BS EN ISO 11681-2-2011 Machinery for forestry Portable chain-saw safety requirements and testing Chain-saws for tree service《林业机械 便携式链锯的测试和安全性要求 树木砍伐用链锯》.pdf

《BS EN ISO 11681-2-2011 Machinery for forestry Portable chain-saw safety requirements and testing Chain-saws for tree service《林业机械 便携式链锯的测试和安全性要求 树木砍伐用链锯》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 11681-2-2011 Machinery for forestry Portable chain-saw safety requirements and testing Chain-saws for tree service《林业机械 便携式链锯的测试和安全性要求 树木砍伐用链锯》.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 11681-2:2011Machinery for forestry Portable chain-saw safetyrequirements and testingPart 2: Chain-saws for tree service (ISO11681-2:2011)Copyright European Committee fo

2、r Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHSBS EN ISO 11681-2:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO11681-2:2011. It supersedes BS EN ISO 11681-2:2008 whi

3、ch iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee AGE/29, Forestry machinery.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contrac

4、t. Users are responsible for its correctapplication. The British Standards Institution 2012ISBN 978 0 580 67837 0ICS 65.060.80Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Co

5、mmittee on 31 January 2012.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for Resale-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11681-2 December 2011 ICS 65.060.80 Supersedes

6、EN ISO 11681-2:2008English Version Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011) Matriel forestier - Exigences de scurit et essais des scies chane portatives - Partie 2: Scies chane pour llagage des arbres (ISO 11

7、681-2:2011) Forstmaschinen - Sicherheitstechnische Anforderungen und Prfungen fr tragbare Kettensgen - Teil 2: Kettensgen fr die Baumpflege (ISO 11681-2:2011) This European Standard was approved by CEN on 30 November 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations whi

8、ch stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Eu

9、ropean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members

10、are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swe

11、den, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.

12、 Ref. No. EN ISO 11681-2:2011: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHSBS EN ISO 11681-2:2011EN ISO 11681-2:2011 (E) 3 Foreword This document (EN ISO 11681-2:2011) has been p

13、repared by Technical Committee ISO/TC 23 “Tractors and machinery for agriculture and forestry“ in collaboration with Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a n

14、ational standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

15、rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11681-2:2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essentia

16、l requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:

17、Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingd

18、om. Endorsement notice The text of ISO 11681-2:2011 has been approved by CEN as a EN ISO 11681-2:2011 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for Resale-,-,-BS EN ISO 11681-2:2011EN ISO 11681-2:2011 (E) 4 Annex ZA (informat

19、ive) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Essential Requirem

20、ents of the New Approach Directive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, wit

21、hin the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. Copy

22、right European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHSBS EN ISO 11681-2:2011ISO 11681-2:2011(E) ISO 2011 All rights reserved iiiContents PageForeword ivIntroduction . v1 Scope 12 Normative refe

23、rences .13 Terms and definitions .24 Safety requirements and/or protective measures 34.1 General .34.2 Handles 34.3 Hand protection .34.4 Balance and holding moment 54.5 Protection against injury by kickback .54.6 Chain catcher .64.7 Spiked bumper .64.8 Chip discharge .64.9 Guide-bar cover .64.10 En

24、gine starting device .64.11 Engine stopping device .74.12 Throttle control 74.13 Drive sprocket guard 84.14 Clutch .84.15 Protection against contact with parts under high voltage .94.16 Protection against contact with hot parts 94.17 Fuel and oil systems .104.18 Exhaust gases 114.19 Chain lubricatio

25、n .114.20 Chain tensioning .114.21 Attachment device 114.22 Vibration .124.23 Noise .124.24 Electromagnetic immunity 125 Information for use .135.1 Instruction handbook .135.2 Marking .165.3 Warnings 165.4 Test of labels .17Annex A (informative) Working with tree service chain-saws from rope and har

26、ness 19Annex B (informative) List of significant hazards 24Bibliography .26Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHSBS EN ISO 11681-2:2011ForewordISO (the International Organiz

27、ation for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established

28、 has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.In

29、ternational Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Public

30、ation as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rig

31、hts.ISO 11681-2 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 17, Manually portable forest machinery.This third edition cancels and replaces the second edition (ISO 11681-2:2006), which has been technically revised.ISO 11681 consi

