BS ISO 13765-1-2006 Refractory mortars - Determination of consistency using the penetrating cone method《耐熔灰浆 用渗透锥法测定一致性》.pdf

《BS ISO 13765-1-2006 Refractory mortars - Determination of consistency using the penetrating cone method《耐熔灰浆 用渗透锥法测定一致性》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 13765-1-2006 Refractory mortars - Determination of consistency using the penetrating cone method《耐熔灰浆 用渗透锥法测定一致性》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58ICS 81.080Refractory mortars Part 1: Determination of consistency using the penetrating cone method

2、BRITISH STANDARDBS ISO 13765-1:2004BS ISO 13765-1:2004This British Standard was published under the authority of the Standards Policy and Strategy Committee on 13 February 2006 BSI 13 February 2006ISBN 0 580 47704 5The British Standards which implement international publications referred to in this

3、document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contra

4、ct. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 6, an insid

5、e back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsA list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesenq

6、uiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.National forewordThis British Standard reproduces verbatim ISO 13765-1:2004 and implements it as the UK national standard. Toge

7、ther with BS ISO 13765-2, BS ISO 13765-3, BS ISO 13765-4, BS ISO 13765-5 and BS ISO 13765-6, it supersedes BS 1902-11:1991 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PRI/1, Refractories, which has the responsibility to: aid enquirers to understand

8、 the text; present to the responsible international/European committee any INTERNATIONALSTANDARDISO13765-1First edition2004-06-01Reference numberISO 13765-1:2004(E)Refractory mortars Part 1:Determination of consistency using the penetrating cone methodMortiers rfractaires Partie 1: Dtermination de l

9、a consistance par la mthode de pntration dun cneBS ISO 13765-1:2004iiiiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies(ISO member bodies). The work of preparing International Standards is normally carried out through ISOtechnic

10、al committees. Each member body interested in a subject for which a technical committee has beenestablished has the right to be represented on that committee. International organizations, governmental andnon-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with

11、 the InternationalElectrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft Internati

12、onal Standardsadopted by the technical committees are circulated to the member bodies for voting. Publication as anInternational Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the

13、 subject of patentrights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 13765-1 was prepared by Technical Committee ISO/TC 33, Refractories.ISO 13765 consists of the following parts, under the general title Refractory mortars: Part 1: Determination of consistenc

14、y using the penetrating cone method Part 2: Determination of consistency using the reciprocating flow table method Part 3: Determination of joint stability Part 4: Determination of flexural bonding strength Part 5: Determination of grain size distribution (sieve analysis) Part 6: Determination of mo

15、isture content of ready-mixed mortarsBS ISO 13765-1:2004ivblank1Refractory mortars Part 1:Determination of consistency using the penetrating cone method1ScopeThis part of ISO 13765 describes a method for the determination of the consistency of refractory mortars usinga penetrating cone.2 Normative r

16、eferencesThe following referenced documents are indispensable for the application of this document. For datedreferences, only the edition cited applies. For undated references, the latest edition of the referenced document(including any amendments) applies.ISO 8656-1, Refractory products Sampling of

17、 raw materials and unshaped products Part 1: Samplingscheme3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1 refractory mortarfinely ground refractory composition which, generally after the addition of water or other specified mixed liquid,is use

18、d for laying and jointing bricksNOTE 1 The refractory components are related to the quality of the bricks with which the composition is to be used.NOTE 2 In some cases the mortar may be supplied in a ready-mixed state.3.2 consistency of refractory mortarsmeasure of the viscosity of the material in i

19、ts ready-to-use state4 PrincipleThe consistency of a refractory mortar is assessed by the depth of penetration of a specified cone into thesample.5 Apparatus5.1 Consistency determination device, consisting of a penetrometer, a cone and a container for the sample.The penetrometer is shown in Figure 1

20、. The requirements for the cone and the sample container are given in5.1.1 and 5.1.2.BS ISO 13765-1:200425.1.1 Cone.The cone shall be made of brass or corrosion-resistant steel with a smooth, polished surface. It shall be of thedimensions shown in Figure 2, and shall be machined such that the mass o

21、f the cone and drop rod is. The cone shall be tightly fitted with no shoulder at the joint to a needle tip made of quench-hardened steel or stainless steel.Key1 gauge plate2 toothed lever3buton4 drop rod5 reflector6 standard coneNOTE Reflecor may or may not be used.Figure 1 Penetrometer150 g 0,25 gB

22、S ISO 13765-1:200435.1.2 Sample container, a cylinder of internal diameter and depth.5.2 Mixer, (see Figure 3) consisting of a stainless steel bowl and a metal blade.Dimensions in millimetresKey1 stainless steel drop rod2 needle tip (made of quench-hardened steel or stainless steel)aMachine to desir

