BS ISO 10223-2005 Textile machinery and accessories - Flat warp knitting machines - Numbering of guide bars《纺织机械和附件 平型经编机 导纱梳栉编号》.pdf

《BS ISO 10223-2005 Textile machinery and accessories - Flat warp knitting machines - Numbering of guide bars《纺织机械和附件 平型经编机 导纱梳栉编号》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 10223-2005 Textile machinery and accessories - Flat warp knitting machines - Numbering of guide bars《纺织机械和附件 平型经编机 导纱梳栉编号》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 10223:2005 Textile machinery and accessories Flat warp knitting machines Numbering of guide bars ICS 59.120.40 BS ISO 10223:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2005 BSI 30 November 2005 ISB

2、N 0 580 47341 4 National foreword This British Standard reproduces verbatim ISO 10223:2005 and implements it as the UK national standard. It supersedes BS ISO 10223:1992 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery, which

3、has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in th

4、e UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standard

5、s Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard do

6、es not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii and iii, a blank page, pages 1 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicat

7、es when the document was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 10223:2005(E)INTERNATIONAL STANDARD ISO 10223 Second edition 2005-07-01 Textile machinery and accessories Flat warp knitting machines Numbering of guide bars Matriel pour lindustrie

8、textile Machines tricoter rectilignes mailles jetes Numrotage des barres passettes BS ISO 10223:2005ii iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is no

9、rmally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in

10、 the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepa

11、re International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that so

12、me of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10223 was prepared by Technical Committee ISO/TC 72, Textile machinery and machinery for dry-cleaning and industrial laundering, Subcommittee

13、SC 3, Machinery for fabric manufacturing including preparatory machinery and accessories. This second edition cancels and replaces the first edition (ISO 10223:1992), which has been technically revised. BS ISO 10223:2005blank 1 Textile machinery and accessories Flat warp knitting machines Numbering

14、of guide bars 1 Scope This International Standard specifies the designation and the numbering of guide bars for flat warp knitting machines. NOTE The figures in this International Standard are given as examples. They do not represent the only, or even the most common arrangement. 2 Normative referen

15、ces The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 8640-1, Textile machinery and accessories

16、 Flat warp knitting machines Part 1: Vocabulary of basic structure and knitting elements 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 8640-1 apply. 4 Designation and abbreviation of guide bars The numbering of guide bars general abbreviation: B is

17、 done from front to back and from bottom to top using continuous Arabic figures 1 to n. Table 1 Designation Abbreviation Example with position number Guide bar B B 1 Ground guide bar GB GB 1 Pattern guide bar PB PB 1 Jacquard guide bar JB JB 1 Filler thread guide bar FB FB 3 BS ISO 10223:2005BS ISO

18、10223:2005 2 5 Numbering of guide bars 5.1 RL (single) flat warp knitting machine 5.1.1 RL (single) tricot machine Guide bar 1 (B 1) is the foremost positioned bar with yarn guides or yarn guide units (see Figure 1). Figure 1 RL (single) tricot machine with 2 ground guide bars (GB 1, GB 2) 5.1.2 RL

19、(single) Raschel machine Guide bar 1 (B 1) is the foremost positioned bar with yarn guides or yarn guide units (see Figures 2 and 3). Figure 2 RL (single) Raschel machine with 6 guide bars, of these 2 ground (GB 1, GB 2) and 4 pattern guide bars (PB 3 to PB 6) BS ISO 10223:20053Figure 3 (single) Ras

20、chel machine with 8 guide bars, of these 2 ground guide bars (GB 2, GB 8), 4 pattern guide bars (PB 3 to PB 6), 1 Jacquard split guide bar with half gauge (JB 1.1) and 1 Jacquard guide bar consisting of 2 Jacquard split guide bars each with half gauge (JB 7.1, JB 7.2) 5.1.3 RL (single) crochet machi

21、ne Guide bar 1 (B 1) is the foremost and lowest positioned bar with yarn guides or yarn guide units (see Figure 4). Figure 4 RL (single) crochet machine with 3 guide bars, of these 1 ground (GB 1) and 2 pattern guide bars (PB 2, PB 3) 4 5.1.4 RL (single) stitch bonding machine Guide bar 1 (B 1) is t

22、he foremost and lowest positioned bar with yarn guides or yarn guide units (see Figure 5). Figure 5 RL (single) stitch bonding machine with 3 guide bars, of these 2 ground (GB 1, GB 2) and 1 filler thread guide bar (FB 3) 5.2 RR (double) flat warp knitting machine 5.2.1 RR (double) tricot machine Gu

23、ide bar 1 (B 1) is the foremost positioned bar with yarn guides or yarn guide units (see Figure 6). Figure 6 RR (double) tricot machine with 2 ground guide bars (GB 1, GB 2) BS ISO 10223:2005 5 5.2.2 RR (double) Raschel machine Guide bar 1 (B 1) is the foremost positioned bar with yarn guides or yar

24、n guide units (see Figure 7). Figure 7 RR (double) Raschel machine with 4 ground guide bars (GB 1 and GB 4) BS ISO 10223:20056 Bibliography 1 ISO 7839, Textile machinery and accessories Knitting machines Vocabulary and classification BS ISO 10223:2005blankBS ISO 10223:2005 BSI 389 Chiswick High Road

25、 London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment

26、or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would i

27、nform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest

28、editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In respon

29、se to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through

30、its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI

31、 are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online ac

32、cess to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internation

33、al standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does

34、 not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.