BS EN ISO 10081-3-2005 Classification of dense shaped refractory products - Part 3 Basic products containing from 7% to 50% residual carbon《致密定型耐火制品的分类 含残留碳在7%至50%之间的碱性制品》.pdf

《BS EN ISO 10081-3-2005 Classification of dense shaped refractory products - Part 3 Basic products containing from 7% to 50% residual carbon《致密定型耐火制品的分类 含残留碳在7%至50%之间的碱性制品》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 10081-3-2005 Classification of dense shaped refractory products - Part 3 Basic products containing from 7% to 50% residual carbon《致密定型耐火制品的分类 含残留碳在7%至50%之间的碱性制品》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN ISO 10081-3:2005Incorporating corrigendum October 2008Classification of dense shaped refractory products Part 3: Basic products containing from 7 % to 50 % residual carbonICS 81.080g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3

2、g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/02/2009 07:07, Uncontrolled Copy, (c) BSIBS EN ISO 10081-3:2005This British Standard was published under the authority of the Standards Pol

3、icy and S t r a t e g y C o m m i t t e e o n 12 December 2003 BSI 2008ISBN 978 0 580 63464 2National forewordThis British Standard is the UK implementation of EN ISO 10081-3:2005. It is identical with ISO 10081-3:2003. It supersedes BS EN 12475-3:1998 (dual numbered as BS 7225-1.4:1998) which is wi

4、thdrawn.The UK participation in its preparation was entrusted to Technical Committee RPI/1, Refractories. A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users a

5、re responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationAmd. No. Date Comments15909 March 2006 This corrigendum renumbers BS ISO 10081-3:2003 as BS EN ISO 10081-3:200530 Novemeber 2008A

6、ddition of supersession detailsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/02/2009 07:07, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORMEN ISO 10081-3 March 2005 ICS 81.080 Supersedes EN 12475-3:1998 English version Classification of dense shaped refractory

7、 products Part 3: Basic products containing from 7 % to 50 % residual carbon (ISO 10081-3:2003)Classification des produits rfractaires faonns denses Partie 3: Produits basiques contenant de 7 % 50 % de carbone rsiduel (ISO 10081-3:2003) Klassifizierung dichter geformter feuerfester Erzeugnisse Teil

8、3: Basische Erzeugnisse mit einem Massenanteil an Restkohlenstoff von 7 % bis 50 % (ISO 10081-3:2003) This European Standard was approved by CEN on 7 February 2005. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStanda

9、rd the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, G

10、erman). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic,

11、Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION

12、EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10081-3:2005: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/02/2009 07:07,

13、Uncontrolled Copy, (c) BSIForeword The text of ISO 10081-3:2003 has been prepared by Technical Committee ISO/TC 33,Refractories, of the International Organization for Standardization (ISO) and has been taken over as EN ISO 10081-3:2005 by Technical Committee CEN/TC 187, Refractory products and mater

14、ials, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2005, and conflicting national standards shall be withdrawn at the latest by September 2005

15、. This document supersedes EN 12475-3:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,

16、Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement noticeThe text of ISO 10081-3:2003 has been approved by CEN as EN ISO 10081-3:2005 without any modifications.

17、BS EN ISO 10081-3:2005Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/02/2009 07:07, Uncontrolled Copy, (c) BSI1Classification of dense shaped refractory products Part 3:Basic products containing from 7 % to 50 % residual carbon1ScopeThis part of ISO 10081 specifies the classification and

18、designation of dense shaped basic refractory productscontaining or more but less than residual carbon after coking. It is applicable to products with orwithout antioxidant additives, with or without metal plates and reinforcement.NOTE 1 ISO 10081-2 covers the classification of dense shaped basic pro

19、ducts containing less than residual carbon.NOTE 2 All bricks can be encased in metal plate and can be reinforced by means of an internal metal plate and/or mixedmetal fibre.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For datedrefer

