BS EN ISO 105-N02-1995 Textiles Tests for colour fastness Colour fastness to bleaching Peroxide《纺织品 色牢度试验 第N02部分 耐漂泊色牢度 过氧化物》.pdf

《BS EN ISO 105-N02-1995 Textiles Tests for colour fastness Colour fastness to bleaching Peroxide《纺织品 色牢度试验 第N02部分 耐漂泊色牢度 过氧化物》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 105-N02-1995 Textiles Tests for colour fastness Colour fastness to bleaching Peroxide《纺织品 色牢度试验 第N02部分 耐漂泊色牢度 过氧化物》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 105-N02:1995 Textiles Tests for colour fastness Part N02: Colour fastness to bleaching Peroxide The European Standard EN ISO 105-N02:1995 has the status of a British StandardBSENISO105-N02:1995 This British Standard, having been prepared under the directionof the Sector Bo

2、ard forMaterials and Chemicals, waspublished under the authorityof the Standards Boardand comes into effect on 15June1995 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference TCI/25 Special announcement in BSINews, August1994 ISBN 0 580 23762 1 Committees

3、 responsible for this British Standard The United Kingdom participation in the preparation of this British Standard was entrusted to Technical Committee TCI/25 Chemical properties, upon which the following bodies were represented: Association of Consulting Scientists Association of Suppliers to the

4、British Clothing Industry British Retail Consortium British Textile Confederation Chemical Industries Association Home Laundering Consultative Council International Wool Secretariat Mail Order Traders Association Ministry of Defence National Wool Textile Export Corporation SATRA Footwear Technology

5、Centre Soap and Detergent Industry Association Society of Dyers and Colourists Textile Finishers Association Textile Research Council (FCRA) Participation in the detailed technical work was undertaken by the Society of Dyers and Colourists. Amendments issued since publication Amd. No. Date CommentsB

6、SENISO105-N02:1995 BSI 10-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 1 Scope 3 2 Normative references 3 3 Principle 3 4 Apparatus and reagents 3 5 Test specimen 4 6 Procedure 4 7 Test report 5 Annex ZA (normative) Normative references to internatio

7、nal publications with their relevant European publications 6 Table 1 Bleaching bath 4 Table 2 Single-fibre adjacent fabrics 4 List of references Inside back coverBSENISO105-N02:1995 ii BSI 10-1999 National foreword This British Standard has been prepared by Technical Committee TCI/25, and is the Eng

8、lish language version of ENISO105-N02:1995 Textiles Tests for colour fastness Part N02: Colour fastness to bleaching Peroxide, published by the European Committee for Standardization (CEN), which is identical with ISO105-N02:1993, published by the International Organization for Standardization (ISO)

9、. This British Standard supersedes the corresponding method in BS1006:1990, which is withdrawn by amendment. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British

10、Standard does not of itself confer immunity from legal obligations. Cross-references Publication referred to Corresponding British Standard BS EN 20105:1993 Textiles Tests for colour fastness ISO 105-A01:1989 Part A01:1993 General principles of testing ISO 105-A02:1993 Part A02:1993 Grey scale for a

11、ssessing change in colour ISO 105-A03:1993 Part A03:1993 Grey scale for assessing staining ISO 105-F:1985 BS 1006:1990 Methods of test for colour fastness of textiles and leather ISO 105-F10:1989 BS 1006:1990 Methods of test for colour fastness of textiles and leather Summary of pages This document

12、comprises a front cover, an inside front cover, pages i and ii, theEN ISOtitle page, pages 2 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front co

13、ver.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 105-N02 April 1995 ICS 59.080.10 Descriptors: Textiles, dyes, tests, determination, colour fastness, bleaching, hydorgen peroxide English version Textiles Tests for colour fastness Part N02: Colour fastness to bleaching Peroxide (ISO 105-N

