BS EN 62310-3-2008 Static transfer nsystems (STS) — nPart 3 Method for specifying performance nand test requirements《静态转换系统(STS) 指定性能和试验要求的方法》.pdf

《BS EN 62310-3-2008 Static transfer nsystems (STS) — nPart 3 Method for specifying performance nand test requirements《静态转换系统(STS) 指定性能和试验要求的方法》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62310-3-2008 Static transfer nsystems (STS) — nPart 3 Method for specifying performance nand test requirements《静态转换系统(STS) 指定性能和试验要求的方法》.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、Static transfer systems (STS) Part 3: Method for specifying performanceand test requirementsBS EN 62310-3:2008raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/08/2009 03:55,

2、 Uncontrolled Copy, (c) BSINational forewordThis British Standard is the UK implementation of EN 62310-3:2008. It isidentical to IEC 62310-3:2008.The UK participation in its preparation was entrusted to Technical CommitteePEL/22, Power electronics.A list of organizations represented on this committe

3、e can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 57791 8ICS 29.200; 29.240.30BRITISH STANDARDBS EN 62310-3:2008Compliance with a British Stand

4、ard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 30 April 2009Amendments issued since publicationAmd. No. Date Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/08/2009 03:55

5、, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 62310-3 NORME EUROPENNE EUROPISCHE NORM September 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassar

6、t 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62310-3:2008 E ICS 29.200; 29.240.30 English version Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements (IEC

7、 62310-3:2008) Systmes de transfert statique (STS) - Partie 3: Mthode de spcification des performances et exigences dessai (CEI 62310-3:2008) Statische Transfersysteme - Teil 3: Verfahren fr die Festlegung des Betriebsverhaltens und Prfanforderungen(IEC 62310-3:2008) This European Standard was appro

8、ved by CENELEC on 2008-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such natio

9、nal standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language

10、 and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

11、 Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/08/2009 03:55, Uncontrolled Copy, (c) BSIEN 62310-3:2008 - 2 - Foreword The text of docu

12、ment 22H/105/FDIS, future edition 1 of IEC 62310-3, prepared by SC 22H, Uninterruptible power systems (UPS), of IEC TC 22, Power electronic systems and equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62310-3 on 2008-07-01. The following dates were fixed: l

13、atest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-07-01 Annex ZA has been added by CENELEC. _ Endor

14、sement notice The text of the International Standard IEC 62310-3:2008 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60664-3 NOTE Harmonized as HD 625.3 S1:1997

15、(not modified). HD 625.3 S1 is superseded by EN 60664-3:2003 which is based on IEC 60664-3:2003. IEC 60947-1 NOTE Harmonized as EN 60947-1:2007 (not modified). IEC 60990 NOTE IEC 60990:1990 is superseded by IEC 60990:1999, which is harmonized as EN 60990:1999 (not modified). IEC 61140 NOTE Harmonize

16、d as EN 61140:2002 (not modified). IEC 61400-1 NOTE Harmonized as EN 61400-1:2005 (not modified). IEC 62040-2 NOTE Harmonized as EN 62040-2:2006 (not modified). IEC 62040-1-1 NOTE Harmonized as EN 62040-1-1:2003 (not modified). IEC 62040-1-2 NOTE Harmonized as EN 62040-1-2:2003 (not modified). _ BS

17、EN 62310-3:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/08/2009 03:55, Uncontrolled Copy, (c) BSI- 3 - EN 62310-3:2008 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indisp

18、ensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by

19、 (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068 Series Environmental testing EN 60068 Series IEC 60146-1-1 -1)Semiconductor convertors - General requirements and line commutated convertorsPart 1-1: Specification of basic requirements EN 60146-1-1 19932)IEC 60439-1 -1)

20、Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies EN 60439-1 19992)IEC 60529 -1)Degrees of protection provided by enclosures (IP Code) EN 60529 + corr. May 19912)1993 IEC 60947-6-1 -1)Low-voltage switchgear and controlgear - Part 6-1: Multip

