BS ISO 11365-2017 Petroleum and related products Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids《石油和相关产品 三芳基磷酸酯涡轮机控制液的维护要求和指南》.pdf

《BS ISO 11365-2017 Petroleum and related products Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids《石油和相关产品 三芳基磷酸酯涡轮机控制液的维护要求和指南》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 11365-2017 Petroleum and related products Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids《石油和相关产品 三芳基磷酸酯涡轮机控制液的维护要求和指南》.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、Petroleum and related products Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluidsBS ISO 11365:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 ISO 2017Petroleum and related products Requirements and guidance for the ma

2、intenance of triaryl phosphate ester turbine control fluidsPtrole et produits connexes Exigences et recommandations pour la maintenance des fluides de rgulation de turbines base desters phosphates de triaryleINTERNATIONAL STANDARDISO11365First edition2017-09Reference numberISO 11365:2017(E)National

3、forewordThis British Standard is the UK implementation of ISO 11365:2017. It supersedes DD ISO/TS 11365:2011, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee MCE/18/-/16, Hydraulic fluids.A list of organizations represented on this committee can be obt

4、ained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90153 9ICS 75.120Compliance with

5、a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS ISO 11365:2017 ISO 2017Petro

6、leum and related products Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluidsPtrole et produits connexes Exigences et recommandations pour la maintenance des fluides de rgulation de turbines base desters phosphates de triaryleINTERNATIONAL STANDARDISO11365

7、First edition2017-09Reference numberISO 11365:2017(E)BS ISO 11365:2017ISO 11365:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in

8、 any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Bl

9、andonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgBS ISO 11365:2017ISO 11365:2017(E)ii ISO 2017 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no

10、 part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs membe

11、r body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 749 09 47copyrightiso.orgwww.iso.orgISO 11365:2017(E)Foreword vIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 14 Descr

12、iption of triaryl phosphate ester fluids . 15 Health and safety precautions 25.1 Fluid handling 25.2 Waste disposal . 36 Fire hazards . 36.1 General points 36.2 Methods of extinguishing fires 37 Compatibility of materials 37.1 Seals, paints and gaskets 37.2 Electrical cable insulation . 48 Factors a

13、ffecting service life . 48.1 General . 48.2 System design. 48.3 System operating conditions 58.4 System maintenance 58.5 Fluid contamination . 58.5.1 General 58.5.2 Air . 58.5.3 Water 58.5.4 Particulates . 58.5.5 Mineral oil 68.5.6 Metal soaps . 68.5.7 Chlorinated materials 68.6 Fluid condition moni

14、toring 68.7 Fluid purification 68.8 Fluid top up 79 Delivery and storage . 710 Flushing the system . 711 Fluid sampling. 811.1 General . 811.2 Containers . 811.3 Sampling in service . 811.3.1 General 811.3.2 Sampling points 811.3.3 Precautions to be taken when sampling from a line . 911.3.4 Sampling

15、 from a tank or reservoir . 911.4 Sampling of fresh fluid . 911.5 Labelling 1012 Recommended procedures for fluid monitoring .1012.1 Appearance and colour . 1012.2 Water content 1112.3 Neutralization number (Acid number - AN) . 1212.4 Fluid cleanliness . 1212.5 Direct current resistivity (volume res

16、istivity) 13 ISO 2017 All rights reserved iiiContents PageBS ISO 11365:2017ISO 11365:2017(E)12.6 Chlorine content . 1312.7 Mineral oil content 1312.8 Viscosity . 1412.9 Air release 1412.10 Foaming 1413 Examination of new fluid 1513.1 Acceptance tests for new fluid 1513.2 Acceptance requirements afte

17、r installation of a new fluid charge .1614 Examination of used fluid 1614.1 General 1614.2 Trend analysis . 18Bibliography .19iv ISO 2017 All rights reservedBS ISO 11365:2017ISO 11365:2017(E)12.6 Chlorine content . 1312.7 Mineral oil content 1312.8 Viscosity . 1412.9 Air release 1412.10 Foaming 1413

18、 Examination of new fluid 1513.1 Acceptance tests for new fluid 1513.2 Acceptance requirements after installation of a new fluid charge .1614 Examination of used fluid 1614.1 General 1614.2 Trend analysis . 18Bibliography .19iv ISO 2017 All rights reserved ISO 11365:2017(E)ForewordISO (the Internati

19、onal Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been

20、 established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standa

21、rdization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordanc

22、e with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

23、any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorseme

24、nt.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL:

25、 www.iso.org/iso/foreword.htmlThis document was prepared by Technical Committee ISO/TC 28, Petroleum and related products, fuels and lubricants from natural or synthetic sources, Sub-committee SC 4, Classifications and specifications.This first edition of ISO 11365 cancels and replaces ISO/TS 11365:

26、2011. ISO 2017 All rights reserved vBS ISO 11365:2017ISO 11365:2017(E)IntroductionMany turbine manufacturers or electrical power utilities have standardized requirements for the maintenance of triaryl phosphate ester hydraulic control fluids in service. A comparison of these requirements has made it

27、 possible to develop this document. However, the recommendations given in this document are for guidance and should not be considered as absolute. When interpreting results and deciding action, account has to be taken of various factors such as the conditions of use, the type of equipment, and the g

