruments Vocabular

13、y for telescopic systems Part 1: General terms andalphabetical indexes of terms in ISO 14132ISO 14132-4, Optics and optical instruments Vocabulary for telescopic systems Part 4: Terms forastronomical telescopesISO 14490-4, Optics and optical instruments Test methods for telescopic systems Part 4: Te

14、st methodsfor astronomical telescopes3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 14132-1and ISO 14132-4 shall apply.4 Specifications4.1 Optical characteristics: values and tolerancesThe values and tolerances for optical characteristics of astronom

15、ical telescopes are specified in Table 1.The characteristics specified in Table 1 shall be measured in accordance with ISO 14490-4.BS ISO 14134:20062Tolerances for clear aperture and focal length of the objective lens (primary mirror); focal length of the eyepiece;clear aperture, magnification and a

16、ngular field of view in objective space of the finder telescope shall beobtained by taking nominal values as reference.The magnification and field of view in the object space of a finder telescope provided with a dioptreadjustment mechanism shall be assessed at 0-setting of the dioptre scale. Wherev

17、er no dioptre adjustmentmechanism is provided, the magnification of the finder shall be checked when the finder is focused to infinity.4.2 Mechanical requirements4.2.1 The moving parts shall operate smoothly and reliably. Excessive oiling shall not be used, and parts otherthan moving parts shall not

18、 be contaminated with oil or grease.4.2.2 An astronomical telescope shall not change collimation in any position.4.2.3 An astronomical telescope provided with a finder telescope shall have an adjustment device in order tobring the optical axis of the finder within 1/2 of the real visual angle of the

19、 main telescope when the maintelescope is set to maximum magnification.NOTE Maximum magnification is defined as the value obtained when the exit pupil diameter is .4.2.4 The eyepiece of a finder telescope with a dioptre adjustment mechanism shall be capable of adjusting inthe range of to or higher.F

20、or finders without a dioptre adjustment mechanism, the eyepiece shall be fixed to .4.2.5 A mounting that supports an astronomical telescope shall always be made robust and stable. For anequatorial-type mounting the polar axis and the declination axis shall be at right angles to each other. When anyk

21、ind of accessory is attached to the lens-barrel or eyepiece side, the point of intersection of the axes shall stayin balance, or be capable of being rebalanced in a simple manner.In an alt-azimuth telescope-type mounting, the plane including the altitude axis and the horizontal plane againstthe azim

22、uth axis shall be mutually perpendicular. When any kind of accessory is attached to the lens-barrel oreyepiece side, the altitude axis shall keep the balance.Table 1 Optical characteristics: values and tolerancesTelescope Item Characteristics value or toleranceMainClear aperture of objective (mm)Ref

23、ractiveReflectiveFocal length of objective (mm)RefractiveReflectiveFocal length of eyepiece (mm)Angular resolution in object space and on the optical axis(arc second)general purpose high performanceFinderMagnificationClear aperture of objective (mm)Field of view in the object space (degrees)Reticle

24、parallax (dioptre )Angular resolution on the optical axis (arc second)NOTE 1 The resolution on the optical axis is used as a criterion for image quality.NOTE 2 = clear aperture of the objective in millimetres.NOTE 3 = magnification of the finder.1,02,02%3%5%140D120D10 %1,05%= m10,5100D1mm+2m14m11m1B

25、S ISO 14134:200634.2.6 All rotary axes of the mounting which support an astronomical telescope shall operate smoothly, inparticular, the fine adjustment devices shall be free from squeak, play and unevenness.4.2.7 All accessories shall be easily exchangeable.4.2.8 The bases of a tripod or pillar-typ

26、e support, using suitable materials for strength, shall be robust andefficient in operation of the telescope and in observation.4.2.9 Driving mechanisms of the polar and declination axes (in the equatorial telescope) and of the altitudeand azimuth axes (in the alt-azimuth telescope) which use electr

27、ic motor drives shall be smooth and precise inoperation.4.3 Interfaces for accessories4.3.1 GeneralEyepieces and other accessories shall be interchangeable by means of suitable interfaces.4.3.2 Sleeve-fitting type interfaceEyepieces of the sleeve-fitting type shall have one of the following outer ba

28、rrel diameters and tolerances(in mm):The sleeve-fitting type interface shall be provided with a clamp or a friction drop-preventing device.4.3.3 Screw-in type interfaceA screw-in type interface shall be provided with the external screw in accordance with ISO 68-1 fora camera body.4.4 Optical require

29、ments4.4.1 For the purpose of solar observation, in order to prevent eye injury, a safety device such as a solarprojection plate, a solar objective filter, or a Herschel wedge shall be available. Solar eyepiece filters shall not beprovided with the telescope or supplied as accessories.4.4.2 Measures

30、 shall be taken to minimize the intensity of internal reflections and flares in the telescope tube,eyepiece tube and eyepiece subsidiary tube.4.4.3 The optical components shall exhibit no mechanical damage (scratches, chips), contamination, stain orinhomogeneity.A minor quantity of small bubbles and

31、 striae are permissible, provided they do not impair the performance.4.4.4 The scale lines of the reticle of the finder telescope shall be free from broken lines.4.5 Environmental requirementsAstronomical telescopes shall withstand the test conditions prescribed for instruments type 06 or 07 inaccor

32、dance with ISO 10109-4:2001.24,500,131,7500,150,800,1M42 0,75BS ISO 14134:200645 Consumer information5.1 Designation and markingAn astronomical telescope and its components or accessories shall have the designations and markings listedin Table 2.5.2 Product informationProduct catalogues, user manual

33、s and other technical information brochures for astronomical telescopes shallprovide complete information on at least the technical characteristics listed in Table 3.Table 2 Designation and markingPart CharacteristicsDesignation and markingsrequired recommendedMain telescopeFocal length (mm)Clear ap

34、erture of objective (mm)Brand nameProduct nameCountry of originFinder telescopeaMagnificationEntrance pupil diameter (mm)Field of view (degrees)EyepieceTypeFocal length (mm)Each componentSerial numberBrand name or signaBasic designation for the finder scope is given by the combination of magnificati

35、on and diameter of entrance pupil e.g.: .Table 3 Product informationPart CharacteristicsDesignation and markingsrequired recommendedMain telescopeFocal length (mm)Clear aperture of objective (mm)Obscuration ratio of reflective telescopesa(%)Brand nameProduct nameCountry of originFinder telescopeMagn

36、ificationEntrance pupil diameter (mm)Field of view (degrees)EyepieceTypeFocal length (mm)Each componentInterface mechanical dimensionMass or weight (kg)Brand name or signaRatio of the diameter of the central obscuration to the diameter of the primary mirror.6 20BS ISO 14134:200655.3 ComplianceProduc

37、ts complying with the requirements given in this International Standard may be designated asastronomical telescopes in accordance with ISO 14134.BS ISO 14134:2006BS ISO BSI389 Chiswick High RoadLondonW4 4AL14134:2006BSI British Standards InstitutionBSI is the independent national body responsible fo

38、r preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or ed

39、itions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the i

40、nside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures thatsubscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publication

41、s should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that ha

42、ve been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also

43、available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of sta

44、ndards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is a

45、vailable on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reprodu

46、ced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, typ

47、e or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.