BS EN ISO 14582-2013 Fasteners Hexalobular socket countersunk head screws high head《紧固件 高头六小叶插座沉头螺丝》.pdf

《BS EN ISO 14582-2013 Fasteners Hexalobular socket countersunk head screws high head《紧固件 高头六小叶插座沉头螺丝》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 14582-2013 Fasteners Hexalobular socket countersunk head screws high head《紧固件 高头六小叶插座沉头螺丝》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN ISO 14582:2013Fasteners Hexalobularsocket countersunk headscrews, high headBS EN ISO 14582:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO14582:2013.The UK participation in its preparation was entrusted to TechnicalCommitt

2、ee FME/9, Fasteners.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Publi

3、shed by BSI StandardsLimited 2013ISBN 978 0 580 75165 3ICS 21.060.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2013.Amendments issued since publi

4、cationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 14582 September 2013 ICS 21.060.10 English Version Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013) lments de fixation - Vis tte fraise six lobes internes, tte haute (ISO 14582:2013) Me

5、chanische Verbindungselemente - Senkschrauben mit Innensechsrund, hoher Kopf (ISO 14582:2013) This European Standard was approved by CEN on 24 August 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the s

6、tatus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French,

7、 German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cr

8、oatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

9、 United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No

10、. EN ISO 14582:2013: EBS EN ISO 14582:2013EN ISO 14582:2013 (E) 3 Foreword This document (EN ISO 14582:2013) has been prepared by Technical Committee ISO/TC 2 “Fasteners“ in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN. This European Standard

11、shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at the latest by March 2014. Attention is drawn to the possibility that some of the elements of this docu

12、ment may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:

13、Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, S

14、weden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 14582:2013 has been approved by CEN as EN ISO 14582:2013 without any modification. BS EN ISO 14582:2013ISO 14582:2013(E) ISO 2013 All rights reserved iiiContents PageForeword iv1 Scope . 12 Normative references 13

15、Dimensions . 24 Requirements and reference International Standards 65 Marking 66 Designation 6Bibliography 7BS EN ISO 14582:2013ISO 14582:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of pr

16、eparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, i

17、n liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IE

18、C Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that so

19、me of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declar

20、ations received. www.iso.org/patentsAny trade name used in this document is information given for the convenience of users and does not constitute an endorsement.The committee responsible for this document is ISO/TC 2, Fasteners, Subcommittee SC 11, Fasteners with metric external thread.iv ISO 2013

21、All rights reservedBS EN ISO 14582:2013INTERNATIONAL STANDARD ISO 14582:2013(E)Fasteners Hexalobular socket countersunk head screws, high head1 ScopeThis International Standard specifies hexalobular socket countersunk head bolts and screws with high head (full loadability), of product grade A, and t

22、hread diameters from M3 up to and including M10 and property classes 4.8, 8.8 and 10.9.NOTE 1 In comparison with ISO common countersunk head, the height of the head has been slightly increased in order to have screws with full loadability, in conformity with the mechanical properties specified in IS

23、O 898-1.This International Standard also specifies gauge dimensions for the control of the head dimensions.NOTE 2 Because of the increased head height, these screws are not fully interchangeable with other countersunk ISO metric screws. The assembled parts also need a slightly deeper countersink tha

24、n those specified in ISO 15065.If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, for example ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 4759-1.2 Normative referencesThe following d

25、ocuments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 225, Fasteners Bolt

26、s, screws, studs and nuts Symbols and descriptions of dimensionsISO 261, ISO general purpose metric screw threads General planISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes Coarse thread and fine pitc

27、h threadISO 965-2, ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes for general purpose external and internal screw threads Medium qualityISO 3269, Fasteners Acceptance inspectionISO 4042, Fasteners Electroplated coatingsISO 4759-1, Tolerances for fasteners Part 1: Bolts,

28、screws, studs and nuts Product grades A, B and CISO 6157-1, Fasteners Surface discontinuities Part 1: Bolts, screws and studs for general requirementsISO 8992, Fasteners General requirements for bolts, screws, studs and nutsISO 10664, Hexalobular internal driving feature for bolts and screwsISO 1068

29、3, Fasteners Non-electrolytically applied zinc flake coatingsISO 10684, Fasteners Hot dip galvanized coatings ISO 2013 All rights reserved 1BS EN ISO 14582:2013ISO 14582:2013(E)3 DimensionsSee Figures 1 and 2 and Table 1. Symbols and descriptions of dimensions are specified in ISO 225.2 ISO 2013 All

30、 rights reservedBS EN ISO 14582:2013ISO 14582:2013(E)a) Partially threaded screwwithout shoulder with shouldergb) Screw threaded to the headaIncomplete thread u 2P.bdsapplies if values of ls,minare specified.cPoint is to be chamfered or, for sizes M4, “as rolled” in conformity with ISO 4753.dEdge of

31、 the head flat or rounded.eamax 2P.famax 2,5P.gAny shape or size of the reinforcing feature is at the discretion of the manufacturer and shall not exceed d.Figure 1 Hexalobular socket countersunk head screw, high head ISO 2013 All rights reserved 3BS EN ISO 14582:2013ISO 14582:2013(E)Key1 dk theoret

