BS IEC IEEE 62582-3-2013 Nuclear power plants Instrumentation and control important to safety Electrical equipment condition monitoring methods Elongation at break《核电站 对安全重要的仪表监测和控.pdf

《BS IEC IEEE 62582-3-2013 Nuclear power plants Instrumentation and control important to safety Electrical equipment condition monitoring methods Elongation at break《核电站 对安全重要的仪表监测和控.pdf》由会员分享，可在线阅读，更多相关《BS IEC IEEE 62582-3-2013 Nuclear power plants Instrumentation and control important to safety Electrical equipment condition monitoring methods Elongation at break《核电站 对安全重要的仪表监测和控.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationNuclear power plants Instrumentation and controlimportant to safety Electrical equipment conditionmonitoring methodsPart 3: Elongation at breakBS IEC/IEEE 62582-3:2012National fo

2、rewordThis British Standard is the UK implementation of IEC/IEEE 62582-3:2012.The UK participation in its preparation was entrusted to Technical CommitteeNCE/8, Reactor instrumentation.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication d

3、oes not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2013Published by BSI Standards Limited 2013ISBN 978 0 580 64472 6ICS 27.120.20Compliance with a British Standard cannot confer immunity fromlegal

4、 obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2013.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS IEC/IEEE 62582-3:2012IEC/IEEE 62582-3 Edition 1.0 2012-11 INTERNATIONAL STANDARD NORM

5、E INTERNATIONALE Nuclear power plants Instrumentation and control important to safety Electrical equipment condition monitoring methods Part 3: Elongation at break Centrales nuclaires de puissance Instrumentation et contrle-commande importants pour la sret Mthodes de surveillance de ltat des matriel

6、s lectriques Partie 3: Allongement la rupture INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE T ICS 27.120.20 PRICE CODE CODE PRIX ISBN 978-2-83220-424-5 Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vou

7、s assurer que vous avez obtenu cette publication via un distributeur agr. BS IEC/IEEE 62582-3:2012 2 62582-3 IEC/IEEE:2012 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope and object 8 2 Terms and definitions . 8 3 General description 9 4 Applicability and reproducibility 9 5 Measurement procedure . 9

8、 5.1 Stabilisation of the polymeric materials 9 5.2 Sampling . 9 5.2.1 General . 9 5.2.2 Sample requirements . 10 5.3 Specimen preparation . 10 5.3.1 General . 10 5.3.2 Dumb-bell specimens 11 5.3.3 Tubular specimens 11 5.3.4 O-ring specimens 11 5.4 Instrumentation . 11 5.4.1 Tensile test machine 11

9、5.4.2 Calibration . 11 5.4.3 Use of extensometers 11 5.5 Tensile elongation measurement method. 12 5.5.1 Conditioning 12 5.5.2 Dimensions of test specimens . 12 5.5.3 Clamping . 12 5.5.4 Testing speed 12 5.5.5 Recording data 13 5.5.6 Calculation of results . 13 5.6 Measurement report 14 Annex A (inf

10、ormative) Shape and dimensions of test specimens 15 Annex B (informative) Preparation of test specimens from cable samples 18 Annex C (informative) Typical load versus elongation curves . 20 Annex D (normative) Dies for cutting dumb-bell specimens 22 Annex E (informative) Example of a measurement re

11、port from tensile elongation measurements 23 Bibliography 24 Figure A.1 Shape of dumb-bell specimens . 15 Figure A.2 Fitting end tabs to tubular specimens 16 Figure A.3 Fitting soft inserts to tubular specimens 17 Figure A.4 Mounting of O-ring specimens in the test machine 17 Figure C.1 Typical load

12、-elongation curves . 20 Figure C.2 Typical load-time curve with a slipping specimen 21 Figure D.1 Suitable cutters for dumb-bell specimens 22 BS IEC/IEEE 62582-3:201262582-3 IEC/IEEE:2012 3 Table 1 Testing speeds for elongation measurements 12 Table A.1 Recommended dimensions for dumb-bell specimens

13、 . 15 BS IEC/IEEE 62582-3:2012 4 62582-3 IEC/IEEE:2012 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ NUCLEAR POWER PLANTS INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY ELECTRICAL EQUIPMENT CONDITION MONITORING METHODS Part 3: Elongation at break FOREWORD 1) The International Electrotechnical Commiss

14、ion (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in

15、addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee int

16、erested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEEE Standards documents are developed within IEEE Societies and Standards Coordinating Committees of

17、 the IEEE Standards Association (IEEE-SA) Standards Board. IEEE develops its standards through a consensus development process, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of IEEE and serve without

18、 compensation. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. Use of IEEE Standards documents is wholly volunta

19、ry. IEEE documents are made available for use subject to important notices and legal disclaimers (see http:/standards.ieee.org/IPR/disclaimers.html for more information). IEC collaborates closely with IEEE in accordance with conditions determined by agreement between the two organizations. 2) The fo

20、rmal decisions of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. The formal decisions of IEEE on technical matters, once consensus w

21、ithin IEEE Societies and Standards Coordinating Committees has been reached, is determined by a balanced ballot of materially interested parties who indicate interest in reviewing the proposed standard. Final approval of the IEEE standards document is given by the IEEE Standards Association (IEEE-SA

22、) Standards Board. 3) IEC/IEEE Publications have the form of recommendations for international use and are accepted by IEC National Committees/IEEE Societies in that sense. While all reasonable efforts are made to ensure that the technical content of IEC/IEEE Publications is accurate, IEC or IEEE ca

