BS EN ISO 1833-6-2010 Textiles Quantitative chemical analysis Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc.pdf

《BS EN ISO 1833-6-2010 Textiles Quantitative chemical analysis Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 1833-6-2010 Textiles Quantitative chemical analysis Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 1833-6:2010Textiles Quantitativechemical analysisPart 6: Mixtures of viscose or certain typesof cupro or modal or lyocell and cottonfibres (method using formic acid and

2、 zincchloride) (ISO 1833-6:2007)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:30, Uncontrolled Copy, (c) BSIBS EN ISO 1833-6:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 1833-6:2010. It is identical to ISO 1833-6:2007. It super

3、sedes BS 4407:1988 which will be withdrawn on The UK participation in its preparation was entrusted to Technical Committee TCI/80, Chemical testing of textiles.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to inclu

4、de all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 72127 4 ICS 59.060.01 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Po

5、licy and Strategy Committee on 2011.Amendments issued since publicationDate Text affectedpublication of the other parts of the BS EN ISO 1833 series.28 FebruaryLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:30, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPIS

6、CHE NORM EN ISO 1833-6 October 2010 ICS 59.060.01 English Version Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) (ISO 1833-6:2007) Textiles - Analyse chimique quantit

7、ative - Partie 6: Mlanges de viscose ou de certains types de cupro, modal ou lyocell et de fibres de coton (mthode lacide formique et au chlorure de zinc) (ISO 1833-6:2007) Textilien - Quantitative chemische Analysen - Teil 6: Mischungen aus Viskose oder bestimmten Cupro-, Modal- oder Lyocellfasern

8、und Baumwollfasern (Ameisensure-/Zinkchlorid-Verfahren) (ISO 1833-6:2007) This European Standard was approved by CEN on 12 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nation

9、al standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in an

10、y other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, De

11、nmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALI

12、SATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1833-6:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:

13、30, Uncontrolled Copy, (c) BSIBS EN ISO 1833-6:2010EN ISO 1833-6:2010 (E) 3 Foreword The text of ISO 1833-6:2007 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 1833-6:2010 by Technical Commit

14、tee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be with

15、drawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations,

16、the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Neth

17、erlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1833-6:2007 has been approved by CEN as a EN ISO 1833-6:2010 without any modification. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/20

18、11 07:30, Uncontrolled Copy, (c) BSIBS EN ISO 1833-6:2010ISO 1833-6:2007(E) ISO 2007 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is n

19、ormally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part i

20、n the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prep

21、are International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that s

22、ome of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1833-6 was prepared by Technical Committee ISO/TC 38, Textiles. This method supersedes Clause 5 of ISO 1833:1977. ISO 1833 consists of the fo

23、llowing parts, under the general title Textiles Quantitative chemical analysis: Part 1: General principles of testing Part 2: Ternary fibre mixtures Part 3: Mixtures of acetate and certain other fibres (method using acetone) Part 4: Mixtures of certain protein and certain other fibres (method using

24、hypochlorite) Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) Part 7: Mixtures of polyamide and certain other fibres (m

25、ethod using formic acid) Part 8: Mixtures of acetate and triacetate fibres (method using acetone) Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) Part 11: Mixtures o

26、f cellulose and polyester fibres (method using sulfuric acid) Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon d

27、isulfide/acetone) Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:30, Uncontrolled Copy, (c) BSIBS EN ISO 1833-6:2010ISO 1833-6:2007(E) iv ISO 2007 All rights reserved Part 15: Mixtures of jute and

28、certain animal fibres (method by determining nitrogen content) Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) Part 18: Mixtures of silk a

29、nd wool or hair (method using sulfuric acid) Part 19: Mixtures of cellulose fibres and asbestos (method by heating) Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) The following parts are under pre

30、paration: Part 20: Mixtures of elastane and some other fibres (method using dimethylacetamide) Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride) Part 23: Mixtures of polyethylene and polypropylene (method using cyc

31、lohexanone) Part 24: Mixtures of polyester and some other fibres (method using phenol and tetrachloroethane) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:30, Uncontrolled Copy, (c) BSIBS EN ISO 1833-6:2010INTERNATIONAL STANDARD ISO 1833-6:2007(E) ISO 2007 All rights reserved