32、ical,max2 dk actual,max3 dk actual,minF flushness tolerance of the gauge (see Table 1)Figure 2 Countersunk head configurationFor gauging of the head and for dimensions of the gauge allowing the control of the head dimensions see Figure 3 and Table 1. The top surface of the screw shall be located bet

33、ween the gauge surfaces A and B.Tolerances in millimetresKeyF flushness tolerance of the gauge (see Table 1)a D = dk theoretical,maxFigure 3 Flushness gauge4 ISO 2013 All rights reservedBS EN ISO 14582:2013ISO 14582:2013(E)Table 1 Dimensions for hexalobular socket countersunk head screws, high headD

34、imensions in millimetres Thread, d M3 M4 M5 M6 M8 M10 Pa0,5 0,7 0,8 1 1,25 1,5 b ref. 18 20 22 24 28 32 da max. 3,30 4,40 5,50 6,60 8,54 10,62 min.b3,20 4,30 5,40 6,50 8,44 10,52 dk theoretical max. 7,40 10,02 12,00 14,44 19,38 23,00 actual max. 6,57 9,02 10,90 13,20 17,90 21,30 min. 6,17 8,52 10,27

35、 12,46 17,09 20,49 ds max. 3,00 4,00 5,00 6,00 8,00 10,00 min. 2,86 3,82 4,82 5,82 7,78 9,78 Fcmax. 0,25 0,25 0,30 0,35 0,40 0,40 kdmax. 2,20 3,01 3,50 4,22 5,69 6,50 r min. 0,10 0,20 0,20 0,25 0,40 0,40 Hexalobular socket Socket No. 10 20 25 30 45 50 A ref. 2,8 3,95 4,5 5,6 7,93 8,95 t max. 1,18 1,

36、69 1,89 2,22 2,99 3,30 min. 0,92 1,30 1,50 1,83 2,60 2,91 lels and lg ls lg ls lg ls lg ls lg ls lg ls lg nom.fmin. max. min. max. min. max. min. max. min. max. min. max. min. max. 8 7,71 8,29 10 9,71 10,29 12 11,65 12,35 (14) 13,65 14,35 16 15,65 16,35 20 19,58 20,42 25 24,58 25,42 30 29,58 30,42 9

37、,5 12 6,5 10 35 34,5 35,5 11,5 15 9 13 40 39,5 40,5 16,5 20 14 18 11 16 45 44,5 45,5 19 23 16 21 50 49,5 50,5 24 28 21 26 15,75 22 55 54,4 55,6 26 31 20,75 27 15,5 23 60 59,4 60,6 31 36 25,75 32 20,5 28 65 64,4 65,6 30,75 37 25,5 33 70 69,4 70,6 35,75 42 30,5 38 80 79,4 80,6 45,75 52 40,5 48 90 89,3

38、 90,7 50,5 58 100 99,3 100,7 60,5 68 aP is the pitch of the thread. bValues for da,min are based on a radius r = 0,25d. cThe g976lushness tolerance of the gauge, F, has the tolerance 00,01. dThe dimensions of the gauges deg976ined in ISO 7721 are not adapted to this countersunk head. ePreferred leng

39、ths are between the bold, stepped lines. Lengths above the discontinuous, stepped line are threaded to the head within 3P. Lengths below the discontinuous, stepped line have values of lg and ls in accordance with the following formulae: lg,max = lnom b ls,min = lg,max 5P fDimensions in parentheses s

40、hould be avoided. ISO 2013 All rights reserved 5BS EN ISO 14582:2013ISO 14582:2013(E)4 Requirements and reference International StandardsSee Table 2.Table 2 Requirements and reference International StandardsMaterial SteelGeneral requirements International Standard ISO 8992ThreadTolerance class 6gInt

41、ernational Standards ISO 261, ISO 965-2Mechanical propertiesProperty class 4.8, 8.8, 10.9International Standard ISO 898-1ToleranceProduct grade AInternational Standard ISO 4759-1Hexalobular socket International Standard ISO 10664Finish CoatingAs processed Requirements for electroplating are specifie

42、d in ISO 4042. Requirements for non-electrolytically applied zinc flake coatings are specified in ISO 10683. Requirements for hot dip galvanizing are specified in ISO 10684. Additional requirements or other finishes or coatings shall be agreed between the supplier and the pur-chaser.Surface integrit

43、yLimits for surface discontinuities are specified in ISO 6157-1.Acceptability Acceptance procedure is specified in ISO 3269.5 MarkingWhen requested, screws of diameter M5 and above shall be marked in accordance with ISO 898-1.6 DesignationThe designation requirements shall apply as specified in ISO

44、898-1.EXAMPLE A hexalobular socket countersunk head screw, high head, with thread M10, nominal length l = 40 mm and property class 10.9 is designated as follows:Countersunk head screw ISO 14582 - M10 40 10.96 ISO 2013 All rights reservedBS EN ISO 14582:2013ISO 14582:2013(E)Bibliography1 ISO 888, Fas

45、teners Bolts, screws and studs Nominal lengths and thread lengths2 ISO 4753, Fasteners Ends of parts with external ISO metric thread3 ISO 7721, Countersunk head screws Head configuration and gauging4 ISO 15065, Countersinks for countersunk head screws with head configuration in accordance with ISO 7

46、721 ISO 2013 All rights reserved 7This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and othe

47、r standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertis

48、e into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standard

49、sWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, th