32、sts of the following parts, under the general title Machinery for forestry Po rtable chain-saw safety requirements and testing: Part 1: Chain-saws for forest service Part 2: Chain-saws for tree serviceISO 11681-2:2011(E)iv ISO 2011 All rights reservedCopyright European Committee for Standardization

33、Provided by IHS under license with CENNot for Resale-,-,-BS EN ISO 11681-2:2011IntroductionThis document is a type-C standard as stated in ISO 12100.The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the scope of this docume

34、nt.When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of

35、this type-C standard.At the time of publication of this edition, it was not state of the art to require that starting of the machine would be always possible without causing movement of the saw chain. Such a requirement will be considered for inclusion in the next revision of this International Stan

36、dard.ISO 11681-2:2011(E) ISO 2011 All rights reserved vCopyright European Committee for Standardization Provided by IHS under license with CENNot for Resale-,-,-BS EN ISO 11681-2:2011Copyright European Committee for Standardization Provided by IHS under license with CENNot for Resale-,-,-BS EN ISO 1

37、1681-2:2011INTERNATIONAL STANDARD ISO 11681-2:2011(E)Machinery for forestry Portable chain-saw safety requirements and testing Part 2:Chain-saws for tree service1 ScopeThis part of ISO 11681 gives safety requirements and measures for their verification for the design and construction for tree servic

38、e of portable, combustion-engine, hand-held chain-saws having a maximum mass without guide bar or saw chain and with tanks empty of 4,3 kg, intended to be used, with the right hand on the rear handle and left hand on the front handle, by a trained operator for pruning and dismantling standing tree c

39、rowns, and by persons having read and understood the safety requirements provided in the instruction handbook, using the appropriate personal protective equipment (PPE). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe wor

40、king practices to be provided by the manufacturer are specified.This part of ISO 11681 deals with all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufa

41、cturer.NOTE See Annex B for a list of significant hazards.This part of ISO 11681 is applicable to chain-saws manufactured after its date of publication.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edit

42、ion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 6531:2008, Machinery for forestry Po rtable chain-saws V ocabularyISO 6533, Forestry machinery Po rtable chain-saw front hand-guard D imensions and clearancesISO 6534, Fore

43、stry machinery Po rtable chain-saw hand guards M echanical strengthISO 6535, Portable chain-saws C hain brake performanceISO 7293, Forestry machinery Po rtable chain-saws E ngine performance and fuel consumptionISO 7914:2002, Forestry machinery Po rtable chain-saws M inimum handle clearance and size

44、sISO 7915, Forestry machinery Po rtable chain-saws D etermination of handle strengthISO 8334, Forestry machinery Po rtable chain-saws D etermination of balance and maximum holding momentISO 9518, Forestry machinery Po rtable chain-saws K ickback testISO 10726, Portable chain-saws C hain catcher D im

45、ensions and mechanical strengthISO 12100:2010 , Safety of machinery G eneral principles for design Risk assessment and risk reductionISO 13772, Forestry machinery Po rtable chain-saws N on-manually actuated chain brake performance ISO 2011 All rights reserved 1Copyright European Committee for Standa

46、rdization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHSBS EN ISO 11681-2:2011ISO 13849-1:2006, Safety of machinery S afety-related parts of control systems P art 1: General principles for designISO 13849-2, Safety of machinery S

47、afety-related parts of control systems P art 2: ValidationISO 13857:2008, Safety of machinery S afety distances to prevent hazard zones being reached by upper and lower limbsISO 14982:1998, Agricultural and forestry machinery E lectromagnetic compatibility T est methods and acceptance criteriaISO 22

48、867, Forestry and gardening machinery V ibration test code for portable hand-held machines with internal combustion engine V ibration at the handlesISO 22868, Forestry and gardening machinery N oise test code for portable hand-held machines with internal combustion engine E ngineering method (Grade

49、2 accuracy)IEC 60745-1:2006, Hand-held motor-operated electric tools S afety P art 1: General requirements3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 6531 and ISO 12100 and the following apply.NOTE Figure 1 shows an example of a chain-saw within the scope of this part of I