32、1Textiles Quantitative chemical analysis Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) 1 Scope This part of ISO 1833 specifies a method, using a mixture of formic acid and zinc chloride, to determine the perce

33、ntage of cotton, after removal of non-fibrous matter, in textiles made of binary mixtures of viscose or some cupro, modal and lyocell fibres, with cotton. If a cupro or modal or lyocell fibre is found to be present, a preliminary test is carried out to see whether it is soluble in the reagent. The m

34、ethod is not applicable to mixtures in which the cotton has suffered extensive chemical degradation, nor when the viscose, cupro, modal or lyocell fibre is rendered incompletely soluble by the presence of certain permanent finishes or reactive dyes that cannot be removed completely. WARNING This par

35、t of ISO 1833 calls for the use of substances/procedures that may be injurious to the health/environment if appropriate conditions are not observed. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety/environment at any stage. 2

36、Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1833-1, Textiles Quantit

37、ative chemical analysis Part 1: General principles of testing 3 Principle The viscose, cupro, modal or lyocell fibre is dissolved out from a known dry mass of the mixture, with a reagent composed of formic acid and zinc chloride. The residue is collected, washed, dried and weighed; its corrected mas

38、s is expressed as a percentage of the dry mass of the mixture. The percentage of viscose, cupro, modal or lyocell fibre is found by difference. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:30, Uncontrolled Copy, (c) BSIBS EN ISO 1833-6:2010ISO 1833-6:2007(E) 2 ISO 2007 All ri

39、ghts reserved4 Reagents Use the reagents described in ISO 1833-1, together with those specified in 4.1 and 4.2. 4.1 Formic acid/zinc chloride reagent. Prepare a solution containing 20 g of anhydrous zinc chloride (minimum assay to be 98 %) and 68 g of anhydrous formic acid, made up to 100 g with wat

40、er. The harmful effects of this reagent should be borne in mind, and full precautions should be taken in its use. 4.2 Ammonia, dilute solution. Dilute 20 ml of concentrated ammonia solution ( 0,880 g/ml) to 1 I with water. 5 Apparatus Use the apparatus described in ISO 1833-1, together with those de

41、scribed in 5.1 and 5.2. 5.1 Conical flask, minimum capacity 200 ml, glass-stoppered. 5.2 Heating apparatus, suitable for maintaining the temperature of the flask at (40 2) C or (70 2) C. 6 Test procedure Follow the general procedure described in ISO 1833-1, and then proceed as follows. Place the spe

42、cimen without delay in the conical flask preheated to 40 C. Add 100 ml of formic acid/zinc chloride reagent per gram of specimen, preheated to 40 C. Stopper the flask and shake it. Allow the flask and contents to remain at 40 C for 2 h 30 min, shaking it twice during this time at intervals of about

43、45 min. In case of difficulties dissolving some man-made fibres at 40 C, apply the same procedure but at 70 C for 20 min. Filter the contents of the flask through the weighed filter crucible and wash any fibres from the flask into the crucible with the reagent. Rinse with a further 20 ml of reagent,

44、 preheated to 40 C. Wash the crucible and residue thoroughly with water at 40 C (or at 70 C when applicable). Rinse the residue with 100 ml of cold ammonia solution, ensuring that the residue remains totally immersed in the solution for 10 min, then rinse with cold water. Do not apply suction until

45、each washing liquor has drained under gravity. Finally, drain the crucible using suction, dry the crucible and residue, and cool and weigh them. 7 Calculation and expression of results Calculate the results as described in the general instructions of ISO 1833-1. The value of d is 1,02 for all types

46、of cotton, except when the temperature of 70 C is applied; then d is 1,03. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:30, Uncontrolled Copy, (c) BSIBS EN ISO 1833-6:2010ISO 1833-6:2007(E) ISO 2007 All rights reserved 38 Precision On a homogeneous mixture of textile material

47、s, the confidence limits of the results obtained by this method are not greater than 2 for the confidence level of 95 %. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:30, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STA

48、NDARDS, 26/05/2011 07:30, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:30, Uncontrolled Copy, (c) BSIBSI is the independent national body responsible for preparing British Standardsand other standards-related publicat

49、ions, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the lates