BS EN ISO 8560-1999 Construction drawings - Representation of modular sizes lines and grids《建筑图纸 模数尺寸、直线和格栅的表示法》.pdf

《BS EN ISO 8560-1999 Construction drawings - Representation of modular sizes lines and grids《建筑图纸 模数尺寸、直线和格栅的表示法》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 8560-1999 Construction drawings - Representation of modular sizes lines and grids《建筑图纸 模数尺寸、直线和格栅的表示法》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 8560:1999 Construction drawings Representation of modular sizes, lines and grids ICS 01.100.30BSENISO8560:1999 This British Standard, having been prepared under the directionof the Sector Committeefor Building and CivilEngineering, was publishedunderthe authority ofthe Sta

2、ndards Committee andcomesinto effect on 15October1999 BSI 04-2000 ISBN 0 580 35116 5 National foreword This British Standard reproduces verbatim ISO8560:1986 and implements it as the UK national standard. This standard, together with BSENISO4157-1:1999, BSENISO4157-2:1999, BSENISO 4157-3:1999, BSENI

3、SO6284:1999 and BSENISO 9431:1999 supersedes BS1192-1:1984 which is withdrawn The UK participation in its preparation was entrusted by Technical Committee B/212, Tolerances, drawing practice, modular co-ordination, joints, project information and computer modelling, to Subcommittee B/212/2, Construc

4、tion drawing practice, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European devel

5、opments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found in the BSI Standards Catalogue unde

6、r the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct ap

7、plication. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN ISO title page, page 2, the ISO title page, pages ii to iv, pages 1 to 6 and a back cover. Thi

8、s standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSENISO8560:1999 BSI 04-2000 i Contents Page National foreword Inside front co

9、ver Foreword 2 Foreword iii Text of ISO 8560 1ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 8560 July 1999 ICS 01.100.00 English version Technical drawingsConstruction drawings Representation of modular sizes, lines and grids (ISO 8560:1986) Dessins techniquesDessins de constructi

10、on Reprsentation des dimensions, lignes et quadrillages modulaires (ISO8560:1986) Zeichnungen fr das BauwesenDarstellung von modularen Gren, Linien und Rastern (ISO8560:1986) This European Standard was approved by CEN on1July1999. CEN members are bound to comply with the CEN/CENELEC Internal Regulat

11、ions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This Euro

12、pean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the nati

13、onal standards bodies of Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches

14、 Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1999CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 8560:1999EENISO8560:1999 BSI 04-2000 2 Foreword The text of the International Standard from Techni

15、cal CommitteeISO/TC10 “Technical drawings, product definition and related documentation” of the International Organization for Standardization (ISO) has been taken over as an European Standard by CEN/CS. This European Standard shall be given the status of a national standard, either by publication o

16、f an identical text or by endorsement, at the latest by January2000, and conflicting national standards shall be withdrawn at the latest by January2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Euro

17、pean Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the UnitedKingdom. Endorsement notice The text of the International Standard ISO8560:1986 has been approved by

18、 CEN as a European Standard without any modification.ENISO8560:1999 ii BSI 04-2000 Contents Page Foreword iii 1 Scope and field of application 1 2 References 1 3 General 1 4 Designations of modular sizes 1 5 Representation of modular lines and sizes 1 6 Representation of modular grids 2 7 Combinatio

19、n of modular sizes and work sizes on the same drawing 5 8 Bibliography 6 Figure 1 1 Figure 2 1 Figure 3 2 Figure 4 2 Figure 5 2 Figure 6 2 Figure 7 3 Figure 8 3 Figure 9 4 Figure 10 4 Figure 11 5 Figure 12 5 Descriptors: Drawings, technical drawings, construction, modules, schematic representation,

20、dimensions, lines.ENISO8560:1999 BSI 04-2000 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each

21、member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the te

22、chnical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least75% approval by the member bodies voting. International Standard ISO8560 was prepared by Te

23、chnical Committee ISO/TC10, Technical drawings. Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated.iv blankENISO8560:1999 BSI 04-2000 1 1 Scop

