BS EN ISO 20344-2011 Personal protective equipment Test methods for footwear《个人防护设备 鞋靴的试验方法》.pdf

《BS EN ISO 20344-2011 Personal protective equipment Test methods for footwear《个人防护设备 鞋靴的试验方法》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 20344-2011 Personal protective equipment Test methods for footwear《个人防护设备 鞋靴的试验方法》.pdf（90页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 20344:2011Personal protective equipment Test methods for footwear(ISO 20344:2011)Copyright European Committee for Standardization Provided by IHS under license with CEN

2、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 20344:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO20344:2011. It supersedes BS EN ISO 20344:2004 which is withdrawn.The UK participation in its preparation w

3、as entrusted to TechnicalCommittee PH/1, Safety, protective and occupational footwear.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its

4、 correctapplication. The British Standards Institution 2012ISBN 978 0 580 67098 5ICS 13.340.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2012.Amend

5、ments issued since publicationDate Text affectedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 20344 December 2011 ICS 1

6、3.340.50 Supersedes EN ISO 20344:2004English Version Personal protective equipment - Test methods for footwear (ISO 20344:2011) quipement de protection individuelle - Mthodes dessai pour les chaussures (ISO 20344:2011) Persnliche Schutzausrstung - Prfverfahren fr Schuhe (ISO 20344:2011) This Europea

7、n Standard was approved by CEN on 30 November 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references con

8、cerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member i

9、nto its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ire

10、land, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix

11、17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 20344:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted

12、without license from IHS-,-,-BS EN ISO 20344:2011EN ISO 20344:2011 (E) 3 Foreword This document (EN ISO 20344:2011) has been prepared by Technical Committee CEN/TC 161 “Foot and leg protectors”, the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC 94 “Personal sa

13、fety - Protective clothing and equipment“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is

14、 drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 20344:2004. This document has been prepared under a mandate given

15、to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national st

16、andards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway

17、, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 20344:2011EN ISO 203

18、44:2011 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of

19、conforming to Essential Requirements of the EU Directive 89/686/EEC on PPE. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the clauses of this standard, toget

20、her with the relevant requirements given in the product standards, confers within the limits of the scope of those standards, a presumption of conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directive

21、s may be applicable to the product(s) falling within the scope of this standard. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 20344:2011ISO 20344:2011(E) ISO 2011 Al

22、l rights reserved iiiContents PageForeword .v1 Scope 12 Normative references .13 Terms and definitions .24 Sampling and conditioning .24.1 Sampling 24.2 Conditioning .24.3 Prerequisites on the testing procedure .25 Test methods for whole footwear 55.1 Specific ergonomic features 55.2 Determination o

23、f upper/outsole and sole interlayer bond strength 65.3 Determination of internal toecap length .115.4 Determination of impact resistance .125.5 Determination of compression resistance .155.6 Behaviour of toecaps and inserts (thermal and chemical) 175.7 Determination of leakproofness 185.8 Determinat

24、ion of the dimensional conformity of inserts and the penetration resistance of the sole 185.9 Determination of the flex resistance of penetration-resistant inserts 225.10 Determination of electrical resistance .225.11 Determination of footwear slip resistance .235.12 Determination of insulation agai

25、nst heat 265.13 Determination of insulation against cold 285.14 Determination of energy absorption of the seat region 295.15 Determination of resistance to water for whole footwear 315.16 Determination of impact resistance of a metatarsal protective device 365.17 Determination of the shock absorptio

26、n capacity of ankle protection materials incorporated into the upper 406 Test methods for upper, lining and tongue 426.1 Determination of thickness of upper .426.2 Measurement of the height of the upper .426.3 Determination of tear strength of the upper, lining and/or tongue 436.4 Determination of t

27、he tensile properties of the upper material 436.5 Determination of upper flexing resistance .446.6 Determination of water vapour permeability (WVP) .476.7 Determination of water vapour absorption (WVA) 516.8 Determination of water vapour coefficient .546.9 Determination of pH value 546.10 Determinat