20、ences, only the edition cited applies. For undated references, the latest edition of the referenced document(including any amendments) applies.ISO 10058, Magnesites and dolomites Chemical analysisISO 10060, Dense, shaped refractory products Test methods for products containing carbonISO 12677, Chemi

21、cal analysis of refractory products by XRF Fused cast bead method3 Classification3.1 Basis of classificationDense shaped basic products containing or more but less than residual carbon after coking shall beclassified according to the following five criteria:a) the type of product;b) the group determ

22、ined by its magnesia and carbon content as well as the presence of antioxidant additives;c) the state of the raw materials;d) the nature of the bond;e) any post-treatment.3.2 Type of productThe types of dense shaped refractory products of the basic series included in this classification area) magnes

23、ia carbon (MC),b) magnesia lime carbon (MLC) (containing lime and/or synthetic MgO-CaO co-clinker),7 % 50 %7%7 % 50 %BS EN ISO 10081-3:2005Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/02/2009 07:07, Uncontrolled Copy, (c) BSI2c) magnesia doloma carbon (MDC) (containing sintered natural

24、dolomite), andd) doloma carbon (DC) (containing sintered natural co-clinker).These product types shall be classified in accordance with Table 1, by their chemical analysis carried out on thecalcined products in accordance with ISO 10058 and ISO 12677.Residual carbon content shall be determined in ac

25、cordance with ISO 10060.3.3 Classification groupsThe product types shall be classified into groups according to their magnesia and carbon contents andaccording to the presence or absence of antioxidant additives.The product types without antioxidant additives shall be classified into groups accordin

26、g to Table 1. Two criteriashall be used for defining the group classification:a) the magnesia content of the product type;b) the residual carbon content after carbonization.For magnesia lime carbon and lime carbon products, limits on lime content is imposed on the various groups.The product types wi

27、th antioxidant additives shall be classified according to the same criteria with the additionof a suffix A indicating the presence of antioxidant additives.Table 1 Classification of magnesia carbon, magnesia doloma carbon anddoloma carbon productsProduct type GroupContentsResidual carbon content(mas

28、s fraction) (mass fraction)(calcined sample)MgO CaOMagnesia carbonMC 98/7MC 98/10MC 98/15MC 98/20MC 98/25MC 98/30Magnesia carbon MC 95/7MC 95/10MC 95/15MC 95/20MC 95/25MC 95/30Magnesia carbonMC 90/7MC 90/10MC 90/15MC 90/20MC 90/25MC 90/30%MgO greaterorequalslant 98 7 lessorequalslant C 10MgO greater

29、orequalslant 98 10 lessorequalslant C 15MgO greaterorequalslant 98 15 lessorequalslant C 20MgO greaterorequalslant 98 20 lessorequalslant C 25MgO greaterorequalslant 98 25 lessorequalslant C 30MgO greaterorequalslant 98 30 lessorequalslant C 5095 lessorequalslant MgO 98 7 lessorequalslant C 1095 les

30、sorequalslant MgO 98 10 lessorequalslant C 1595 lessorequalslant MgO 98 15 lessorequalslant C 2095 lessorequalslant MgO 98 20 lessorequalslant C 2595 lessorequalslant MgO 98 25 lessorequalslant C 3095 lessorequalslant MgO 98 30 lessorequalslant C 5090 lessorequalslant MgO 95 7 lessorequalslant C 109

31、0 lessorequalslant MgO 95 10 lessorequalslant C 1590 lessorequalslant MgO 95 15 lessorequalslant C 2090 lessorequalslant MgO 95 20 lessorequalslant C 2590 lessorequalslant MgO 95 25 lessorequalslant C 3090 lessorequalslant MgO 95 30 lessorequalslant C 50BS EN ISO 10081-3:2005Licensed Copy: Wang Bin,

