BS EN 62820-1-1-2016 Building intercom systems System requirements General《建筑对讲系统 系统要求 总则》.pdf

《BS EN 62820-1-1-2016 Building intercom systems System requirements General《建筑对讲系统 系统要求 总则》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62820-1-1-2016 Building intercom systems System requirements General《建筑对讲系统 系统要求 总则》.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、Building intercom systemsPart 1-1: System requirements GeneralBS EN 62820-1-1:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62820-1-1:2016. It isidentical to IEC 62820-1-1:2016.The UK partici

2、pation in its preparation was entrusted by TechnicalCommittee GW/1, Electronic security systems, to Subcommittee GW/1/8,Access control.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provi

3、sions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 87351 5ICS 13.320Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published und

4、er the authority of theStandards Policy and Strategy Committee on 31 December 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62820-1-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62820-1-1 November 2016 ICS 13.320 English Version Building inte

5、rcom systems - Part 1-1: System requirements - General (IEC 62820-1-1:2016) Systmes dinterphone de btiment - Partie 1-1: Exigences du systme - Gnralits (IEC 62820-1-1:2016) Gebude-Sprechanlagen - Teil 1-1: Generelle Systemanaforderungen (IEC 62820-1-1:2016) This European Standard was approved by CEN

6、ELEC on 2016-10-27. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standa

7、rds may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language

8、 and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,

9、Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normali

10、sation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62820-1-1:2016 E BS EN 62820-1-1:2016EN 6

11、2820-1-1:2016 2 European foreword The text of document 79/559/FDIS, future edition 1 of IEC 62820-1-1, prepared by IEC/TC 79 “Alarm and electronic security systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62820-1-1:2016. The following dates are fixed: latest date

12、 by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-07-27 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-10-27 Attention is drawn to the possibility tha

13、t some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62820-1-1:2016 was approved by CENELEC as a European Standard wit

14、hout any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 62676-4:2014 NOTE Harmonized as EN 62676-4:2015. BS EN 62820-1-1:2016EN 62820-1-1:2016 3 Annex ZA (normative) Normative references to international publications wit

15、h their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document

16、 (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.

17、eu. Publication Year Title EN/HD Year IEC 60065 (mod) 2014 Audio, video and similar electronic apparatus - Safety requirements EN 60065 2014 IEC 60529 1989 Degrees of protection provided by enclosures (IP Code) EN 60529 1991 - - + corrigendum May 1993 + A1 1999 + A1 2000 + A2 2013 + A2 2013 IEC 6095

18、0-1 (mod) 2005 Information technology equipment - Safety - Part 1: General requirements EN 60950-1 2006 - - + A11 2009 - - + A12 2011 - - + AC 2011 IEC 61000-6-1 - Electromagnetic compatibility (EMC) Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial env

19、ironments FprEN 61000-6-1 - IEC 61000-6-3 - Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments EN 61000-6-3 - IEC 62262 - Degrees of protection provided by enclosures for electrical equipment against ext

20、ernal mechanical impacts (IK code) EN 62262 - IEC 62599-1 - Alarm systems - Part 1: Environmental test methods - - IEC 62599-2 - Alarm systems - Part 2: Electromagnetic compatibility - Immunity requirements for components of fire and security alarm systems - - ISO 12233 2014 Photography - Electronic

21、 still picture imaging - Resolution and spatial frequency responses - - ITU-T P.501 - Test signals for use in telephonometry - - ITU-T P.50 - Artificial voices - - ITU-T P.51 1996 Artificial mouth - - ITU-T P.79 2007 Calculation of loudness ratings for telephone sets - - BS EN 62820-1-1:2016 2 IEC 6

22、2820-1-1:2016 IEC 2016 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references. 8 3 Terms, definitions and abbreviations 9 3.1 Terms and definitions 9 3.2 Abbreviations 11 4 Functional requirements 11 4.1 Basic functional requirements 11 4.1.1 General . 11 4.1.2 Requirements for buil

23、ding intercom system with SMU . 12 4.2 Additional functions . 13 5 Performance requirements . 13 5.1 Audio characteristics . 13 5.1.1 Acoustic pressure level 13 5.1.2 Overall loudness rating (OLR) 13 5.1.3 Overall sensitivity . 13 5.1.4 Frequency response . 15 5.1.5 Acoustic distortion 15 5.1.6 Chan

24、nel S/N ratio . 15 5.1.7 Sidetone masking rating (STMR) 15 5.1.8 Idle channel noise 15 5.1.9 Ringtone sound pressure . 15 5.1.10 Acoustic stability (Larsen effect) . 15 5.1.11 Acoustic safety 15 5.2 Video characteristics . 16 5.2.1 Image resolution 16 5.2.2 Gray scale . 16 5.2.3 Focus distance . 16

25、5.2.4 Color reproduction . 16 5.2.5 Environmental illuminance adaptability . 16 5.3 Environmental adaptability requirements 16 5.3.1 Environmental classes . 16 5.3.2 Environmental adaptability . 16 5.4 Safety requirements 17 5.5 Additional protection under fault conditions 17 5.6 Electromagnetic com

26、patibility requirements . 18 5.6.1 Electromagnetic compatibility immunity requirements 18 5.6.2 Additional electromagnetic compatibility immunity requirements 18 5.6.3 Electromagnetic compatibility emission requirements 18 5.7 Markings and mechanical structural requirements 18 5.7.1 Markings 18 5.7.

