BS ISO 10550-1994 Micrographics - Planetary camera systems - Test target for checking performance《缩微图形学 行星摄影机系统 检查性能试验目标》.pdf

《BS ISO 10550-1994 Micrographics - Planetary camera systems - Test target for checking performance《缩微图形学 行星摄影机系统 检查性能试验目标》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 10550-1994 Micrographics - Planetary camera systems - Test target for checking performance《缩微图形学 行星摄影机系统 检查性能试验目标》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 10550:1994 Implementation of ISO 10550:1994 Micrographics Planetary camera systems Test target for checking performance ICS 37.080.00BSISO 10550:1994 This British Standard, having been prepared under the directionof the Information andDocumentation Standards Policy Committee,

2、 was publishedunder the authority ofthe Standards Board and comesintoeffect on 15June1994 BSI 12-1999 The following BSI references relate to the work on this standard: Committee reference DOT/16 Draft for comments 90/96193 DC ISBN 0 580 23154 2 Committees responsible for this British Standard The pr

3、eparation of this British Standard was entrusted by the Information and Documentation Standards Policy Committee (DOT/-) to Technical Committee DOT/16, upon which the following bodies were represented: British Computer Society British Library British Office Technology Manufacturers Alliance British

4、Photographic Association Cranfield Imaging and Document Management User Group Her Majestys Stationery Office KODAK Limited Library Association London Borough of Bromley National Centre for Information Media and Technology (Cimtech) United Kingdom Association for Information and Image Management The

5、following body was also represented in the drafting of the standard, through subcommittees and panels: Public Record Office Amendments issued since publication Amd. No. Date CommentsBSISO 10550:1994 BSI 12-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword i

6、ii Text of ISO 10550 1BSISO 10550:1994 ii BSI 12-1999 National foreword This British Standard reproduces verbatim ISO10550:1994 and implements it as the UK national standard. This British Standard is published under the direction of the Information Documentation Standards Policy Committee whose Tech

7、nical Committee DOT/16 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate

8、them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from Customer Services, Publications, BSI, Linford Wood, Milton Keynes, MK146LE. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standard

9、s are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theISO title page, pagesii toiv, pages1 to4 and a back cover. Th

10、is standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.ISO 10550:1994(E) ii BSI 12-1999 Contents Page Foreword iii 1 Scope 1 2 Normative references 1 3 Creation and description of the test ta

11、rget 1 4 Methods 2 Annex A (informative) Examples of different types of original documents 4 Figure 1 Test target 2 Descriptors: Micrographics, reproduction (document), microforms, microfilm, image quality indicators, mire, performance evaluation.ISO 10550:1994(E) BSI 12-1999 iii Foreword ISO (the I

12、nternational Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISOtechnical committees. Each member body interested in a subject for which a technical committee h

13、as been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISOcollaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical

14、standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least75% of the member bodies casting a vote. International Standard ISO10550 was prepared by Technical

15、Committee ISO/TC171, Micrographics and optical memories for document and image recording, storage and use. Annex A of this International Standard is for information only.iv blankISO 10550:1994(E) BSI 12-1999 1 1 Scope This International Standard describes a test target for use in checking the perfor

16、mance of planetary camera systems. It specifies methods for a) checking the performance of the system; b) monitoring cameras in routine use. It applies to systems used to produce first-generation microforms that comply with ISO3272-1, ISO3272-2, ISO6199 or ISO9923. It does not apply to the productio

17、n of duplicates or hard copy. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parti

18、es to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 5-2:1991, Photography Density measureme

19、nts Part2: Geometric conditions for transmission density. ISO 5-3:1984, Photography Density measurements Part3: Spectral conditions. ISO 5-4:1983, Photography Density measurements Part4: Geometric conditions for reflection density. ISO 446:1991, Micrographics ISO character and ISO test chart No. 1 D

20、escription and use. ISO 2469:1977, Paper, board and pulps Measurement of diffuse reflectance factor. ISO 3272-1:1983, Microfilming of technical drawings and other drawing office documents Part1: Operating procedures. ISO 3272-2:1994, Microfilming of technical drawings and other drawing office docume

21、nts Part2: Quality criteria and control of35mm silver gelatin microfilms. ISO 3334:1989, Micrographics ISO resolution test chart No. 2 Description and use. ISO 6199:1991, Micrographics Microfilming of documents on16mm and35mm silver-gelatin type microfilm Operating procedures. ISO 9923:, Micrographi

22、cs TransparentA6 microfiche image arrangements 1) . 3 Creation and description of the test target 3.1 General The test target shall be adapted to the microfilming application used; it shall comprise the features described hereafter arranged as shown onFigure 1. The dimensions shall be in accordance

