BS EN 62056-8-6-2017 Electricity metering data exchange The DLMS COSEM suite High speed PLC ISO IEC 12139-1 profile for neighbourhood networks《电力计量数据交换 DLMS COSEM套件 邻域网用高速PLC ISO I.pdf

《BS EN 62056-8-6-2017 Electricity metering data exchange The DLMS COSEM suite High speed PLC ISO IEC 12139-1 profile for neighbourhood networks《电力计量数据交换 DLMS COSEM套件 邻域网用高速PLC ISO I.pdf》由会员分享，可在线阅读，更多相关《BS EN 62056-8-6-2017 Electricity metering data exchange The DLMS COSEM suite High speed PLC ISO IEC 12139-1 profile for neighbourhood networks《电力计量数据交换 DLMS COSEM套件 邻域网用高速PLC ISO I.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、Electricity metering data exchange The DLMS/COSEM suitePart 8-6: High speed PLC ISO/IEC 12139-1 profile for neighbourhood networksBS EN 62056-8-6:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62056-8-6 June 2

2、017 ICS 17.220; 35.110; 91.140.50 English Version Electricity metering data exchange - The DLMS/COSEM suite - Part 8-6: High speed PLC ISO/IEC 12139-1 profile for neighbourhood networks (IEC 62056-8-6:2017) change des donnes de comptage de llectricit - La suite DLMS/COSEM - Partie 8-6: Profil CPL IS

3、O/IEC 12139-1 grande vitesse pour les rseaux de voisinage (IEC 62056-8-6:2017) Datenkommunikation der elektrischen Energiemessung - DLMS/COSEM - Teil 8-6: Schnelles PLC-ISO/IC-12139-1-Profil fr Areal-Netze (IEC 62056-8-6:2017) This European Standard was approved by CENELEC on 2017-05-15. CENELEC mem

4、bers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicat

5、ion to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELE

6、C Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icela

7、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique

8、 Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62056-8-6:2017 E National forewordThis British Standard is the U

9、K implementation of EN 62056-8-6:2017. It is identical to IEC 62056-8-6:2017.The UK participation in its preparation was entrusted to Technical Committee PEL/13, Electricity Meters.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does

10、 not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 85140 7ICS 17.220.01; 17.220.20; 91.140.50; 35.110Compliance with a British Standard can

11、not confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62056-8-6:2017EUROPEAN STANDARD NORME EUROPENNE EUR

12、OPISCHE NORM EN 62056-8-6 June 2017 ICS 17.220; 35.110; 91.140.50 English Version Electricity metering data exchange - The DLMS/COSEM suite - Part 8-6: High speed PLC ISO/IEC 12139-1 profile for neighbourhood networks (IEC 62056-8-6:2017) change des donnes de comptage de llectricit - La suite DLMS/C

13、OSEM - Partie 8-6: Profil CPL ISO/IEC 12139-1 grande vitesse pour les rseaux de voisinage (IEC 62056-8-6:2017) Datenkommunikation der elektrischen Energiemessung - DLMS/COSEM - Teil 8-6: Schnelles PLC-ISO/IC-12139-1-Profil fr Areal-Netze (IEC 62056-8-6:2017) This European Standard was approved by CE

14、NELEC on 2017-05-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stand

15、ards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own languag

16、e and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,

17、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen d

18、e Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62056-8-6:2017 E BS EN 62056-8-6

19、:2017EN 62056-8-6:2017 2 European foreword The text of document 13/1730/FDIS, future edition 1 of IEC 62056-8-6, prepared by IEC/TC 13 “Electrical energy measurement and control“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62056-8-6:2017. The following dates are fixe

20、d: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-02-15 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-05-15 Attention is drawn to the p

21、ossibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Asso

22、ciation. Endorsement notice The text of the International Standard IEC 62056-8-6:2017 was approved by CENELEC as a European Standard without any modification. BS EN 62056-8-6:2017EN 62056-8-6:2017 2 European foreword The text of document 13/1730/FDIS, future edition 1 of IEC 62056-8-6, prepared by I

