BS EN 62056-6-1-2013 Electricity metering data exchange The DLMS COSEM suite Object Identification System (OBIS)《电能测量数据交换 DLMS COSEM程序组 对象标识系统 (OBIS)》.pdf

《BS EN 62056-6-1-2013 Electricity metering data exchange The DLMS COSEM suite Object Identification System (OBIS)《电能测量数据交换 DLMS COSEM程序组 对象标识系统 (OBIS)》.pdf》由会员分享，可在线阅读，更多相关《BS EN 62056-6-1-2013 Electricity metering data exchange The DLMS COSEM suite Object Identification System (OBIS)《电能测量数据交换 DLMS COSEM程序组 对象标识系统 (OBIS)》.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationElectricity metering data exchange TheDLMS/COSEM suitePart 6-1: Object Identification System (OBIS)BS EN 62056-6-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking perm

2、itted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 62056-6-1:2013. It isidentical to IEC 62056-6-1:2013. It supersedes BS EN 62056-61:2007 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/13, Elect

3、ricity Meters.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2013.Published b

4、y BSI Standards Limited 2013ISBN 978 0 580 73949 1ICS 17.220.01; 35.110; 91.140.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2013.Amendments/corr

5、igenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62056-6-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 620

6、56-6-1 NORME EUROPENNE EUROPISCHE NORM August 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All ri

7、ghts of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62056-6-1:2013 E ICS 17.220; 35.110; 91.140.50 Supersedes EN 62056-61:2007 English version Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) (

8、IEC 62056-6-1:2013) Echange des donnes de comptage de llectricit - La suite DLMS/COSEM - Partie 6-1: Systme didentification des objets (OBIS) (CEI 62056-6-1:2013) Datenkommunikation der elektrischen Energiemessung - DLMS/COSEM - Teil 6-1: COSEM Object Identification System (OBIS) (IEC 62056-6-1:2013

9、) This European Standard was approved by CENELEC on 2013-07-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographica

10、l references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibili

11、ty of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, For

12、mer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62056-6-1:2013Copyright Europe

13、an Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 62056-6-1:2013 - 2 - Foreword The text of document 13/1524/FDIS, future edition 1 of IEC 62056-6-1, prepared by IEC/TC 13

14、“Electrical energy measurement, tariff- and load control“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62056-6-1:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national stan

15、dard or by endorsement (dop) 2014-04-04 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-07-04 EN 62056-6-1:2013 cancels and replaces EN 62056-61 published in 2007. It constitutes a technical revision. The significant technical changes with re

16、spect to EN 62056-61 are listed in Annex B. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the Interna

17、tional Standard IEC 62056-6-1:2013 was approved by CENELEC as a European Standard without any modification. BS EN 62056-6-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without li

18、cense from IHS-,-,- 3 - EN 62056-6-1:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For da

19、ted references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year

20、 Title EN/HD Year IEC/TR 62051 1999 Electricity metering - Glossary of terms - - IEC/TR 62051-1 + corr. June 2004 2005 Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM

21、 - - IEC 62053-23 2003 Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) EN 62053-23 2003 IEC 62056-6-2 2013 Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes EN 62056-6-2 2013 IE

22、C 62056-21 2002 Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange EN 62056-21 2002 BS EN 62056-6-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo repr

23、oduction or networking permitted without license from IHS-,-,- 2 62056-6-1 IEC:2013 CONTENTS INTRODUCTION . 7 1 Scope . 8 2 Normative references . 8 3 Terms, definitions and abbreviations 9 4 OBIS code structure . 9 General . 9 4.1Value group A . 9 4.2Value group B . 9 4.3Value group C . 10 4.4Value

24、 group D . 10 4.5Value group E . 10 4.6Value group F 10 4.7Manufacturer specific codes 10 4.8Reserved ranges . 10 4.9Summary of rules for manufacturer, utility, consortia and country specific 4.10codes 11 Standard object codes . 11 4.115 Value group definitions common to all media 12 Value group A .

25、 12 5.1Value group B . 12 5.2Value group C . 12 5.3General . 12 5.3.1Abstract objects . 13 5.3.2Value group D . 13 5.4General . 13 5.4.1Consortia specific identifiers 13 5.4.2Country specific identifiers. 14 5.4.3Identification of abstract objects 15 5.4.4Value group E . 15 5.5Value group F 15 5.6Ge

26、neral . 15 5.6.1Identification of billing periods . 16 5.6.26 Abstract objects (A = 0) 16 Abstract objects, general service entries . 16 6.1Error registers, alarm registers and alarm filters Abstract . 19 6.2List objects Abstract . 19 6.3Register table objects Abstract . 19 6.4Data profile objects A

27、bstract . 20 6.57 Electricity (A = 1) 20 Value group C codes Electricity 20 7.1Value group D codes Electricity 22 7.2Processing of measurement values . 22 7.2.1Use of value group D for identification of other objects 25 7.2.2Value group E codes Electricity 25 7.3General . 25 7.3.1BS EN 62056-6-1:201

28、3Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-62056-6-1 IEC:2013 3 Tariff rates . 25 7.3.2Harmonics . 25 7.3.3Phase angles . 26 7.3.4Transformer and line