32、 ISO/EXCHANGE CHINA STANDARDS, 04/02/2009 07:07, Uncontrolled Copy, (c) BSI3Magnesia carbonMC 85/7MC 85/10MC 85/15MC 85/20MC 85/25MC 85/30Magnesia carbonMC 80/7MC 80/10MC 80/15MC 80/20MC 80/25MC 80/30Magnesia lime carbonMLC 80/7MLC 80/10MLC 80/15MLC 80/20MLC 80/25MLC 80/30Magnesia lime carbon MLC 70

33、/7MLC 70/10MLC 70/15MLC 70/20MLC 70/25MLC 70/30Magnesia lime carbonMLC 60/7MLC 60/10MLC 60/15MLC 60/20MLC 60/25MLC 60/30Magnesia lime carbonMLC 50/7MLC 50/10MLC 50/15MLC 50/20MLC 50/25MLC 50/30Magnesia lime carbonMLC 40/7MLC 40/10MLC 40/15MLC 40/20MLC 40/25MLC 40/30Table 1 Classification of magnesia

34、 carbon, magnesia doloma carbon anddoloma carbon products (continued)Product type GroupContentsResidual carbon content(mass fraction) (mass fraction)(calcined sample)MgO CaO%85 lessorequalslant MgO 90 7 lessorequalslant C 1085 lessorequalslant MgO 90 10 lessorequalslant C 1585 lessorequalslant MgO 9

35、0 15 lessorequalslant C 2085 lessorequalslant MgO 90 20 lessorequalslant C 2585 lessorequalslant MgO 90 25 lessorequalslant C 3085 lessorequalslant MgO 90 30 lessorequalslant C 5080 lessorequalslant MgO 85 7 lessorequalslant C 1080 lessorequalslant MgO 85 10 lessorequalslant C 1580 lessorequalslant

36、MgO 85 15 lessorequalslant C 2080 lessorequalslant MgO 85 20 lessorequalslant C 2580 lessorequalslant MgO 85 25 lessorequalslant C 3080 lessorequalslant MgO 85 30 lessorequalslant C 5080 lessorequalslant MgO 90 CaO greaterorequalslant 10 7 lessorequalslant C 1080 lessorequalslant MgO 90 CaO greatero

37、requalslant 10 10 lessorequalslant C 1580 lessorequalslant MgO 90 CaO greaterorequalslant 10 15 lessorequalslant C 2080 lessorequalslant MgO 90 CaO greaterorequalslant 10 20 lessorequalslant C 2580 lessorequalslant MgO 90 CaO greaterorequalslant 10 25 lessorequalslant C 3080 lessorequalslant MgO 90

38、CaO greaterorequalslant 10 30 lessorequalslant C 5070 lessorequalslant MgO 80 CaO greaterorequalslant 20 7 lessorequalslant C 1070 lessorequalslant MgO 80 CaO greaterorequalslant 20 10 lessorequalslant C 1570 lessorequalslant MgO 80 CaO greaterorequalslant 20 15 lessorequalslant C 2070 lessorequalsl

39、ant MgO 80 CaO greaterorequalslant 20 20 lessorequalslant C 2570 lessorequalslant MgO 80 CaO greaterorequalslant 20 25 lessorequalslant C 3070 lessorequalslant MgO 80 CaO greaterorequalslant 20 30 lessorequalslant C 5060 lessorequalslant MgO 70 CaO greaterorequalslant 30 7 lessorequalslant C 1060 le

40、ssorequalslant MgO 70 CaO greaterorequalslant 30 10 lessorequalslant C 1560 lessorequalslant MgO 70 CaO greaterorequalslant 30 15 lessorequalslant C 2060 lessorequalslant MgO 70 CaO greaterorequalslant 30 20 lessorequalslant C 2560 lessorequalslant MgO 70 CaO greaterorequalslant 30 25 lessorequalsla