23、with the maximum size of the document that can be microfilmed with a given system at a given reduction ratio. ISO test charts No. 1 shall comply with ISO446 and ISO test charts No.2 shall comply with ISO3334. 3.2 Test target for reflected light exposure The test target shall be on an opaque base hav

24、ing a maximum reflection density of0,12 or having a minimum reflectance of75%. It shall comprise the following features: 3.2.1 five test charts (ISO No. 1 or ISO No. 2) located as follows: one at the centre of the test target and one on each of the half-diagonals, at a distance from the corner equal

25、 to10% of the length of the diagonal; 3.2.2 an indication of the reduction ratio used for filming the test target; 3.2.3 at least two of the density measuring patches listed below, each large enough to generate an area not less than2mm 2mm on the microimage: a spectrally neutral matt black patch wit

26、h a reflection density within the range1,25 to1,19 (reflectance within the range5,6 to6,4%), for all applications; a spectrally neutral matt grey patch with a reflection density within the range0,33 to0,28 (reflectance within the range47% to53%), for technical drawings; a spectrally neutral matt whi

27、te patch with a reflection density within the range of0,10 to0,07 (reflectance within the range80% to85%), for source documents; 3.2.4 a graduated metric scale, as long as the space available on the test target allows, of a width and contrast that permits easy measurement of the length of its microi

28、mage; 3.2.5 if necessary, lines, to check for possible optical distortions. All reflection density measurements shall be made in accordance with ISO5-3 and ISO5-4 and all reflectance measurements shall be made in accordance with ISO2469. 1) To be published.ISO 10550:1994(E) 2 BSI 12-1999 3.3 Test ta

29、rget for transmitted light exposure The transparent test target shall be on a spectrally neutral base having a maximum transmission density of0,12 or having a minimum transmittance of75%. It shall comprise the following features: 3.3.1 five test charts (ISO No. 1 or ISO No. 2), one located at the ce

30、ntre of the test target and one on each of the half-diagonals, at a distance from the corner equal to10% of the length of the diagonal; 3.3.2 an indication of the reduction ratio used for filming the transparent test target; 3.3.3 at least two of the density measuring patches listed below, each larg

31、e enough to generate an area not less than2mm 2mm on the microimage: a spectrally neutral black area with a transmission density within the range1,25 to1,19 (transmittance within the range5,6% to6,4%), for all applications; a spectrally neutral grey area with a transmission density within the range0

32、,33 to0,28 (transmittance within the range47% to53%), for technical drawings; a spectrally neutral clear area with a transmission density within the range of0,10 to0,07 (transmittance within the range80% to85%), for source documents; 3.3.4 graduated metric scale, as long as the space available on th

33、e transparent test target allows, of a width and contrast that permits easy measurement of the length of its microimage; 3.3.5 if necessary, lines, to check for possible optical distortions. All transmission density measurement shall be made in accordance with ISO5-2 and ISO5-3. 4 Methods 4.1 Method

34、 for checking the system Film the test target as specified in the appropriate International Standard, at each reduction ratio available, exposed so that density of the image of the grey test patch is1 0,1. Using a densitometer, check the density of the image of the nominated area. Measure the densit

35、y of the image of the black patch to check minimum density on the microform. To check legibility, evaluate the images of the test charts in accordance with ISO446 or ISO3334. Figure 1 Test targetISO 10550:1994(E) BSI 12-1999 3 4.2 Method for monitoring cameras in routine use Film the test target as

36、specified in the appropriate International Standard, in the image frame allocated to it, at each reduction ratio to be used for filming documents, though not necessarily at the exposure the documents would require. Using a densitometer, check the density of the image of the grey area. Measure the de

37、nsity of the image of the black patch to check minimum density. To check legibility, evaluate the images of the test charts in accordance with ISO446 or ISO3334.ISO 10550:1994(E) 4 BSI 12-1999 Annex A (informative) Examples of different types of original documents A.1 Documents to be microfilmed by

38、reflected light All the documents and drawings, except those described in the last paragraph ofA.2, which are intended to be read by reflected light. A.2 Documents to be microfilmed by transmitted light Documents to be microfilmed by transmitted light are, for example, the following: explanation pri

39、nted on a translucent or transparent base to be read together with the underlaid figure or drawing, as those used in a medical or a geological book; transparency for overhead projectors; exposed and developed radiographic film intended to be used for medical diagnosis; drawing on a translucent or tr

40、ansparent base, intended to be read by transmitted light.blankBS ISO 10550:1994 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the internati

41、onal level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We woul

42、d be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating ser

43、vice called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for internat

44、ional standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Techni

45、cal Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive

46、substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internation

47、al standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does

48、 not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.