BS ISO 10898-2016 Spot drills《定心钻》.pdf

《BS ISO 10898-2016 Spot drills《定心钻》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 10898-2016 Spot drills《定心钻》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BS ISO 10898:2016Spot drillsBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS ISO 10898:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 10898:2016.It supersedes BS 328-8:1992 which is withdrawn.The UK participation in its

2、preparation was entrusted to TechnicalCommittee MTE/18, Tools tips and inserts for cutting applications.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are r

3、esponsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 85778 2ICS 25.100.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStanda

4、rds Policy and Strategy Committee on 30 September 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS ISO 10898:2016 ISO 2016Spot drillsForets pointerINTERNATIONAL STANDARDISO10898Second edition2016-09-15Reference numberISO 10898:2016(E)BS ISO 10898:2016ISO 10898:2016(E

5、)ii ISO 2016 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2016, Published in SwitzerlandAll rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or postin

6、g on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.ISO copyright officeCh. de Blandonnet 8 CP 401CH-1214 Vernier, Geneva, SwitzerlandTel. +41 22 749 01 11Fax +41 22 7

7、49 09 47copyrightiso.orgwww.iso.orgBS ISO 10898:2016ISO 10898:2016(E)Foreword iv1 Scope . 12 Normative references 13 Dimensions . 14 Technical specifications 14.1 Conception 14.2 Permissible division deviation on flutes . 14.3 Maximum runout of the fluted part with respect to the shank . 15 Designat

8、ion 1Annex A (informative) Relationship between designations of this International Standard and ISO 13399 . 3Bibliography 4 ISO 2016 All rights reserved iiiContents PageBS ISO 10898:2016ISO 10898:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of nat

9、ional standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Interna

10、tional organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intend

11、ed for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.i

12、so.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document wil

13、l be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressi

14、ons related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 29, Small tools, Subc

15、ommittee SC 9, Tools with defined cutting edges, cutting items.This second edition cancels and replaces the first edition (ISO 10898:1992), of which it constitutes a minor revision with the following changes: Annex A has been added; a Bibliography has been added.iv ISO 2016 All rights reservedBS ISO

16、 10898:2016INTERNATIONAL STANDARD ISO 10898:2016(E)Spot drills1 ScopeThis International Standard specifies the dimensions and technical specifications of spot drills of high-speed steel and hardmetal with a point angle of 90 or 120.2 Normative referencesThe following documents, in whole or in part,

17、are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 286-2, Geometrical product specifications (GPS) IS

18、O code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts3 DimensionsSee Figure 1 and Table 1.4 Technical specifications4.1 ConceptionSpot drills in accordance with this International Standard shall be made without lands and b

19、ack taper.4.2 Permissible division deviation on flutesSee Table 2.4.3 Maximum runout of the fluted part with respect to the shankSee Table 2.5 DesignationSpot drills in accordance with this International Standard shall be designated by the following:a) “Spot drill”;b) a reference to this Internation

20、al Standard;c) its point angle;d) its diameter, d, in millimetres.EXAMPLE A spot drill of diameter d = 10 mm and point angle 90 is designated as follows:Spot drill ISO 10898 - 90 - 10 ISO 2016 All rights reserved 1BS ISO 10898:2016ISO 10898:2016(E)Figure 1Table 1Dimensions in millimetresd h8a4 6 8 1

21、0 12 16 20L 52 66 79 89 102 115 131l 12 20 25 25 30 35 40aSee ISO 286-2.Table 2Dimensions in millimetresdPermissible division deviation on flutesMaximum runout of the fluted part with respect to the shank4; 6 0,03 0,038; 10 0,04 0,0412; 16; 20 0,05 0,052 ISO 2016 All rights reservedBS ISO 10898:2016

22、ISO 10898:2016(E)Annex A (informative) Relationship between designations of this International Standard and ISO 13399For the relationship between the designations of this International Standard and preferred symbols according to ISO 13399, see Table A.1.Table A.1 Relationship between designations of

23、 this International Standard and ISO 13399Symbol in this International StandardReference in this International StandardProperty name in the ISO 13399 seriesSymbol in the ISO 13399 seriesReference in the ISO 13399 seriesdFigure 1 Table 1Cutting diameter DC 71D084653E57FLFigure 1 Table 1Overall length

24、 OAL 71D078EB7C086lFigure 1 Table 1Length chip flute LCF 71DCCC27DEF53 Clause 5 Point angle SIG 71DCCC4FEF366 Connection diameter machine sideDCONMSa71EBDBF5060E6aDCONMS has the same size as d (DC) in Figure 1. ISO 2016 All rights reserved 3BS ISO 10898:2016ISO 10898:2016(E)Bibliography1 ISO 13399 (

25、all parts), Cutting tool data representation and exchange4 ISO 2016 All rights reservedBS ISO 10898:2016BS ISO 10898:2016ISO 10898:2016(E) ISO 2016 All rights reservedICS 25.100.30Price based on 4 pagesThis page deliberately left blankBSI is the national body responsible for preparing British Standa

26、rds and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consum

27、ers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors

28、 choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou

29、 can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can

30、 be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies)

31、 and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or an

32、y portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on

33、 more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is f

34、or personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a su

35、bscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscrip

36、tion products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and rec

37、eive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revise

38、d or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soo

39、n as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an i

40、naccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20