14、02:1993) Textiles Essais de solidit des teintures Partie N02: Solidit des teintures au blanchiment Peroxyde (ISO 105-N02:1993) Textilien Farbechtheitsprfungen Teil N02: Bestimmung der Farbechtheit gegen Bleichen Peroxid (ISO 105-N02:1993) This European Standard was approved by CEN on 1994-12-22. CEN

15、 members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appl

16、ication to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has

17、the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standa

18、rdization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1995 Copyright reserved to CEN members Ref. No. EN ISO105-N02:1995 EENISO105-N02:1995 BSI 10-1999 2 Foreword The text of the International Standard has been taken as a Eur

19、opean Standard by the Technical Committee CEN/TC248, Textiles and textile products, from ISO/TC38, Textiles, of the International Organization for Standardization (ISO). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsem

20、ent, at the latest by October1995, and conflicting national standards shall be withdrawn at the latest by October1995. According to CEN/CENELEC Internal Regulations the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ice

21、land, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom. NOTENormative references to international publications are listed inAnnex ZA (normative).ENISO105-N02:1995 BSI 10-1999 3 1 Scope This part of ISO105 specifies a method for determining the res

22、istance of the colour of textiles of all kinds, and in all forms, to the action of bleaching baths containing peroxide in concentrations commonly used in textile processing. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions

23、 of this part of ISO105. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO105 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. M

24、embers of IEC and ISOmaintain registers of currently valid International Standards. ISO 105-A01:1989, Textiles Tests for colour fastness Part A01: General principles of testing. ISO 105-A02:1993, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour. ISO 105-A03:1993

25、, Textiles Tests for colour fastness Part A03: Grey scale for assessing staining. ISO 105-F:1985, Textiles Tests for colour fastness Part F: Standard adjacent fabrics. ISO 105-F10:1989, Textiles Tests for colour fastness Part F10: Specification for adjacent fabric:Multifibre. 3 Principle A specimen

26、of the textile in contact with one or two specified adjacent fabrics is immersed in the bleaching solution, rinsed and dried. The change in colour of the specimen and the staining of the adjacent fabric(s) are assessed with the grey scales. 4 Apparatus and reagents 4.1 Test tube, of diameter and len

27、gth such that the composite specimen roll will have a reasonably snug fit in the tube and be covered by the bleaching solution (4.3). 4.2 Reflux condenser, fitting the test tube (4.1), to reduce evaporation from the bleaching bath during the test. 4.3 Bleaching bath, of the composition given inTable

28、 1. Prepare the bleaching bath as follows: Place cold grade3 water (4.7) in the bath. Add sodium silicate (orsodium pyrophosphate for bath3). Add magnesium chloride. Adjust the pH. Add hydrogen peroxide. Heat to the appropriate temperature specified inTable 1. 4.4 Adjacent fabrics, each measuring40m

29、m 100mm (see ISO 105-A01:1989, subclause 8.3). Either: 4.4.1 A multifibre adjacent fabric complying withISO105-F10. Or: 4.4.2 Two single-fibre adjacent fabrics, complying with the relevant sections of F01toF08 of ISO105-F:1985, one piece being made of the same kind of fibre as that of the textile to

30、 be tested, or that predominating in the case of blends, and the second piece being made of the fibre as indicated inTable 2, or, in the case of blends, of the kind of fibre second in order or predominance, or as otherwise specified. 4.5 If required, a non-dyeable fabric (for example polypropylene).

31、 4.6 Grey scale for assessing change in colour, complying with ISO105-A02, and grey scale for assessing staining, complying with ISO105-A03. 4.7 Grade 3 water (see ISO105-A01:1989, clause 8.2).ENISO105-N02:1995 4 BSI 10-1999 Table 1 Bleaching bath Table 2 Single-fibre adjacent fabrics 5 Test specime

32、n 5.1 If the textile to be tested is fabric, a) attach a specimen measuring40mm 100mm to a piece of the multifibre adjacent fabric (4.4.1), also measuring40mm 100mm, by sewing along one of the shorter sides, with the multifibre fabric next to the face of the specimen; or b) attach a specimen measuri