24、e and field of application This International Standard lays down rules for the representation of modular sizes, lines and grids on construction drawings. The basic module M is100mm (see ISO1006). Generally, modular sizes should be used on design drawings. Construction and work sizes should be used o

25、n production drawings. Modular sizes, lines and grids make the planning and design work easier. Multimodular grids may be added, to a limited extent, on construction drawings for manufacturing and construction for orientation and location. 2 References ISO 128, Technical drawingsGeneral principles o

26、f presentation. ISO 1006, Building constructionModular coordinationBasic module. ISO 2595, Building drawingsDimensioning of production drawingsRepresentation of manufacturing and work sizes. 3 General Drawings with modular sizes shall be executed in accordance with ISO128 and ISO2595. If necessary,

27、the drawings should have a note indicating that modular sizes are being used. 4 Designations of modular sizes 4.1 Drawings with sizes indicated in modules (instead of in millimetres or metres) should have a clear note explaining that this is the case. 4.2 The designations of modular sizes are as fol

28、lows. 5 Representation of modular lines and sizes 5.1 Modular and multimodular lines shall be drawn using a continuous line (seeFigure 1). The lowest level shall be drawn using a continuous thin line. 5.2 Where necessary for reasons of clarity, a modular line in an axial position may be indicated by

29、 a chain line (seeFigure 2). 4.2.1 Modular: n M 4.2.2 Basic module: M 4.2.3 Multimodules: 3M, 6M, 12M 4.2.4 Modular sizes: 10M 4.2.5 Multimodular sizes: 10 3M, 5 6M 4.2.6 Non-modular, if needed: M Figure 1 Figure 2 ENISO8560:1999 2 BSI 04-2000 5.3 Where necessary for identification purposes, multi-m

30、odular grid lines shall be terminated with a circle drawn with a thin line (seeFigure 3). 5.4 The line may be designated by a reference inside the circle (seeFigure 4). 5.5 Terminations for the size of a modular zone shall be the same as for single sizes, as specified in ISO2595 (seeFigure 5). 6 Rep

31、resentation of modular grids 6.1 Modular grids shall be drawn with modular lines. 6.2 Modular grids with different line intervals which are superimposed may be clarified by using a thin line for the smallest interval, a thick line for the next largest interval, etc. (seeFigure 6). Figure 3 Figure 4

32、Figure 5 Figure 6 ENISO8560:1999 BSI 04-2000 3 6.3 Indication of the size of a grid line interval is shown inFigure 7. 6.4 Indication of a modular or a non-modular zone is shown inFigure 8. Figure 7 Figure 8 ENISO8560:1999 4 BSI 04-2000 6.5 Indication of a change in direction of a modular grid is sh

33、own inFigure 9. 6.6 Indication of the displacement of a modular grid is shown inFigure 10. Figure 9 Figure 10 ENISO8560:1999 BSI 04-2000 5 6.7 Indication using a chain line of a modular line in an axial position is shown inFigure 11. 7 Combination of modular sizes and work sizes on the same drawing

34、An example of modular sizes and work sizes being used together on the same drawing is shown inFigure 12. Figure 11 Figure 12 ENISO8560:1999 6 BSI 04-2000 8 Bibliography For the purposes of this International Standard, it may be useful to consult the following International Standards: ISO 129, Techni

35、cal drawingsDimensioningGeneral principles, definitions, methods of execution and special indications. ISO 1040, Building constructionModular coordinationMultimodules for horizontal coordinating dimensions. ISO 1791, Building constructionModular coordinationVocabulary. ISO 2848, Building constructio

36、nModular coordinationPrinciples and rules. ISO 4068, Building and civil engineering drawingsReference lines. ISO 6514, Building constructionModular coordinationSub-modular increments.blankBSENISO 8560:1999 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent

37、 national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess

38、 the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of

39、 which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standar

40、ds publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards

41、 BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Cen

42、tre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyrig

43、ht Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in

44、any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.