21、le function equipment - Transfer switching equipment EN 60947-6-1 20052)IEC 60950-1 (mod) -1)Information technology equipment - Safety - Part 1: General requirements EN 60950-1 20062)IEC 61000-2-2 -1)Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency

22、 conducted disturbances and signalling in public low-voltage power supply systems EN 61000-2-2 20022)IEC 62040-3 (mod) -1)Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements EN 62040-3 20012)IEC 62310-1 -1)Static transfer systems (STS) - Part 1: G

23、eneral and safety requirements EN 62310-1 20052)IEC 62310-2 (mod) -1)Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements EN 62310-2 20072)ISO 7779 -1)Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment EN I

24、SO 7779 20012)1)Undated reference. 2)Valid edition at date of issue. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/08/2009 03:55, Uncontrolled Copy, (c) BSI 2 62310-3 IEC:2008 CONTENTS 1 Scope.6 2 Normative references .6 3 Terms and definitions .7 3.1 General definitions 7 3.2 Specified

25、values 10 3.3 Input values.11 3.4 Output values11 4 Performance requirements .12 4.1 Declared electrical characteristics .12 4.1.1 Performance classification.12 4.1.2 Main electrical characteristics13 4.2 Normal service conditions .14 4.3 Transfer characteristics .14 4.3.1 Load voltage14 4.3.2 Cross

26、-current 15 4.4 Neutral management .15 4.4.1 Common neutral 15 4.4.2 Separately derived neutrals .15 4.4.3 Neutral current 15 4.4.4 Protective earth current .15 4.5 Performance requirements to be identified by the purchaser .16 5 STS tests .16 5.1 General .16 5.1.1 Type tests .16 5.1.2 Routine tests

27、 .16 5.1.3 Site tests .16 5.1.4 Testing schedule .16 5.2 Electrical tests.18 5.2.1 Insulation and dielectric.18 5.2.2 Light load and functional test.18 5.2.3 No load19 5.2.4 Rated load.19 5.2.5 Transfer.19 5.2.6 Source tolerance .21 5.2.7 Overload and fault current .21 5.2.8 Operating losses .23 5.2

28、.9 Backfeed .24 5.2.10 Abnormal operating conditions 25 5.3 Transportation and environment 26 5.3.1 General .26 5.3.2 Impact and shock 26 5.3.3 Free fall.26 5.3.4 Storage .27 5.3.5 Temperature and humidity .28 5.3.6 Acoustic noise .28 BS EN 62310-3:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STA

29、NDARDS, 11/08/2009 03:55, Uncontrolled Copy, (c) BSI62310-3 IEC:2008 3 Annex A (normative) Reference load29 Annex B (normative) STS voltage sensing tolerance33 Annex C (informative) Neutral management in static transfer systems .35 Annex D (normative) Neutral switching in static transfer systems Add

30、itional requirements.37 Annex E (informative) Purchaser specification guidelines 39 Annex F (informative) Output short circuit test procedure.43 Annex G (normative) Backfeed protection test .47 Annex H (normative) Minimum and maximum cross-sections of copper conductors suitable for connection48 Bibl

31、iography49 Figure 1 Complying load current flow - Common grounding of a.c. input sources - common STS neutral 15 Figure 2 Objectionable load current flow - Independent grounding of a.c. input sources - common STS neutral .16 Figure 3 STS cross current test20 Figure 4 Typical circuit for measuring co

32、nduction losses24 Figure B.1 Source tolerance classification 1.33 Figure B.2 Source tolerance classification 2.34 Figure B.3 Source tolerance classification 3.34 Figure B.4 Source tolerance classification 4.34 Figure C.1 Continuous STS neutral with common grounding of a.c. input sources (complying l

33、oad current flow) 35 Figure C.2 Continuous STS neutral with independent grounding of a.c. input sources + isolation transformer (complying load current flow) 36 Figure C.3 Switched STS with independent grounding of a.c. input sources (complying steady state load current flow) 36 Figure D.1 Load volt