23、nnot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications (including IEC/IEEE Publications) transparently to the maximum extent possible in the

24、ir national and regional publications. Any divergence between any IEC/IEEE Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC and IEEE do not provide any attestation of conformity. Independent certification bodies provide conformity as

25、sessment services and, in some areas, access to IEC marks of conformity. IEC and IEEE are not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or IEEE or

26、 their directors, employees, servants or agents including individual experts and members of technical committees and IEC National Committees, or volunteers of IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board, for any personal injury

27、, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC/IEEE Publication or any other IEC or IEEE Publications. 8) Attention is drawn to the normative r

28、eferences cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that implementation of this IEC/IEEE Publication may require use of material covered by patent rights. By publication of

29、this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. IEC or IEEE shall not be held responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope

30、 of Patent Claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of

31、any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. BS IEC/IEEE 62582-3:201262582-3 IEC/IEEE:2012 5 International Standard IEC/IEEE 62582-3 has been prepared by subcommittee 45A: Instrumentation and control of nuclear facilities, of IEC technical com

32、mittee 45: Nuclear instrumentation, in cooperation with the Nuclear Power Engineering Committee of the Power & Energy Society of the IEEE1, under the IEC/IEEE Dual Logo Agreement. This publication is published as an IEC/IEEE Dual Logo standard. The text of this standard is based on the following IEC

33、 documents: FDIS Report on voting 45A/887/FDIS 45A/891/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. International standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. A l

34、ist of all parts of IEC/IEEE 62582, under the general title Nuclear power plants Instrumentation and control important to safety Electrical equipment condition monitoring methods, can be found on the IEC website. The IEC Technical Committee and IEEE Technical Committee have decided that the contents

35、 of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 1A list of IEEE pa

36、rticipants can be found at the following URL: http:/standards.ieee.org/downloads/62582-3/62582-3-2012/62582-3-2012_wg-participants.pdf. BS IEC/IEEE 62582-3:2012 6 62582-3 IEC/IEEE:2012 INTRODUCTION a) Technical background, main issues and organisation of the standard This part of this IEC/IEEE stand

37、ard specifically focuses on elongation at break methods for condition monitoring for the management of ageing of electrical equipment installed in nuclear power plants. The method is primarily suited to samples taken from equipment that are based on thermoplastic or elastomeric polymers. This part o

38、f IEC/IEEE 62582 is the third part of the IEC/IEEE 62582 series. It contains detailed descriptions of condition monitoring based on elongation at break measurements. The IEC/IEEE 62582 series is issued with a joint logo which makes it applicable to management of ageing of electrical equipment qualif

39、ied to IEEE as well as IEC Standards. Historically, IEEE Std 323-2003 introduced the concept and role that condition based qualification could be used in equipment qualification as an adjunct to qualified life. In equipment qualification, the condition of the equipment for which acceptable performan

40、ce was demonstrated is the qualified condition. The qualified condition is the condition of equipment, prior to the start of a design basis event, for which the equipment was demonstrated to meet the design requirements for the specified service conditions. Significant research has been performed on

41、 condition monitoring techniques and the use of these techniques in equipment qualification as noted in NUREG/CR-6704, vol.2 (BNL-NUREG-52610) and JNES-SS-0903, 2009. It is intended that this IEC/IEEE standard be used by test laboratories, operators of nuclear power plants, systems evaluators and li

42、censors. b) Situation of the current Standard in the structure of the IEC SC 45A standard series Part 3 of IEC/IEEE 62582 is the third level IEC SC 45A document tackling the specific issue of application and performance of elongation at break measurements in management of ageing of electrical instru

43、ment and control equipment in nuclear power plants. Part 3 of IEC/IEEE 62582 is to be read in association with part 1 of IEC/IEEE 62582, which provides requirements for application of methods for condition monitoring of electrical equipment important to safety of nuclear power plants. For more detai

44、ls on the structure of the IEC SC 45A standard series, see item d) of this introduction. c) Recommendations and limitations regarding the application of this Standard It is important to note that this Standard establishes no additional functional requirements for safety systems. d) Description of th

45、e structure of the IEC SC 45A standard series and relationships with other IEC documents and other bodies documents (IAEA, ISO) The top-level document of the IEC SC 45A standard series is IEC 61513. It provides general requirements for I&C systems and equipment that are used to perform functions imp

46、ortant to safety in NPPs. IEC 61513 structures the IEC SC 45A standard series. IEC 61513 refers directly to other IEC SC 45A standards for general topics related to categorization of functions and classification of systems, qualification, separation of systems, defence against common cause failure,

47、software aspects of computer-based systems, BS IEC/IEEE 62582-3:201262582-3 IEC/IEEE:2012 7 hardware aspects of computer-based systems, and control room design. The standards referenced directly at this second level should be considered together with IEC 61513 as a consistent document set. At a thir

48、d level, IEC SC 45A standards not directly referenced by IEC 61513 are standards related to specific equipment, technical methods, or specific activities. Usually these documents, which make reference to second-level documents for general topics, can be used on their own. A fourth level extending th

49、e IEC SC 45 standard series, corresponds to the Technical Reports which are not normative. IEC 61513 has adopted a presentation format similar to the basic safety publication IEC 61508 with an overall safety life-cycle framework and a system life-cycle framework. Regarding nuclear safety, it provides the interpretation of the general requirements of IEC 61508-1, IEC 61508-2 and IEC 61508-4, for the nuclear application sector, regarding nuclear safety. In thi