28、eneral trend in fluid characteristics.vi ISO 2017 All rights reservedBS ISO 11365:2017ISO 11365:2017(E)IntroductionMany turbine manufacturers or electrical power utilities have standardized requirements for the maintenance of triaryl phosphate ester hydraulic control fluids in service. A comparison

29、of these requirements has made it possible to develop this document. However, the recommendations given in this document are for guidance and should not be considered as absolute. When interpreting results and deciding action, account has to be taken of various factors such as the conditions of use,

30、 the type of equipment, and the general trend in fluid characteristics.vi ISO 2017 All rights reserved Petroleum and related products Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluidsWARNING The use of this document may involve hazardous materials, opera

31、tions and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practice and determine the applicability of regulatory limitations prior to use.1 ScopeT

32、his document is applicable to the use of triaryl phosphate esters as fire-resistant fluids for turbine control and other hydraulic systems in power generation. These fluids fall under category HFDR of ISO 6743-41.This document is intended to: assist the power equipment operator to maintain the fluid

33、 in a condition that will ensure the safe and reliable operation of the turbine while maximizing fluid life; recommend procedures for examining consignments of new fluid and monitoring the fluid in use; provide information on the safe handling, storage and disposal of the fluid; offer background inf

34、ormation on the causes of fluid degradation.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest ed

35、ition of the referenced document (including any amendments) applies.ISO 3170, Petroleum liquids Manual samplingISO 3722, Hydraulic fluid power Fluid sample containers Qualifying and controlling cleaning methodsISO 4021, Hydraulic fluid power Particulate contamination analysis Extraction of fluid sam

36、ples from lines of an operating system3 Terms and definitionsNo terms and definitions are listed in this document. ISO and IEC maintain terminological databases for use in standardization at the following addresses: ISO Online browsing platform: available at http:/www.iso.org/obp IEC Electropedia: a

37、vailable at http:/www.electropedia.org/4 Description of triaryl phosphate ester fluidsTriaryl phosphates are complex mixtures of products produced from the reaction of phosphorus oxychloride with substituted phenols, for example xylenol or tertiarybutylphenol, and have been used as fire-resistant fl

38、uids in power generation applications for over 55 years. While the early fluids were INTERNATIONAL STANDARD ISO 11365:2017(E) ISO 2017 All rights reserved 1BS ISO 11365:2017ISO 11365:2017(E)neurotoxic as a result of the presence of tri-o-cresyl phosphate, the products in commercial use for about the

39、 past 35 years have been free from this component and have very low levels of neurotoxicity. Modern phosphate esters are manufactured to meet the stringent health and safety requirements of CEN/TR 144892. However, such requirements are subject to change and the fluid manufacturers should be contacte

40、d for the latest information. As with all chemicals, triaryl phosphates should be handled responsibly. The health and safety recommendations given in this document are intended to minimize exposure and to provide a margin of safety for workers handling these fluids.Triaryl phosphate ester fluids nor

41、mally have good resistance to oxidation, moderate to good air release and low foaming properties. However, they are sensitive to hydrolysis. These properties will, of course, slowly deteriorate during the life of the fluid. While some degradation can be tolerated without adverse effects on system pe

42、rformance, good monitoring procedures are necessary to determine when the properties have changed sufficiently to require action.ISO 100503is the standard for new triaryl phosphate ester hydraulic fluids when used in power generation applications.For further information on the composition and techni

43、cal performance of these fluids, the relevant technical literature available from the fluid manufacturers or suppliers should be consulted.5 Health and safety precautions5.1 Fluid handlingTriaryl phosphate ester fluids have extremely low vapour pressures and excellent stability, and under normal ope

44、rating conditions give off no harmful vapours. There have been no reports of toxic effects through continued exposure, where sensible handling precautions have been taken. However, when handling phosphate esters all personnel should be aware of the nature of the material they are handling and consid

45、er the recommendations set out below. Accidental swallowing of the fluid or inhalation of vapours at elevated temperatures, which are the main potential sources of entry into the body, can be harmful and should be avoided. In event of ingestion, medical attention should be sought immediately. Goggle

46、s should be worn at all times when the fluid is being handled or when working on hydraulic control or other systems containing the fluid. Eye splashes may cause severe irritation. If any fluid gets into the eyes, they should be irrigated with water as soon as possible and medical attention sought. W

47、hile the fluid is being handled, eating, drinking and smoking should be prohibited to prevent contamination of the lips and mouth. After handling the fluid, and before eating, drinking or smoking, the hands shall be thoroughly washed. Exposure to the skin normally represents minimal hazard and stand

48、ard sanitary practices will prevent any adverse health effects. No ill effects have been reported from short-term skin exposure. However, continuous exposure to degraded fluid, which is acidic, should be avoided. This can be achieved using suitable impermeable protective gloves or barrier creams. Pa

49、rticular attention should be paid to the thorough cleaning of the skin and removal of any soiled clothing if extensive and prolonged contact with the fluid occurs. If the fluid leaks on to hot pipework, white fumes may be emitted. If these are inhaled, they can cause irritation of the throat and lungs. Therefore, when working in an environment where fumes are being emitted, breathing apparatus should be worn.If required, further handling and safety information can be obtained from the fluid ma