33、ng40mm 100mm between the two single-fibre adjacent fabrics (4.4.2), also measuring40mm 100mm, by sewing along one of the shorter sides. 5.2 Where yarn or loose fibre is to be tested, take a mass of the yarn or loose fibre approximately equal to one-half of the combined mass of the adjacent fabrics a

34、nd a) place it between a40mm 100mm piece of the multifibre adjacent fabric and a40mm 100mm piece of the non-dyeable fabric (4.5) and sew them along all four sides (see ISO105-A01:1989, subclause9.6); or b) place it between a40mm 100mm piece of each of the two specified single-fibre fabrics and sew a

35、long all four sides. 6 Procedure 6.1 Loosely roll the composite specimen in the direction of the long edge, place the40mm roll into the test tube containing the appropriate bleaching solution (seeTable 1) and keep it well covered by the bleaching solution for the time and at the temperature indicate

36、d inTable 1. Starting bath Bath 1 Bath 2 Bath 3 Bath 4 per litre of grade 3 water (4.7) for natural and regenerated cellulose for natural and regenerated cellulose for wool and acetate for silk Hydrogen peroxide solution, aml 5 20 20 Sodium peroxide, bg 3 Sodium silicate solution, cml 5 5 5 Sodium p

37、yrophosphate, dg 5 Magnesium chloride, eg 0,1 0,1 0,1 pH, initial value 0,2 f 10,5 11,5 9,3 g 10,0 Temperature, C 2 C 90 80 50 70 Duration of treatment, h 1 1 2 2 Liquor ratio 30: 1 30 : 1 30 : 1 30 : 1 a Containing 304 g/l H 2 O 2( 275 g/kg H 2 O 2 ). If the concentration differs from this value, t

38、he appropriate volume shall be taken. b 100 % Na 2 O 2 . c Relative density at 20 C = 1,32; SiO 2 /Na 2 O ratio . 2,7:1. d Na 4 P 2 O 7 .10H 2 O. e MgCl 2 6H 2 O. f Adjust by addition of NaOH solution, if necessary. g The pH of the bath at the end of the test shall not be less than9,0. If first adja

39、cent fabric is Second piece to be Wool, silk, linen, viscose, polyester, acrylic Cotton Cotton, acetate ViscoseENISO105-N02:1995 BSI 10-1999 5 6.2 Remove the composite specimen, rinse it for10min in cold, running tap-water and squeeze it. Open out the composite specimen by breaking the stitching on

40、all sides except one of the shorter sides and dry by hanging it in air at a temperature not exceeding60 C with the parts in contact only at the remaining line of stitching. 6.3 Assess the change in colour of the specimen and the staining of the adjacent fabric(s) with the grey scales (4.6). 7 Test r

41、eport The test report shall include the following particulars: a) the number and date of publication of this part of ISO105, i.e.ISO105-N02:1993; b) all details necessary for the identification of the sample tested; c) the number of the bleaching bath used; d) the numerical rating for change in colo

42、ur of the specimen; e) if single-fibre adjacent fabrics were used, the numerical rating for staining of each kind of adjacent fabric used; f) if a multifibre adjacent was used, the type of multifibre adjacent fabric used and the staining of each type of fibre in the multifibre adjacent fabric.ENISO1

43、05-N02:1995 6 BSI 10-1999 Annex ZA (normative) Normative references to international publications with their relevant European publications This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate

44、places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication

45、referred to applies (including amendments). Publication Year Title EN/HD Year ISO 105-A01 1989 Textiles Test for colour fastness Part A01: General principles of testing EN 20105-A01 1992 ISO 105-A02 1993 Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour EN 20105-

46、A02 1994 ISO 105-A03 1993 Textiles Tests for colour fastness Part A03: Grey scale for assessing staining EN 20105-A03 1994BSENISO105-N02:1995 BSI 10-1999 List of references See national foreword.BS EN ISO 105-N02:1995 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the

47、 independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that

48、they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the

49、 identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it