27、2 Mechanical structure 19 5.7.3 Enclosure protection capability . 19 5.7.4 Anti-vandalism . 19 6 Test methods . 19 BS EN 62820-1-1:2016IEC 62820-1-1:2016 IEC 2016 3 6.1 Test conditions 19 6.1.1 Test environmental conditions 19 6.1.2 Electrical connection 20 6.2 Function test . 20 6.3 Audio character

28、istics test 20 6.4 Video characteristics test 20 6.5 Environmental adaptability test 20 6.6 Safety test 20 6.7 Protection under fault conditions test . 20 6.8 Electromagnetic compatibility test 20 6.8.1 Electromagnetic compatibility immunity test 20 6.8.2 Additional electromagnetic compatibility imm

29、unity test 20 6.8.3 Electromagnetic compatibility emission test 21 6.9 Markings and mechanical structure test . 21 6.9.1 Markings and scrub resistance test . 21 6.9.2 Mechanical structure test . 21 6.9.3 Enclosure protection capability test 21 6.9.4 Anti-vandalism test . 21 7 Documentation 22 Annex

30、A (normative) Test of audio characteristics . 23 A.1 Test conditions 23 A.2 Acoustic pressure level test . 23 A.2.1 Methods . 23 A.2.2 Calibration of test equipment 24 A.2.3 Test of the acoustic pressure level . 24 A.3 Overall loudness rating (OLR) test . 25 A.3.1 Measurement of sound pressure Pmat

31、the MRP . 25 A.3.2 Measurement of output sound pressure Poof the hands-free EUT . 25 A.3.3 Measurement of output sound pressure Peof the handset EUT . 26 A.3.4 Calculations of the OLR . 27 A.4 Overall sensitivity test . 28 A.4.1 Test of the overall sensitivity at the hands-free EUT 28 A.4.2 Test of

32、the overall sensitivity at the handset EUT 28 A.5 Frequency response test . 28 A.6 Acoustic distortion test 29 A.7 Channel S/N ratio test . 29 A.8 Sidetone masking rating (STMR) test . 29 A.9 Idle channel noise test 30 A.10 Ringtone sound pressure test 30 A.11 Acoustic stability (Larsen Effect) test

33、 . 30 A.12 Acoustic safety test . 31 Annex B (normative) Test of video characteristics . 33 B.1 Test conditions 33 B.2 Connection of the tested system 33 B.3 Image resolution test . 33 B.4 Gray scale test 34 B.5 Focus distance test . 34 B.6 Color reproduction test 35 B.7 Environmental illumination a

34、daptability test 36 BS EN 62820-1-1:2016 4 IEC 62820-1-1:2016 IEC 2016 Annex C (normative) Different requirements between grade 1 and grade 2 37 Annex D (normative) Safety requirements correspondence in IEC 60065 or IEC 60950-1 . 39 Bibliography . 40 Figure 1 Overall sensitivity at the hands-free un

35、it . 14 Figure 2 Overall sensitivity at the handset unit 14 Figure A.1 Measurement of sound pressure Pmat the MRP 25 Figure A.2 Measurement of output sound pressure Powhen connected with the handset unit 25 Figure A.3 Measurement of output sound pressure Powhen connected with the hands-free unit . 2

36、6 Figure A.4 Measurement of output sound pressure Pewhen connected with the handset unit 26 Figure A.5 Measurement of output sound pressure Pewhen connected with the hands-free unit . 26 Figure A.6 Measurement of STMR at the handset EUT . 30 Figure A.7 Measurement of ringtone sound pressure 30 Figur

37、e A.8 Acoustic stability test for handset EUT . 31 Figure A.9 Acoustic stability test for hands-free EUT 31 Figure A.10 Acoustic safety test . 32 Figure B.1 Connection diagram for test of video characteristics . 33 Figure B.2 TE170 test chart . 34 Figure B.3 TE83 test chart . 34 Figure B.4 Focus tes

38、t chart 35 Figure B.5 Position of the external ring area . 35 Figure B.6 TE106 test chart . 36 Table 1 Environmental adaptability requirements 17 Table A.1 Factors for OLR . 28 Table C.1 Requirements of grade 1 and grade 2 . 37 Table D.1 Correspondence between IEC 60065 and IEC 60950-1 . 39 BS EN 62

39、820-1-1:2016IEC 62820-1-1:2016 IEC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ BUILDING INTERCOM SYSTEMS Part 1-1: System requirements General FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnic

40、al committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, T

41、echnical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, gover

42、nmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions o

43、r agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for internationa

44、l use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to

45、promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly i

46、ndicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies

47、. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property d

48、amage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this p

49、ublication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62820-1-1 has been prepared by IEC technical committee 79: Alarm and electronic security systems. The text o