BS ISO 10459-1993 Textile machinery - Dyeing and finishing machines - Designation of operating ranges of component parts《纺织机械 染色和精整机械 零部件工作范围标记》.pdf

《BS ISO 10459-1993 Textile machinery - Dyeing and finishing machines - Designation of operating ranges of component parts《纺织机械 染色和精整机械 零部件工作范围标记》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 10459-1993 Textile machinery - Dyeing and finishing machines - Designation of operating ranges of component parts《纺织机械 染色和精整机械 零部件工作范围标记》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 10459:1992 Implementation of ISO10459:1992 Textile machinery Dyeing and finishing machines Designation of operating ranges of component parts UDC677.057:621.81:003.62BSISO10459:1992 This BritishStandard, having been prepared under the directionof the Textiles and Clothing Sta

2、ndards Policy Committee, was published underthe authority of the Standards Board and comes intoeffect on 15 April1993 BSI02-2000 The following BSI references relate to the work on this standard: Committee reference TCM/33 Draft for comment91/43033DC ISBN 0 580 22093 1 Committees responsible for this

3、 BritishStandard The preparation of this BritishStandard was entrusted by the Textiles and Clothing Standards Policy Committee (TCM/-) to Technical Committee TCM/33, upon which the following bodies were represented: British Association of Clothing Machinery Manufacturers British Narrow Fabrics Assoc

4、iation British Paper and Board Industry Federation British Textile Machinery Association British Textile Technology Group Clothing and Footwear Institute Confederation of British Wool Textiles Limited Consumer Policy Committee of BSI Health and Safety Executive Knitting Industries Federation Ltd. Te

5、xtile Finishers Association Textile Institute Textile Research Council (HATRA) University of Manchester (Institute of Science and Technology) Amendments issued since publication Amd. No. Date CommentsBSISO10459:1992 BSI 02-2000 i Contents Page Committees responsible Inside front cover National forew

6、ord ii Foreword iii Text of ISO10459 1BSISO10459:1992 ii BSI 02-2000 National foreword This BritishStandard reproduces verbatim ISO10459:1992 and implements it as the UK national standard. This BritishStandard is published under the direction of the Textiles and Clothing Standards Policy Committee w

7、hose Technical Committee TCM/33 has the responsibility to: aid enquirers to understand the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and pr

8、omulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards, are available from BSI Sales Department, BSI, Linford Wood, Milton Keynes, MK146LE. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards

9、are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theISO title page, pagesiitoiv, page1 and a back cover. This stand

10、ard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.ISO10459:1992(E) ii BSI 02-2000 Contents Page Foreword iii 1 Scope 1 2 Operating ranges 1 3 Designation 1 4 Marking 1 Table 1 1ISO10459:1992(E)

11、BSI 02-2000 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subje

12、ct for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC

13、) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least75% of the member bodies casting a vote. International Standar

14、d ISO10459 was prepared by Technical Committee ISO/TC72, Textile machinery and allied machinery and accessories, Sub-Committee SC4, Dyeing, finishing and allied machinery and accessories.iv blankISO10459:1992(E) BSI 02-2000 1 1 Scope This Standard gives designations for the recommended operating ran

15、ges for component parts of dyeing and finishing machines. The parts covered are those which operate under dry or wet conditions or in steam, and which either come into contact with the fabric or are positioned within100mm of the fabric. 2 Operating ranges SeeTable 1. 3 Designation The designation of

16、 the operating range for a component part of a dyeing and finishing machine shall include the following information in the order given: a) “operating range”; b) reference to this International Standard (i.e.ISO10459); c) code designation. EXAMPLE Designation for a wet operating range with code B2: O

17、perating range ISO10459-B2 4 Marking The component part should be marked with the reference to this International Standard and the code designation specified in clause2. EXAMPLE ISO10459-B2 Table 1 Operating range Moisture content of fabric Relative humidity of ambient air Ambient temperature pH ran

18、ge Term Designation % % C Dry range A 1 60 Wet range B 1 20 40 20 80 95 6 to8 a 2 2 to12 b NOTEFor operating ranges which are not specified, special arrangements should be agreed between manufacturer and user of component parts. a Neutral range. b Acid and lye range.BS ISO 10459:1992 BSI 389 Chiswic

19、k High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amen

20、dment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard wou

21、ld inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of st

22、andards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been publ

23、ished as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available w

24、hich give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefi

25、ts contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 198

26、8 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details su

27、ch as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.