BS EN 62271-101-2013 High-voltage switchgear and controlgear Synthetic testing《高压开关装置和控制装置 综合性测试》.pdf
《BS EN 62271-101-2013 High-voltage switchgear and controlgear Synthetic testing《高压开关装置和控制装置 综合性测试》.pdf》由会员分享,可在线阅读,更多相关《BS EN 62271-101-2013 High-voltage switchgear and controlgear Synthetic testing《高压开关装置和控制装置 综合性测试》.pdf(167页珍藏版)》请在麦多课文档分享上搜索。
1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHigh-voltage switchgear and controlgearPart 101: Synthetic testingBS EN 62271-101:2013National forewordThis British Standard is the UK implementation of EN 62271-101:2013. It is
2、identical to IEC 62271-101:2012. It supersedes BS EN 62271-101:2006+A1:2010 which is withdrawn.The UK participation in its preparation was entrusted by Technical Committee PEL/17, Switchgear, controlgear, and HV-LV co-ordination, to Subcommittee PEL/17/1, High-voltage switchgear and controlgear.A li
3、st of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013Published by BSI Standards L
4、imited 2013 ISBN 978 0 580 71087 2 ICS 29.130.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2013.Amendments issued since publicationDate Text affect
5、edBRITISH STANDARDBS EN 62271-101:2013EUROPEAN STANDARD EN 62271-101 NORME EUROPENNE EUROPISCHE NORM January 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue
6、 Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62271-101:2013 E ICS 29.130.10 Supersedes EN 62271-101:2006 + A1:2010 English version High-voltage switchgear and controlgear - Part 101: Synthetic
7、 testing (IEC 62271-101:2012) Appareillage haute tension - Partie 101: Essais synthtiques (CEI 62271-101:2012) Hochspannungs-Schaltgerte und -Schaltanlagen - Teil 101: Synthetische Prfung (IEC 62271-101:2012) This European Standard was approved by CENELEC on 2012-11-16. CENELEC members are bound to
8、comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CEN
9、ELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centr
10、e has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy
11、, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62271-101:2013EN 62271-101:2013 - 2 - Foreword The text of document 17A/1015/FDIS, future edition 2 of IEC 62271-101, prepa
12、red by SC 17A, “High-voltage switchgear and controlgear“, of IEC TC 17, “Switchgear and controlgear“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62271-101:2013. The following dates are fixed: latest date by which the document has to be implemented at national level b
13、y publication of an identical national standard or by endorsement (dop) 2013-08-16 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-11-16 This document supersedes EN 62271-101:2006 + A1:2010. EN 62271-101:2013 includes the following significan
14、t technical changes with respect to EN 62271-101:2006: addition of the new rated voltages of 1 100 kV and 1 200 kV; revision of Annex F regarding circuit-breakers with opening resistors; alignment with the EN 62271-100:2009 + A1: 2012. This publication shall be read in conjunction with EN 62271-100:
15、2009, to which it refers. The numbering of the subclauses of Clause 6 is the same as in EN 62271-100. However, not all subclauses of EN 62271-100 are addressed; merely those where synthetic testing has introduced changes. Attention is drawn to the possibility that some of the elements of this docume
16、nt may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62271-101:2012 was approved by CENELEC as a European Standard without any modification. BS EN 62271-10
17、1:2013- 3 - EN 62271-101:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated referenc
18、es, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD
19、 Year IEC 62271-100 + A1 2008 2012 High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers EN 62271-100 + A1 2009 2012 BS EN 62271-101:2013 2 62271-101 IEC:2012 CONTENTS 1 Scope . 9 2 Normative references . 9 3 Terms and definitions . 9 4 Synthetic testing techniques
20、 and methods for short-circuit breaking tests . 11 Basic principles and general requirements for synthetic breaking test 4.1methods 11 General . 11 4.1.1High-current interval 12 4.1.2Interaction interval . 12 4.1.3High-voltage interval 13 4.1.4Synthetic test circuits and related specific requirement
21、s for breaking tests 14 4.2Current injection methods 14 4.2.1Voltage injection method . 15 4.2.2Duplicate circuit method (transformer or Skeats circuit) . 15 4.2.3Other synthetic test methods . 16 4.2.4Three-phase synthetic test methods 16 4.35 Synthetic testing techniques and methods for short-circ
22、uit making tests . 19 Basic principles and general requirements for synthetic making test methods . 19 5.1General . 19 5.1.1High-voltage interval 19 5.1.2Pre-arcing interval . 19 5.1.3Latching interval and fully closed position 20 5.1.4Synthetic test circuit and related specific requirements for mak
23、ing tests 20 5.2General . 20 5.2.1Test circuit 20 5.2.2Specific requirements 20 5.2.36 Specific requirements for synthetic tests for making and breaking performance related to the requirements of 6.102 through 6.111 of IEC 62271-100:2008 . 21 Annex A (informative) Current distortion 42 Annex B (info
24、rmative) Current injection methods 58 Annex C (informative) Voltage injection methods . 62 Annex D (informative) Skeats or duplicate transformer circuit 65 Annex E (normative) Information to be given and results to be recorded for synthetic tests . 68 Annex F (normative) Synthetic test methods for c
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSEN622711012013HIGHVOLTAGESWITCHGEARANDCONTROLGEARSYNTHETICTESTING 高压 开关 装置 控制 综合性 测试 PDF
链接地址:http://www.mydoc123.com/p-578268.html