41、nt C 3060 lessorequalslant MgO 70 CaO greaterorequalslant 30 30 lessorequalslant C 5050 lessorequalslant MgO 60 CaO greaterorequalslant 40 7 lessorequalslant C 1050 lessorequalslant MgO 60 CaO greaterorequalslant 40 10 lessorequalslant C 1550 lessorequalslant MgO 60 CaO greaterorequalslant 40 15 les

42、sorequalslant C 2050 lessorequalslant MgO 60 CaO greaterorequalslant 40 20 lessorequalslant C 2550 lessorequalslant MgO 60 CaO greaterorequalslant 40 25 lessorequalslant C 3050 lessorequalslant MgO 60 CaO greaterorequalslant 40 30 lessorequalslant C 5040 lessorequalslant MgO 50 CaO greaterorequalsla

43、nt 50 7 lessorequalslant C 1040 lessorequalslant MgO 50 CaO greaterorequalslant 50 10 lessorequalslant C 1540 lessorequalslant MgO 50 CaO greaterorequalslant 50 15 lessorequalslant C 2040 lessorequalslant MgO 50 CaO greaterorequalslant 50 20 lessorequalslant C 2540 lessorequalslant MgO 50 CaO greate

44、rorequalslant 50 25 lessorequalslant C 3040 lessorequalslant MgO 50 CaO greaterorequalslant 50 30 lessorequalslant C 50BS EN ISO 10081-3:2005Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 04/02/2009 07:07, Uncontrolled Copy, (c) BSI4Magnesia lime carbonMLC 7MLC 10MLC 15MLC 20MLC 25MLC 30Magn

45、esia doloma carbonMDC 80/7MDC 80/10MDC 80/15MDC 80/20MDC 80/25Magnesia doloma carbon MDC 70/7MDC 70/10MDC 70/15MDC 70/20MDC 70/25Magnesia doloma carbonMDC 60/7MDC 60/10MDC 60/15MDC 60/20MDC 60/25Magnesia doloma carbonMDC 50/7MDC 50/10MDC 50/15MDC 50/20MDC 50/25Magnesia doloma carbonMDC 40/7MDC 40/10

46、MDC 40/15MDC 40/20MDC 40/25Doloma carbonDC 40/7DC 40/10DC 40/15DC 40/20DC 40/25Table 1 Classification of magnesia carbon, magnesia doloma carbon anddoloma carbon products (continued)Product type GroupContentsResidual carbon content(mass fraction) (mass fraction)(calcined sample)MgO CaO%MgO 40 CaO gr

47、eaterorequalslant 50 7 lessorequalslant C 10MgO 40 CaO greaterorequalslant 50 10 lessorequalslant C 15MgO 40 CaO greaterorequalslant 50 15 lessorequalslant C 20MgO 40 CaO greaterorequalslant 50 20 lessorequalslant C 25MgO 40 CaO greaterorequalslant 50 25 lessorequalslant C 30MgO 40 CaO greaterorequa

48、lslant 50 30 lessorequalslant C 5080 lessorequalslant MgO 90 CaO greaterorequalslant 10 7 lessorequalslant C 1080 lessorequalslant MgO 90 CaO greaterorequalslant 10 10 lessorequalslant C 1580 lessorequalslant MgO 90 CaO greaterorequalslant 10 15 lessorequalslant C 2080 lessorequalslant MgO 90 CaO gr

49、eaterorequalslant 10 20 lessorequalslant C 2580 lessorequalslant MgO 90 CaO greaterorequalslant 10 25 lessorequalslant C 3070 lessorequalslant MgO 80 CaO greaterorequalslant 20 7 lessorequalslant C 1070 lessorequalslant MgO 80 CaO greaterorequalslant 20 10 lessorequalslant C 1570 lessorequalslant MgO 80 CaO greaterorequalslant 20 15 lessorequalslant C 2070 lessorequalslant MgO 80 CaO greaterorequalslant 20 20 lessorequalslant C 2570 lessorequalslant MgO 80 CaO greaterorequalslant 20 25 lessorequalslant C 3060 lessorequalslant MgO 70 C