23、ed mass.bBrass or corrosion-resistant steel.cSmooth and polished surface.dTight fit.eNo shoulder, i.e. smooth transition.Figure 2 Penetrometer cone100 mm 50 mmBS ISO 13765-1:200445.2.1 Stainless steel bowl, with a capacity of about 5 L and of the general shape and size shown in Figure 3,and provided

24、 with means by which it can be fixed securely to the mixer frame during mixing and by which theheight of the bowl in relation to the blade and, to some extent, the gap between blade and bowl can be finelyadjusted and fixed;5.2.2 Metal blade, of the general shape, size and tolerances shown in Figure

25、3, rotating about its own axis asit is driven in a planetary movement around the axis of the bowl by an electric motor at controlled rotationalfrequencies.The two directions of rotation shall be opposite and the ratio between the two frequencies shall not be a wholenumber.Where more than one mixer i

26、s used, blades and bowls shall form sets which are always used together. The gapbetween blade and bowl shown in Figure 3 shall be checked regularly depending on the frequency of use.NOTE The gap indicated in Figure 3 ( ) refers to the situation when the blade in the empty bowl is brought asclose as

27、possible to the wall. Simple tolerance gauges (feeler gauges) are useful where direct measurement is difficult.5.3 Balance, having a maximum weighing capacity of and capable of weighing to the nearest .5.4 Measuring cylinder, capable of measuring to the nearest .5.5 Thermometer, capable of measuring

28、 to the nearest .Dimensions in millimetresKey1 bowl2bladeFigure 3 Mixer blade and bowl3mm 1mm6kg 1g5ml1CBS ISO 13765-1:200456 SamplingFor dry mortar, sample the mortar in accordance with ISO 8656-1 or as agreed between parties. Reduce thesample to by quartering or with a riffle sampler.Sample ready-

29、mixed mortars by emptying the entire contents of the container in which the mortar is suppliedinto another container of larger capacity and mixing thoroughly. It is important that any supernatant liquid not bediscarded. Ensure that a representative sample of the wet mixture is obtained.7 Procedure7.

30、1 For dry mortars, place the mortar in the mixer and add water (or the specified mixing liquid) in accordancewith the manufacturers instructions and mix thoroughly. Note the quantity of liquid added. Allow the mixedmortar to stand for , unless any specific instructions are given by the manufacturer,

31、 in which case theseshould be followed. Ready-mixed mortar shall be tested in “as received” state.7.2 Measure the temperature of the mixed mortar to the nearest .7.3 Set the penetrometer vertically and attach a clean dry cone.7.4 Fill the sample container with the well-mixed mortar, level the surfac

32、e with a levelling rod and place it onthe test table.7.5 Adjust the position of the cone so that its tip is just in contact with the centre of the surface of the mortar inthe sample container. Lower the measuring gauge rod to contact the top of the drop rod and set the gauge tozero.7.6 Depress the s

33、tart (release) button and keep depressed for so that the cone can move freely. Releasethe button. Lower the toothed rod again to contact the top of the drop rod. Record the value on the measuringgauge scale to the nearest as the consistency of the mortar.7.7 Lift the toothed rod and cone. Clean the

34、cone. Repeat the operation described in 7.3 to 7.6.8CalculationCalculate the consistency as the mean value of the two tests to the nearest .In the case of dry mortars, calculate the percentage of the amount of water or mixing liquid added based on themass of the dry material.9 Test reportThe report

35、shall include the following information:a) all information necessary for identification of the material tested, including a description of the material,manufacturer, type, brand, batch number, etc.;b) a reference to this part of ISO 13765 (ISO 13765-1);c) the name of the testing establishment;d) in

36、the case of a dry mortar, the percentage of water (or specified liquid) added;e) the results of the test, i.e. the consistency as penetration to the nearest , including the results of theindividual determinations and their mean, calculated as specified in Clause 8;f) the ambient temperature at which

37、 the test was conducted;g) the temperature of the mixed mortar;h) any deviations from the procedure specified;5kg15 min1C5s0,1 mm0,1 mm0,1 mmBS ISO 13765-1:20046i) any unusual features (anomalies) observed during the test;j) the date of the test.BS ISO 13765-1:2004blankBS ISO BSI389 Chiswick High Ro

38、adLondonW4 4AL13765-1:2004BSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by am

39、endment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard

40、would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the l

41、atest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In res

42、ponse to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through

43、 its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI

44、 are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online acc

45、ess to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standard

46、ization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclud

47、e the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.