BS EN 62275-2015 Cable management systems Cable ties for electrical installations《电缆管理系统 电气设备用电缆接头》.pdf
《BS EN 62275-2015 Cable management systems Cable ties for electrical installations《电缆管理系统 电气设备用电缆接头》.pdf》由会员分享,可在线阅读,更多相关《BS EN 62275-2015 Cable management systems Cable ties for electrical installations《电缆管理系统 电气设备用电缆接头》.pdf(36页珍藏版)》请在麦多课文档分享上搜索。
1、BSI Standards PublicationCable management systems Cable ties for electrical installationsBS EN 62275:2015BS EN 62275:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 62275:2015. It is derived from IEC 62275:2013. It supersedes BS EN 62275:2009 which is withd
2、rawn.The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is indicated in the text by tags . The UK participation in its preparation was entrusted to Technical Committee PEL/213, Cable management.A list of orga
3、nizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2
4、015ISBN 978 0 580 76814 9ICS 29.120.10; 29.120.99Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2015.Amendments/corrigenda issued since publicationDate
5、 Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62275 February 2015 ICS 29.120.10; 29.120.99 Supersedes EN 62275:2009 English Version Cable management systems - Cable ties for electrical installations (IEC 62275:2013 , modified) Systmes de cblage - Colliers pour installations lect
6、riques (IEC 62275:2013 , modifie) Kabelfhrungssysteme - Kabelbinder fr elektrische Installationen (IEC 62275:2013 , modifiziert) This European Standard was approved by CENELEC on 2015-01-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions
7、for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists i
8、n three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national
9、 electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portuga
10、l, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000
11、Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62275:2015 E BS EN 62275:2015EN 62275:2015 - 2 - Foreword This document (EN 62275:2015) consists of the text of IEC 62275:2013 prepared by SC 23A “Cable management system
12、s” of IEC/TC 23 “Electrical accessories“, together with the common modifications prepared by CLC/TC 213 “Cable management systems“. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsem
13、ent (dop) 2016-01-19 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-01-19 This document supersedes EN 62275:2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC a
14、nd/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Sta
15、ndard IEC 62275:2013 was approved by CENELEC as a European Standard with agreed common modifications. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 62275:2006 NOTE Harmonized as EN 62275:2009 (modified). COMMON MODIFICATIONS Annex A Rep
16、lace Annex A by: BS EN 62275:2015EN 62275:2015 - 4 - Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicat
17、ion. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOT
18、E 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60068-2-6 2007 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 2008 IEC 60695-11-5 2004 Fire
19、 hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 2005 IEC 60216-4-1 2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens EN 60216-4-1 2006 ISO 4892-
20、2 2006 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps EN ISO 4892-2 2006 ISO 9227 2012 Corrosion tests in artificial atmospheres - Salt spray tests EN ISO 9227 2012 BS EN 62275:2015 2 BS EN 62275:2015EN 62275:2015EN 62275:2015 - 2 - Foreword This document (EN 62
21、275:2015) consists of the text of IEC 62275:2013 prepared by SC 23A “Cable management systems” of IEC/TC 23 “Electrical accessories“, together with the common modifications prepared by CLC/TC 213 “Cable management systems“. The following dates are fixed: latest date by which the document has to be i
22、mplemented at national level by publication of an identical national standard or by endorsement (dop) 2016-01-19 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-01-19 This document supersedes EN 62275:2009. Attention is drawn to the possibili
23、ty that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Cer
24、tain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 62275:2013 was approved by CENELEC as a European Standard with agreed common modifications. In the official version, for Bibliography, the following note has to be added for the standard indicated:
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSEN622752015CABLEMANAGEMENTSYSTEMSCABLETIESFORELECTRICALINSTALLATIONS 电缆 管理 系统 电气 备用 接头 PDF
链接地址:http://www.mydoc123.com/p-578292.html