BS EN ISO 15098-3-2000 Dental tweezers College types《牙科镊子 学院型》.pdf

《BS EN ISO 15098-3-2000 Dental tweezers College types《牙科镊子 学院型》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 15098-3-2000 Dental tweezers College types《牙科镊子 学院型》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN ISO 15098-3:2000 Th

2、e European Standard EN ISO 15098-3:2000 has the status of a British Standard ICS 11.060.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Dental tweezers Part 3: College typesThis British Standard, having been prepared under the direction of the Health and Environment Sector

3、Committee, was published under the authority of the Standards Committee and comes into effect on 15 May 2000 BSI 05-2000 ISBN 0 580 34332 4 BS EN ISO 15098-3:2000 Amendments issued since publication Amd. No. Date Comments National foreword This British Standard is the official English language versi

4、on of EN ISO 15098-3:2000. It is identical with ISO 15098-3:2000. The UK participation in its preparation was entrusted to Technical Committee CH/52, Dental instruments, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee

5、 any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-reference

6、s Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in

7、the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are

8、responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv,

9、 pages 1 to 5, the annex ZA page, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.EUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO150983 February2000 ICS11.060.00 Englishversion DentaltweezersPart3:Collegetype

10、s(ISO150983:2000) PrcellesdentairesPartie3:TypeCollege(ISO15098 3:2000) ZahnrztlichePinzettenTeil3:CollegeTyp(ISO15098 3:2000) ThisEuropeanStandardwasapprovedbyCENon24January2000. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standar

11、dthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra

12、nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Po

13、rtugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG CentralSecretariat:ruedeStassart,36B1050Brussels 2000CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO1509

14、83:2000EgaPe2 ENISO150983:2000 Corrected20000322 Foreword ThetextoftheInternationalStandardISO150983:2000hasbeenpreparedbyTechnicalCommitteeISO/TC106 “Dentistry“incollaborationwithTechnicalCommitteeCEN/TC55“Dentistry“,thesecretariatofwhichisheldbyDIN . ThisEuropeanStandardshallbegiventhestatusofanat

15、ionalstandard,eitherbypublicationofanidenticaltextorby endorsement,atthelatestbyAugust2000,andconflictingnationalstandardsshallbewithdrawnatthelatestbyAugust 2000. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowingcountriesare boundtoimplementthisEuropeanSta

16、ndard:Austria,Belgium,CzechRepublic,Denmark,Finland,France,Germany, Greece,Iceland,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandtheUnited Kingdom. Endorsementnotice ThetextoftheInternationalStandardISO150983:2000wasapprovedbyCENasaEuropeanStandardwithoutany modific

17、ation. NOTE:NormativereferencestoInternationalStandardsarelistedinannexZA(normative). EN ISO 15098-3:2000Referencenumber ISO15098-3:2000(E) INTERNATIONAL STANDARD ISO 15098-3 Firstedition 2000-02-15 Dentaltweezers Part3: Collegetypes Prcelles dentaires Partie 3: Type College EN ISO 15098-3:2000ii EN

18、 ISO 15098-3:2000 iii Contents Page 1 Scope1 2 Normativereferences1 3 Termsanddefinitions.1 4 Designanddimensions1 5 Designation,labellingandmarking.5 EN ISO 15098-3:2000iv Foreword ISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISO memberbodies).T

19、heworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas therighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnon-governmental,in liaisonwithISO,alsotakepar

20、tinthework.ISOcollaboratescloselywiththeInternationalElectrotechnical Commission(IEC)onallmattersofelectrotechnicalstandardization. InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3. DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtothem

21、emberbodiesforvoting. PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote. AttentionisdrawntothepossibilitythatsomeoftheelementsofthispartofISO15098maybethesubjectof patentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights. Internation

22、alStandardISO15098-3waspreparedbyTechnicalCommitteeISO/TC106, Dentistry, Subcommittee SC4, Dental instruments. ISO15098consistsofthefollowingparts,underthegeneraltitle Dental tweezers: Part 1: General requirements Part 2: Meriam types Part 3: College types EN ISO 15098-3:2000 1 Dentaltweezers Part3:

23、 Collegetypes 1 Scope ThispartofISO15098specifiesrequirements,includingdimensions,forCollegetypedentaltweezers. 2 Normativereferences Thefollowingnormativedocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsof thispartofISO15098.Fordatedreferences,subsequentamendmentsto,or

24、revisionsof,anyofthesepublications donotapply.However,partiestoagreementsbasedonthispartofISO15098areencouragedtoinvestigatethe possibilityofapplyingthemostrecenteditionsofthenormativedocumentsindicatedbelow.Forundated references,thelatesteditionofthenormativedocumentreferredtoapplies.MembersofISOan