29、loss quantities 26 7.3.5UNIPEDE voltage dips . 29 7.3.6Use of value group E for the identification of other objects 30 7.3.7Value group F codes Electricity 30 7.4Billing periods 30 7.4.1Multiple thresholds 30 7.4.2OBIS codes Electricity 30 7.5General purpose objects Electricity . 30 7.5.1Error regis

30、ter objects Electricity 33 7.5.2List objects Electricity . 34 7.5.3Data profile objects Electricity 34 7.5.4Register table objects Electricity . 34 7.5.5Annex A (normative) Code presentation . 36 Annex B (informative) Significant technical changes with respect to IEC 62056-61 39 Bibliography 41 Inde

31、x 42 Figure 1 OBIS code structure 9 Figure 2 Quadrant definitions for active and reactive power . 22 Figure 3 Model of the line and the transformer for calculation of loss quantities 27 Figure A.1 Reduced ID code presentation 36 Table 1 Rules for manufacturer, utility, consortia and country specific

32、 codes . 11 Table 2 Value group A codes . 12 Table 3 Value group B codes . 12 Table 4 Value group C codes Abstract objects 13 Table 5 Value group D codes Consortia specific identifiers . 13 Table 6 Value group D codes Country specific identifiers 14 Table 7 OBIS codes for abstract objects, general s

33、ervice entries . 16 Table 8 OBIS codes for error registers, alarm registers and alarm filters Abstract . 19 Table 9 OBIS codes for list objects Abstract . 19 Table 10 OBIS codes for Register table objects Abstract 19 Table 11 OBIS codes for data profile objects Abstract . 20 Table 12 Value group C c

34、odes Electricity 20 Table 13 Value group D codes Electricity 22 Table 14 Value group E codes Electricity Tariff rates . 25 Table 15 Value group E codes Electricity Harmonics 25 Table 16 Value group E codes Electricity Extended phase angle measurement . 26 Table 17 Value group E codes Electricity Tra

35、nsformer and line losses . 27 Table 18 Value group E codes Electricity UNIPEDE voltage dips . 29 Table 19 OBIS codes for general purpose objects Electricity . 30 Table 20 OBIS codes for error register objects Electricity . 34 BS EN 62056-6-1:2013Copyright European Committee for Electrotechnical Stan

36、dardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 4 62056-6-1 IEC:2013 Table 21 OBIS codes for list objects Electricity . 34 Table 22 OBIS codes for data profile objects Electricity 34 Table 23 OBIS codes for Reg

37、ister table objects Electricity 35 Table A.1 Example of display code replacement 36 Table A.2 Value group F Billing periods 37 BS EN 62056-6-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking p

38、ermitted without license from IHS-,-,-62056-6-1 IEC:2013 7 INTRODUCTION The competitive electricity market requires an ever-increasing amount of timely information concerning the usage of electrical energy. Recent technology developments enable to build intelligent static metering equipment, which i

39、s capable of capturing, processing and communicating this information to all parties involved. To facilitate the analysis of metering information, for the purposes of billing, load-, customer- and contract management, it is necessary to uniquely identify data items, whether collected manually or aut

40、omatically, via local or remote data exchange, in a manufacturer-independent way. The definition of identification codes to achieve this the OBIS codes is based on DIN 43863-3:1997, Electricity meters Part 3: Tariff metering device as additional equipment for electricity meters EDIS Energy Data Iden

41、tification System. BS EN 62056-6-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 8 62056-6-1 IEC:2013 ELECTRICITY METERING DATA EXCHANGE THE DLMS/COSE

42、M SUITE Part 6-1: Object Identification System (OBIS) 1 Scope This part of IEC 62056 specifies the overall structure of the OBject Identification System (OBIS) and the mapping of all commonly used data items in metering equipment to their identification codes. OBIS provides a unique identifier for a

43、ll data within the metering equipment, including not only measurement values, but also abstract values used for configuration or obtaining information about the behaviour of the metering equipment. The ID codes defined in this standard are used for the identification of: logical names of the various

44、 instances of the ICs, or objects, as defined in IEC 62056-6-22; data transmitted through communication lines, data displayed on the metering equipment, see A.2. This standard applies to all types of metering equipment, such as fully integrated meters, modular meters, tariff attachments, data concen

45、trators etc. To cover metering equipment measuring energy types other than electricity, combined metering equipment measuring more than one type of energy or metering equipment with several physical measurement channels, the concepts of medium and channels are introduced. This allows meter data orig

46、inating from different sources to be identified. While this standard fully defines the structure of the identification system for other media, the mapping of non-electrical energy related data items to ID codes needs to be completed separately. NOTE EN 13757-1 defines identifiers for metering equipm

47、ent other than electricity: heat cost allocators, cooling, heating, gas, cold water and hot water. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited

48、applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC/TR 62051:1999, Electricity metering Glossary of terms IEC/TR 62051-1:2004, Electricity metering Data exchange for meter reading, tariff and load control Glossary of terms Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM IEC 62053-23:2003, Electricity metering equ