34、age variation upon neutral switch failure.37 Figure D.2 Overlapping switched STS neutral 38 Figure F.1 Test circuit for STS output withstand current.45 Table 1 Transfer interruption classification “T” .13 Table 2 Tests for STS performance characteristics 17 Table 3 Short time withstand current22 Tab

35、le 4 Free fall testing .27 Table E.1 STS technical data sheet .41 Table F.1 Values of power-factors and time-constants corresponding to test currents and ratio n between peak and r.m.s. values of current 44 Table H.1 Minimum and maximum cross-sections of copper conductors suitable for connection (ex

36、tract from IEC 60439-1)48 BS EN 62310-3:2008Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/08/2009 03:55, Uncontrolled Copy, (c) BSI 6 62310-3 IEC:2008 STATIC TRANSFER SYSTEMS (STS) Part 3: Method for specifying performance and test requirements 1 Scope The IEC 62310 series of three stand

37、ards applies to stand-alone operating a.c. static transfer systems (STS) intended to ensure the continuity of load supply through controlled transfer, with or without interruption of power, from two or more independent a.c. sources. This series of standards includes information for the overall integ

38、ration of the STS and its accessories into the a.c. power network and includes requirements for the switching elements, their control and protective elements, where applicable. Part 1 of the series concerns general and safety requirements. Part 2 of the series concerns electromagnetic compatibility

39、(EMC) requirements. This Part 3 of the series concerns methods for specifying performance and test requirements including applicable safety tests referenced in standard IEC 62310-1 for general and safety requirements. This standard applies for single-phase, phase-phase and three-phase static transfe

40、rs in a. c. systems up to 1 000 V. It takes precedence over all aspects of generic performance standards, and no additional performance testing is necessary. The requirements have been selected so as to be consistent with compatibility levels for low-frequency conducted disturbances and signalling i

41、n public low-voltage power supply systems (see IEC 61000-2-2) as well as to ensure an adequate level of performance when the STS is applied in diverse critical load situations. The requirements take into account the differing test conditions necessary to encompass the range of physical sizes and pow

42、er ratings of STS. This standard applies to STS as a stand-alone product, whether presented as a unit or an assembly of units. This standard does not apply to: devices for d.c. source switching; single source systems; transfer systems using only electromechanical switching devices with interruption

43、of the supply to the load during transfer and intended to be used in emergency power systems or covered by IEC 60947-6-1; automatic switching devices integrated into UPS covered by the IEC 62040 series of UPS product standards. NOTE Additional or different requirements may apply to STS intended for

44、use on board of vehicles including ships and aircrafts, in emergency power systems subject to a particular regulation e.g. health care facilities, fire fighting or emergency rescue, in tropical countries or where elevations are greater than 1 000 m. 2 Normative references The following referenced do

45、cuments are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068 (all parts), Environmental testing BS EN 62310-3:2008Licensed Copy

46、: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 11/08/2009 03:55, Uncontrolled Copy, (c) BSI62310-3 IEC:2008 7 IEC 60146-1-1, Semiconductor convertors General requirements and line commutated convertors Part 1-1: Specifications of basic requirements IEC 60439-1, Low-voltage switchgear and controlgear asse

47、mblies Part 1: Type-tested and partially type-tested assemblies IEC 60529, Degrees of protection provided by enclosures (IP Code) IEC 60947-6-1, Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment Transfer switching equipment IEC 60950-1, Information technology equipment Saf

48、ety Part 1: General requirements IEC 61000-2-2, Electromagnetic compatibility (EMC) Part 2-2: Environment Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems IEC 62040-3, Uninterruptible power systems (UPS) Part 3: Method of specify

49、ing the performance and test requirements IEC 62310-1, Static Transfer Systems (STS) Part 1: General and safety requirements IEC 62310-2, Static Transfer Systems (STS) Part 2: Electromagnetic Compatibility (EMC) requirements ISO 7779, Measurement of airbone noise emitted by information technology and telecommunications equipment 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3