BS EN 61987-24-1-2016 Industrial-process measurement and control Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of positioners and I P conv.pdf

《BS EN 61987-24-1-2016 Industrial-process measurement and control Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of positioners and I P conv.pdf》由会员分享，可在线阅读，更多相关《BS EN 61987-24-1-2016 Industrial-process measurement and control Data structures and elements in process equipment catalogues Lists of Properties (LOPs) of positioners and I P conv.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationIndustrial-process measurementand control Data structures and elements in process equipment catalogues Part 24-1: Lists of Properties (LOPs) of positioners and I/P converters for electronic data exchangeBS EN 61987-24-1:2016National forewordThis British Standard is the UK im

2、plementation of EN 61987-24-1:2016. It isidentical to IEC 61987-24-1:2015.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/65, Measurement and control, to Subcommittee GEL/65/2,Elements of systems.A list of organizations represented on this committee can be obtained on

3、request to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 83873 6ICS 01.110; 25.040.40; 35.240.50Comp

4、liance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 29 February 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61987-24-1:2016E

5、UROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61987-24-1 January 2016 ICS 01.110; 25.040.40; 35.240.50 English Version Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-1: Lists of Properties (LOPs) of positioners and I/P conver

6、ters for electronic data exchange (IEC 61987-24-1:2015) Mesure et commande dans les processus industriels - Structures de donnes et lments dans les catalogues dquipement de processus - Partie 24-1: Listes de proprits (LOP) des positionneurs et des convertisseurs I/P pour lchange lectronique de donne

7、s (IEC 61987-24-1:2015) Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 24-1: Merkmalleisten (ML) fr Stellungsregler fr den elektronischen Datenaustausch (IEC 61987-24-1:2015) This European Standard was approved by CENELEC on 2015-10-20. CENELEC me

8、mbers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applica

9、tion to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENEL

10、EC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icel

11、and, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europi

12、sches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61987-24-1:2016 E BS EN 61987-24-1:2016EN 61987-24-1:2016 2 European fo

13、reword The text of document 65B/999/FDIS, future edition 1 of IEC 61987-24-1, prepared by SC 65B “Measurement and control devices“, of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61987-24-1:2016. The

14、following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-07-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-10-20 Att

15、ention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61987-24-1:2015 was approve

16、d by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60534-7 NOTE Harmonized as EN 60534-7. IEC 61360-1 NOTE Harmonized as EN 61360-1. IEC 61360-2 NOTE Harmonized as EN 61360-2.

17、IEC 61360-5 NOTE Harmonized as EN 61360-5. IEC 61514 NOTE Harmonized as EN 61514. IEC 61514-2 NOTE Harmonized as EN 61514-2. IEC 61987-1 NOTE Harmonized as EN 61987-1. IEC 61987-21:2015 NOTE Harmonized as EN 61987-21:2016 (not modified). BS EN 61987-24-1:2016EN 61987-24-1:2016 3 Annex ZA (normative)

18、 Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated re

19、ferences, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standar

20、ds listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61987-10 2009 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 10: Lists of Properties (LOPs) for Industrial-Process Measurement and Contro

21、l for Electronic Data Exchange - Fundamentals EN 61987-10 2009 IEC 61987-11 - Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11: List of Properties (LOP) of measuring equipment for electronic data exchange - Generic structures EN 6198

22、7-11 - IEC 61987-21 2015 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures EN 61987-21 2016 BS EN 61987-24-1:2016 2 IEC 61987-24-1:2015 IE

23、C 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 General . 7 4.1 Overview. 7 4.2 Depiction of OLOP and DLOPs . 7 (normative) Operating List of Properties (OLOP) for valve/actuator Annex Aaccessories 8 (normative) Device Lists of Properties

24、(DLOPs) for positioners and I/P Annex Bconverters . 9 B.1 Device LOP for positioner . 9 B.2 Device LOP for I/P converter. 9 (normative) Property library . 10 Annex C(normative) Block library for considered device types 11 Annex DBibliography 12 BS EN 61987-24-1:2016IEC 61987-24-1:2015 IEC 2015 3 INT

25、ERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES Part 24-1: Lists of Properties (LOPs) of positioners and I/P converters for electronic data exchange FOREWORD 1) The International Electrotechnical Commiss

26、ion (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in

27、addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee int

28、erested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance

29、with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all intereste

30、d IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible

31、for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence betwe

32、en any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of con

33、formity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and mem

34、bers of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication

35、or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication

36、may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61987-24-1 has been prepared by subcommittee 65B: Measurement and control devices, of IEC technical committee 65: Industrial-process measurement, control a

37、nd automation. The text of this standard is based on the following documents: FDIS Report on voting 65B/999/FDIS 65B/1020/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accor

38、dance with the ISO/IEC Directives, Part 2. BS EN 61987-24-1:2016 4 IEC 61987-24-1:2015 IEC 2015 A list of all parts in the IEC 61987 series, published under the general title Industrial-process measurement and control Data structures and elements in process equipment catalogues, can be found on the

39、IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replac

40、ed by a revised edition, or amended. BS EN 61987-24-1:2016IEC 61987-24-1:2015 IEC 2015 5 INTRODUCTION The exchange of product data between companies, business systems, engineering tools, data systems within companies and, in the future, control systems (electrical, measuring and control technology)

41、can run smoothly only when both the information to be exchanged and the use of this information have been clearly defined. Prior to this standard, requirements on process control devices and systems were specified by customers in various ways when suppliers or manufacturers were asked to quote for s

42、uitable equipment. The suppliers in their turn described the devices according to their own documentation schemes, often using different terms, structures and media (paper, databases, CDs, e-catalogues, etc.). The situation was similar in the planning and development process, with device information

43、 frequently being duplicated in a number of different information technology (IT) systems. Any method that is capable of recording all existing information only once during the planning and ordering process and making it available for further processing, gives all parties involved an opportunity to

44、concentrate on the essentials. A precondition for this is the standardization of both the descriptions of the objects and the exchange of information. The IEC 61987 series proposes a method for standardization which will help both suppliers and users of process control equipment to optimize workflow

45、s both within their own companies and in their exchanges with other companies. Depending on their role in the process, engineering firms may be considered here to be either users or suppliers. The method specifies process control equipment by means of blocks of properties. These blocks are compiled

46、into Lists of Properties (LOPs), each of which describes a specific equipment (device) type. The IEC 61987 series covers both properties that may be used in an inquiry or a proposal and detailed properties required for integration of the equipment in computer systems for other tasks. IEC 61987-10 de

47、fines structure elements for constructing lists of properties for electrical and process control equipment in order to facilitate automatic data exchange between any two computer systems in any possible workflow, for example engineering, maintenance or purchasing workflow and to allow both the custo

48、mers and the suppliers of the equipment to optimize their processes and workflows. IEC 61987-10 also provides the data model for assembling the LOPs. IEC 61987-11 while specifying a generic structure for measuring equipment provides several important detail descriptions, such as the handling of comp

49、osite devices that are also required for LOPs describing devices of other areas like the automated valves. IEC 61987-21 specifies the generic structure for Operating and Device Lists of Properties (OLOPs and DLOPs) for automated valves. It lays down the framework for further parts of IEC 61987 in which complete LOPs for final control elements of different construction and functional principle will be specified. The generic structure may also serve as a basis for the specification of LOPs for other indus