25、dIECmaintain registersofcurrentlyvalidInternationalStandards. ISO1942-3, Dental vocabulary Part 3: Dental instruments. ISO15098-1:1999, Dental tweezers Part 1: General requirements. 3 Termsanddefinitions ForthepurposesofthispartofISO15098,thetermsanddefinitionsgiveninISO1942-3andthefollowingapply. 3

26、.1 guidepin pinforguidingthetweezerhalveswhenthetweezersarepressedtogether 4 Designanddimensions 4.1 General GeneralrequirementsfordentaltweezersarespecifiedinISO15098-1. CollegetypedentaltweezersshallhavethedesignsshowninFigures1and2andthedimensionsasgivenin Table1.Thepointsofmeasurementassociatedw

27、iththedimensionsarelistedinTable2. AnnexAofISO15098-1:1999providesdetailsofonemethodofmeasurementapplicabletomosttypesofdental tweezers. Collegetypedentaltweezersaregroupedintothefollowingtypesaccordingtotheshapeoftheworkingend: type1:angled; type2:curved. EN ISO 15098-3:20002 4.2 Length Collegetype

28、dentaltweezersshallhavealengthlof(150 5)mm. 4.3 Workingend Theworkingendshallbeserratedorsmooth.IfitisserrateditshallbeinaccordancewithFigure1orFigure2, enlargedview. 4.4 Handle Thehandleshallbeserrated. 4.5 Guidepin Collegetypedentaltweezersshallhaveaguidepin.Inadditionitmayhaveastopperfortheguidep

29、in. Table1DimensionsofCollegetypedentaltweezers Type b 1 mm b 2 mm b 3 mm h 1 mm l mm r mm 1(angled) 1,3 1,1 10 8 150 40 2(curved) 1,3 1,1 10 8 150 15 Tolerance 0,2 0,2 1 1 5 ref a 5 a Referencedimension. Table2PointsofmeasurementforCollegetypedentaltweezers Symbol Dimension Pointofmeasurement b 1 B

30、ladewidth Measuredatadistanceof3mmfromthetipof theworkingend. b 2 Bladethickness Measuredatadistanceof3mmfromthetipof theworkingend. b 3 Bladelength Distancemeasuredfromtheextremetipofthe blade,paralleltothecentrelineoftheblade,to theblade/shankinterface. h 1 Bladeheight Distancemeasuredfromthecentr

31、elineofthe instrument,atrightanglestothecentrelineof theinstrument,tothefarthestextremityofthe blade. l Length Distancemeasuredwithclosedtweezersfrom thefarthestextremityoftheblade,paralleltothe centrelineoftheinstrument,totheendofthe instrument. r Radiusofblade Radiusofcurvatureoftheinsideoftheblad

32、e. Bladeangle Anglefromthecentrelineofthebladetothe centrelineoftheinstrument. EN ISO 15098-3:2000 3 Dimensionsinmillimetres Key 1 Guidepin 2 Handleserrations Figure1DentaltweezersCollegetypeType1:angled EN ISO 15098-3:20004 Dimensionsinmillimetres Key 1 Guidepin 2 Handleserrations Figure2Dentaltwee

33、zersCollegetypeType2:curved EN ISO 15098-3:2000 5 5 Designation,labellingandmarking IftheCollegetypetweezersmeettherequirementsofthispartofISO15098thenthemanufacturermayincludein thecatalogue,onthepackageoftheproductandontheinstrumentthenumberofthispartofISO15098 (ISO15098-3)followedbyanobliquestrok

34、eandthenumberindicatingthetypeoftweezersasshowninTable1. EXAMPLE TweezersofCollegetype1shallbedesignatedasfollows:ISO15098-3/1 EN ISO 15098-3:2000gaPe3 ENISO150983:2000 AnnexZA (normative) Normativereferencestointernationalpublications withtheirrelevantEuropeanpublications ThisEuropeanStandardincorp

35、oratesbydatedorundatedreference,provisionsfromother publications.Thesenormativereferencesarecitedattheappropriateplacesinthetextandthe publicationsarelistedhereafter.Fordatedreferences,subsequentamendmentstoorrevisionsof anyofthesepublicationsapplytothisEuropeanStandardonlywhenincorporatedinitby ame

36、ndmentorrevision.Forundatedreferencesthelatesteditionofthepublicationreferredto applies. Publication Year Title EN Year ISO 19423 1989 DentalvocabularyPart3:Dental Instruments EN219423 1993 ISO 150981 1999 DentaltweezersPart1:General requirements ENISO150981 2000 EN ISO 15098-3:2000BS EN ISO 15098-3

37、:2000 BSI 389 Chiswick High Road London W4 4AL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

38、 BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. U

39、sers of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secr

40、etary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buy

41、ing standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published

42、as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which

43、give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benef

44、its contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents

45、Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary det

46、ails such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.