23、EC/TC 13 “Electrical energy measurement and control“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62056-8-6:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard

24、or by endorsement (dop) 2018-02-15 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-05-15 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsib

25、le for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association. Endorsement notice The text of the International Standard IEC 62056-8-6:2017 was approved by CENELEC as a European St

26、andard without any modification. EN 62056-8-6:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicat

27、ion. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOT

28、E 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 62056-1-0 2014 Electricity metering data exchange - The DLMS/COSEM suite - Part 1-0: Smart metering standardisation framework EN 6

29、2056-1-0 2015 IEC 62056-4-7 - Electricity metering data exchange - The DLMS/COSEM suite - Part 4-7: DLMS/COSEM transport layer for IP networks EN 62056-4-7 - IEC 62056-5-3 - Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer EN 62056-5-3 - IEC 62056-6-

30、1 - Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) EN 62056-6-1 - IEC 62056-6-2 2016 Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes EN 62056-6-2 2016 IEC 62056-7-6 - Electricity metering data ex

31、change - The DLMS/COSEM suite - Part 7-6: The 3-layer, connection-oriented HDLC based communication profile EN 62056-7-6 - IEC 62056-9-7 - Electricity metering data exchange - The DLMS/COSEM suite - Part 9-7: Communication profile for TCP-UDP/IP networks EN 62056-9-7 - IEC 62056-46 - Electricity met

32、ering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol EN 62056-46 - IEC/TS 62056-1-1 2016 Electricity metering data exchange - The DLMS/COSEM suite - Part 1-1: Template for DLMS/COSEM communication profile standards - - ISO/IEC 12139-1 2009 I

33、nformation technology - Telecommunications and information exchange between systems - Powerline communication (PLC) - High speed PLC medium access control (MAC) and physical layer (PHY) - Part 1: General requirements - - ISO/IEC/IEEE 8802-3 2014 Standard for Ethernet - - RFC 1144 - Compressing TCP/I

34、P Headers for Low-Speed Serial Links - - RFC 2460 - Internet Protocol, Version 6 (IPv6) Specification - - RFC 2508 - Compressing IP/UDP/RTP Headers for Low-Speed Serial Links - - BS EN 62056-8-6:2017EN 62056-8-6:2017 4 RFC 3095 - RObust Header Compression (ROHC): Framework and four profiles: RTP, UD

35、P, ESP, and uncompressed - - RFC 791 - Internet Protocol - DARPA Internet Program Protocol Specification - - 2 IEC 62056-8-6:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviated terms 8 3.1 Terms and definitions 8 3.2 Abbreviate

36、d terms . 8 4 Targeted communication environments 9 5 Use of the communication layers for this profile . 10 5.1 Information related to the use of the standard specifying the lower layers . 10 5.2 Structure of the communication profile 10 5.3 Lower protocol layers and their use. 11 5.3.1 Overview . 1

37、1 5.3.2 Physical layer 11 5.3.3 MAC layer 11 5.4 Service mapping and adaptation layers . 11 5.4.1 Overview . 11 5.4.2 CPAS 12 5.4.3 IP SSAS 12 5.4.4 HDLC SSAS 16 5.5 Registration and connection management . 19 6 Identification and addressing schemes 19 7 Specific considerations for the application l

38、ayer services . 20 7.1 Overview. 20 7.2 Application Association establishment and release: ACSE services 20 7.3 xDLMS services 20 7.4 Security mechanisms 21 7.5 Transferring long application messages 21 7.6 Media access, bandwidth and timing considerations . 21 7.7 Other considerations . 21 8 Commun

39、ication configuration and management . 21 9 The COSEM application process . 21 10 Additional considerations for the use of this profile 21 Annex A (informative) Examples 22 A.1 IP-based communication examples . 22 A.2 HDLC-based communication examples . 25 A.2.1 Example 1: Data link layer connection

