BS EN ISO 21183-1-2006 Light conveyor belts - Principal characteristics and applications《轻型输送带 主要特性和应用》.pdf

《BS EN ISO 21183-1-2006 Light conveyor belts - Principal characteristics and applications《轻型输送带 主要特性和应用》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 21183-1-2006 Light conveyor belts - Principal characteristics and applications《轻型输送带 主要特性和应用》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58The European Standard EN ISO 21183-1:2006 has the status of a British StandardICS 53.040.20Light co

2、nveyor belts Part 1: Principal characteristics and applicationsBRITISH STANDARDBS EN ISO 21183-1:2006BS EN ISO 21183-1:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 December 2006 BSI 2006ISBN 0 580 49808 5Amendments issued since publ

3、icationAmd. No. Date CommentsThis publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applicationCompliance with a British Standard cannot confer immunity from legal obligationsNational forewordThis British Standard was published

4、by BSI. It is the UK implementation of EN ISO 21183-1:2006. It is identical with ISO 21183-1:2005. It supersedes BS EN 873:1997 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PRI/67, Conveyor belts.A list of organizations represented on PRI/67 can be

5、obtained on request to its secretary. EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 21183-1November 2006ICS 53.040.20 Supersedes EN 873:1996 English VersionLight conveyor belts - Part 1: Principal characteristics andapplications (ISO 21183-1:2005)Courroies transporteuses lgres - Partie 1:Car

6、actristiques et applications principales (ISO 21183-1:2005)Leichte Frdergurte - Teil 1: Grundeigenschaften undAnwendungen (ISO 21183-1:2005)This European Standard was approved by CEN on 21 October 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the cond

7、itions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three of

8、ficial versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, B

9、elgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDI

10、ZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 21183-1:2006: EForeword The text of ISO 21183-1:2005 ha

11、s been prepared by Technical Committee ISO/TC 41 “Pulleys and belts (including veebelts)” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 21183-1:2006 by Technical Committee CEN/TC 188 “Conveyor belts“, the secretariat of which is held by BSI. This Europ

12、ean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2007, and conflicting national standards shall be withdrawn at the latest by May 2007. This document supersedes EN 873:1996. According to the CEN/CENELEC

13、Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, N

14、etherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 21183-1:2005 has been approved by CEN as EN ISO 21183-1:2006 without any modifications. EN ISO 21183-1:2006Reference numberISO 21183-1:2005(E)INTERNATI

15、ONAL STANDARD ISO21183-1First edition2005-11-01Light conveyor belts Part 1: Principal characteristics and applicationsCourroies transporteuses lgres Partie 1: Caractristiques et applications principales EN ISO 21183-1:2006ii iiiForeword ISO (the International Organization for Standardization) is a w

16、orldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented

17、on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafte

18、d in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Stand

19、ard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 21183-1 was prepared

20、by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts), Subcommittee SC 3, Conveyor belts. This part of ISO 21183 is based on EN 873:1996, prepared by CEN/TC 188. ISO 21183 consists of the following parts, under the general title Light conveyor belts: Part 1: Principal characterist

21、ics and applications Part 2: List of equivalent terms EN ISO 21183-1:2006blank1Light conveyor belts Part 1: Principal characteristics and applications 1 Scope This part of ISO 21183 describes the principal characteristics and applications of light conveyor belts. This description is necessary either

22、 for limiting the validity of certain standards to light conveyor belts or for excluding light conveyor belts from the validity of certain standards. 2 Description 2.1 Applications 2.1.1 General applications Light conveyor belts are predominantly used for the indoor transport of unit loads (for exam

23、ple, parcels, boxes, cans, containers, luggage, industrial goods of all kinds and foodstuffs). In many cases, light conveyor belts are incorporated into a machine as an integral machine element. They are then called machine belts (also known as machine tapes). In that function, they perform either j

24、ust as a conveying element that additionally participates in a manufacturing action or in a manufacturing process. In such applications, machine belts sometimes get special names. EXAMPLE 1 Machines using machine belts with a pure conveying function: paper processing machinery (printing, cutting, et

25、c.), letter sorting/cancelling machines, ticket vending/defacing automats, packaging machines. EXAMPLE 2 Machines using machine belts participating in a manufacturing action or in a manufacturing process: newspaper folding machines, processing machinery for dough, chocolate and sweets, special proce

26、ssing machines for paper and plastic foil, cigarette manufacturing machines. EXAMPLE 3 Machine belts with special names: folder-gluer belts, tube-winder belts, printing blankets; processing belts in drying, coating, particle board manufacturing and other uses. 2.1.2 Other applications Bulk foods con

27、veying with light conveyor belts can be found in the chemical, pharmaceutical, cosmetic, food, agricultural, wood and tobacco industry. However they are almost always in indoor applications or outdoors under cover. EXAMPLE Granular or powdered materials, corn, rice, fruits, vegetables, wood chips, t

28、obacco. Outdoor applications of light conveyor belts are seldom encountered but are increasing for example, agricultural equipment, particularly some harvesting machines. EN ISO 21183-1:20062 2.2 Construction The tensile strength of light conveyor belts is normally provided by mainly synthetic fabri

29、c plies (polyamide, polyester, etc.) connected with each other either by bonding agents or by means of intermediate layers of different thickness, usually of thermoplastic material. The covers on both sides are function-related in material, thickness and texture. All combinations are possible, from

30、no coating via thin impregnation to thick coating and from ultra smooth to very rough surface. Coating materials may be thermoplasts (PVC, TPU, etc.), cross-linked synthetics (rubbers, PUR, etc.) and many others, all in very different hardness and other varieties of formulation. Highly specialized c

31、onstructions are found with machine belts very elastic belts, monolithic foils, surfaces with very high or low friction characteristics, etc. 2.3 Dimensions Light conveyor belts are almost exclusively manufactured in large widths (up to a few metres) and then are cut to any required dimension. The d

32、imensions of light conveyor belts are not standardized. Standardization would not be suitable as the light conveyor belts are predominantly used on non-standardized installations. The overall thicknesses vary from a few tenths of a millimetre to several millimetres, depending on the specific applica

33、tion (e.g. 10 mm or more in the case of light conveyor belts for the paper processing industry). The widths vary from about 10 mm (machine belts) to a few metres (processing belts). The lengths vary from about 500 mm to about 100 m. 2.4 Properties The ultimate tensile strengths vary from less than 1

34、00 N/mm of belt width to several hundred newtons per millimetre of belt width (e.g. to about 1 000 N/mm of belt width in highly specialized belt constructions with aramid fabrics). The maximum admissible working load is about 1/10 of the ultimate tensile strength. As mentioned in 2.2, the properties

35、 vary within a broad range and are function-related and, in the case of many types, are designed to meet highly specific application demands. EXAMPLE 1 Special light conveyor belts for the electronics industry have highly conductive covers with very small electric surface resistances and produce no

36、measurable electric field strength when running. These light conveyor belts are highly antistatic. EXAMPLE 2 Normal light conveyor belt covers are mostly insulators which usually generate high electric field strengths. Nevertheless, with some belts, no significant electric field strength is produced

37、 when the belt is running because of an electrically conductive layer inside the belt. These belts are antistatic in the sense of light conveyor belt technology. EN ISO 21183-1:2006blankBS EN ISO BSI389 Chiswick High RoadLondonW4 4AL21183-1:2006BSI British Standards InstitutionBSI is the independent

38、 national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they posses

39、s the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity o

40、f which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and

41、 foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI i

42、mplementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic

43、information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discount

44、s on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.b

45、si- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act

46、1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details

47、such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.