28、ion of resistance to hydrolysis of upper 546.11 Determination of chromium VI content .546.12 Determination of abrasion resistance of lining and insock .546.13 Determination of water penetration and water absorption for upper576.14 Determination of resistance of upper to cutting .597 Test methods for

29、 insole and insock .597.1 Determination of insole thickness 597.2 Determination of water absorption and desorption of insole and insock .597.3 Determination of abrasion resistance of insole 628 Test methods for outsole 648.1 Determination of outsole thickness .648.2 Determination of tear strength of

30、 outsole 658.3 Determination of outsole abrasion resistance 658.4 Determination of flexing resistance of outsole .65Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 2034

31、4:2011ISO 20344:2011(E)iv ISO 2011 All rights reserved8.5 Determination of resistance to hydrolysis of outsole .708.6 Determination of resistance to fuel oil 708.7 Determination of resistance to hot contact 71Annex A (normative) Procedure for plasticine calibration 74Annex B (normative) Assessment o

32、f footwear by the laboratory during testing of thermal behaviour 76Annex C (informative) Footwear sizes 77Bibliography .78Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN IS

33、O 20344:2011ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject fo

34、r which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on

35、all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are

36、circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held resp

37、onsible for identifying any or all such patent rights.ISO 20344 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 161, Foot and leg protectors, in collaboration with ISO Technical Committee ISO/TC 94, Personal safety Protective clothing and equipment, Subcom

38、mittee SC 3, Foot protection, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).This second edition cancels and replaces the first edition (ISO 20344:2004), which has been technically revised. It also incorporates the Technical Corrigendum ISO 20344:200

39、4/Cor.1:2005 and the Amendment ISO 20344:2004/Amd.1:2007. The main differences between this edition and the 2004 edition are: Annex A, inclusion of a new procedure for plasticine calibration; Annex C, inclusion of a new table for footwear sizing; 4.1, Table 1, clarification of the method for samplin

40、g; 5.1, clarification on testing of ergonomic features; 5.4 and 5.5, inclusion of a reference to EN 12568:2010; 5.8.3, different test methods for anti-penetration insoles; 5.15.2, inclusion of a new test method for water resistance; 6.4.2 and 6.5.2, inclusion of test methods (due to the withdrawal o

41、f ISO 2023); 6.11, replacement of the method for determination of chromium VI by a reference to ISO 17075; withdrawal of 5.11, “Determination of the electrical insulation”.ISO 20344:2011(E) ISO 2011 All rights reserved vCopyright European Committee for Standardization Provided by IHS under license w

42、ith CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 20344:2011Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 20344:2011

43、INTERNATIONAL STANDARD ISO 20344:2011(E)Personal protective equipment Test methods for footwear1 ScopeThis International Standard specifies methods for testing footwear designed as personal protective equipment.2 Normative referencesThe following referenced documents are indispensable for the applic

44、ation of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 34-1:2010, Rubber, vulcanised or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent

45、 test piecesISO 868, Plastics and ebonite Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)ISO 1817:2011, Rubber, vulcanised Determination of the effect of liquidsISO 3290-1, Rolling bearings Balls Dimensions and tolerancesISO 3376, Leather Physical and me

46、chanical tests Determination of tensile strength and percentage extensionISO 3377-2, Leather Physical and mechanical tests Determination of tear load Part 2: Double edge tearISO 4045, Leather Determination of pHISO 4643:1992, Moulded plastic footwear Lined or unlined poly (vinyl chloride) boots for

47、general industrial use SpecificationISO 4649:2010, Rubber, vulcanized or thermoplastic Determination of abrasion resistance using a rotating cylindrical drum deviceISO 4674-1:2003, Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methodsISO 5423:1992,

48、 Moulded plastic footwear Lined or unlined polyurethane boots for general industrial use SpecificationISO 13287, Personal protective equipment Footwear Test method for slip resistanceISO 17075, Leather Chemical analysis Determination of chromium VIISO 20345:2011, Personal protective equipment Safety footwearISO 20347, Personal protective equipment Occupational footwearISO 23529:2010, Rubber General procedures for preparing and conditioning test pieces for physical test methodsEN 388:2003, Protective gloves against mechanical risksEN 12