40、 establishment (SNRM-UA exchange) 25 A.2.2 Example 2: Establishment of an AA (AARQ AARE exchange) . 26 A.2.3 Example 3: Data communication (Get-request) 28 A.2.4 Example 4: Disconnection example with Releasing (DISC) 30 Annex B (normative) COSEM ICs for data exchange using HS-PLC ISO/IEC 12139-1 nei

41、ghbourhood networks . 32 B.1 General . 32 B.2 Interface classes for setting up and managing DLMS/COSEM HS-PLC ISO/IEC 12139-1 networks 32 BS EN 62056-8-6:2017EN 62056-8-6:2017 4 RFC 3095 - RObust Header Compression (ROHC): Framework and four profiles: RTP, UDP, ESP, and uncompressed - - RFC 791 - In

42、ternet Protocol - DARPA Internet Program Protocol Specification - - 2 IEC 62056-8-6:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviated terms 8 3.1 Terms and definitions 8 3.2 Abbreviated terms . 8 4 Targeted communication envi

43、ronments 9 5 Use of the communication layers for this profile . 10 5.1 Information related to the use of the standard specifying the lower layers . 10 5.2 Structure of the communication profile 10 5.3 Lower protocol layers and their use. 11 5.3.1 Overview . 11 5.3.2 Physical layer 11 5.3.3 MAC layer

44、 11 5.4 Service mapping and adaptation layers . 11 5.4.1 Overview . 11 5.4.2 CPAS 12 5.4.3 IP SSAS 12 5.4.4 HDLC SSAS 16 5.5 Registration and connection management . 19 6 Identification and addressing schemes 19 7 Specific considerations for the application layer services . 20 7.1 Overview. 20 7.2 A

45、pplication Association establishment and release: ACSE services 20 7.3 xDLMS services 20 7.4 Security mechanisms 21 7.5 Transferring long application messages 21 7.6 Media access, bandwidth and timing considerations . 21 7.7 Other considerations . 21 8 Communication configuration and management . 21

46、 9 The COSEM application process . 21 10 Additional considerations for the use of this profile 21 Annex A (informative) Examples 22 A.1 IP-based communication examples . 22 A.2 HDLC-based communication examples . 25 A.2.1 Example 1: Data link layer connection establishment (SNRM-UA exchange) 25 A.2.

47、2 Example 2: Establishment of an AA (AARQ AARE exchange) . 26 A.2.3 Example 3: Data communication (Get-request) 28 A.2.4 Example 4: Disconnection example with Releasing (DISC) 30 Annex B (normative) COSEM ICs for data exchange using HS-PLC ISO/IEC 12139-1 neighbourhood networks . 32 B.1 General . 32

48、 B.2 Interface classes for setting up and managing DLMS/COSEM HS-PLC ISO/IEC 12139-1 networks 32 BS EN 62056-8-6:2017IEC 62056-8-6:2017 IEC 2017 3 B.2.1 Overview . 32 B.2.2 HS-PLC ISO/IEC 12139-1 MAC setup (class_id = 140, version = 0) . 32 B.2.3 HS-PLC ISO/IEC 12139-1 CPAS setup (class_id = 141, ve

49、rsion = 0) . 33 B.2.4 HS-PLC ISO/IEC 12139-1 IP SSAS setup (class_id = 142, version = 0) . 34 B.2.5 HS-PLC ISO/IEC 12139-1 HDLC SSAS setup (class_id = 143, version = 0). 35 B.3 Relation to OBIS . 35 B.3.1 Use of value group C . 35 B.3.2 Objects for data exchange using DLMS/COSEM HS-PLC ISO/IEC 12139-1 networks 36 Index 37 Figure 1 Entities and interfaces of a smart metering system using the terminology of IEC 62056-1-0 9 Figure 2 DLMS/COSEM High Speed PLC profile 10 Figure 3 Adaptation